Specifications
Description SGMGV-44ADA21 is a Motors-AC Servo produced by Yaskawa
Servomotor Type SGMGV Sigma V High-torque type
Rated Output 4.4KW
Rated Current 32.8A
2.8N.m
1500r/min
Ins F
Power Supply Voltage 200VAC
Serial Encoder 20-bit Incremental
Design Revision Order Standard
Shaft End Straight with key and tap
Options Without options
Control Standard
- Model Number:SGMGV-09ADA61
- Power Supply:DC
- Motor Type:Amplifier
- is_customized:yes
- Install Style:Plug-in
- Frequency:High Frequency
- Function:Power Triode
- Construction:Point Contact Type
- Structure:PNP
- Type:Amplifier
- Special Function:Common Point Contact Diode
- Usage:Light-emitting Diode
: These items and torque-motor speed characteristics quoted in
combination with a SERVOPACK are at an armature winding temperature
of 20˚C. Notes: 1 The values in parentheses are for servomotors
with holding brakes. 2 The above specifications show the values
under the cooling condition when the following heat sinks are
mounted on the servomotors. SGMGV-03D/-05D: 250 mm × 250 mm × 6 mm
(aluminum) SGMGV-09D/-13D/-20D: 400 mm × 400 mm × 20 mm (iron)
SGMGV-30D/-44D/-55D/-75D: 550 mm × 550 mm × 30 mm (iron)
SGMGV-1AD/-1ED: 650 mm × 650 mm × 35 mm (iron)
Separate the servomotor main circuit cable wiring from the I/O
signal cable and encoder cable at least 30 cm, and do not bundle or
run them in the same duct. x When the main circuit cable length
exceeds 20 m, note that the intermittent duty zone of the
Torque-Motor Speed Characteristics will shrink as the line-to-line
voltage drops.
Notes: 1 Servomotor-end connectors (receptacles) are
RoHS-compliant. Contact the respective connector manufacturers for
RoHS-compliant cable-end connectors (not provided by Yaskawa). 2
Servomotor-end connectors (receptacles) can be used with MS plugs.
For the model number of the MS receptacle, refer to the receptacle
number in parentheses and select the appropriate plug.
0.85 to 15 kW servomotors require servomotor-end connector and
brake power supply connector. The servomotor-end connector is the
same as is used for servomotors without holding brakes.
To order a brake power supply connecter kit (0.85 to 15 kW) with
the order no. below, contact your Yaskawa representative. Connector
Type S: Straight plug A: L-shaped plug Bush Size*1 S : Size S (4.0
dia. to 6.0 dia.) M : Size M (6.0 dia. to 9.0 dia.) L : Size L (9.0
dia. to 11.6 dia.) Contact Pin Size S2: Soldered C3: Crimped type*2
*1: A size-M connector kit is available as a standard equipment.
*2: A crimp tool (model: 357J-50448T) by DDK Ltd. is required.
OTHER SUPERIOR PRODUCTS
Yasakawa Motor, Driver SG- | Mitsubishi Motor HC-,HA- |
Westinghouse Modules 1C-,5X- | Emerson VE-,KJ- |
Honeywell TC-,TK- | GE Modules IC - |
Fanuc motor A0- | Yokogawa transmitter EJA- |
Contact person: Anna
E-mail: wisdomlongkeji@163.com
Cellphone: +0086-13534205279