OURUIDA CO.,LTD |
Verified Suppliers
|
|
Electromagnetic induction heating equipment Description :
Built-in process-type temperature PID closed loop;
Fully air-cooled structure for high reliability;
DSP and ARM dual chip control;
Fast automatic phase frequency tracking technology
four operating modes and multi-mode combinations;
RS232/485 , MODBUS protocol, support for industrial
Ethernet, WIFI, Bluetooth and other transmission;
online parameter setting;
alarm and fault logging;
Local control and remote control
7 x 24 continuous operation;
built-in insulation resistance online monitoring
function;
Equipment components
The entire heating system consists mainly of the
control system and the heating unit.
Model | DHI-60KW | DHI-100KW | DHI-120KW | DHI-160KW | DHI-200KW | DHI-300KW | ||||||
Rated output power | 60KW | 100KW | 120KW | 160KW | 200KW | 300KW | ||||||
Transient load rate/cycle time | 0.5/10min | 0.5/10min | 0.5/10min | 0.5/10min | 0.5/10min | 0.5/10min | ||||||
Output power range | 2-100% | 2-100% | 2-100% | 2-100% | 2-100% | 2-100% | ||||||
Frequency range | 0.5—10KHz | 0.5—10KHz | 0.5—10KHz | 0.5—10KHz | 0.5—10KHz | 0.5—10KHz | ||||||
Efficiency | 0.95 | 0.95 | 0.95 | 0.95 | 0.95 | 0.95 | ||||||
Electromagnetic induction heating Features:
1,The control centre unit is integrated in the whole
heating equipment, using the program for control, equipped with
data communication interface, which can realize data remote
transmission and remote control, and can be docked with SCADA
system.
2,The system has a comprehensive alarm function, when
there is a fault or operation error on site, the equipment can be
alarmed, shut down and give the corresponding fault solution.
3,The control system can be connected to an external
temperature sensor (supporting infrared thermometer, thermocouple,
PT100), which can achieve closed-loop control of heating
temperature and heating according to the edited temperature curve.
Heating unit
Insulation layer: glass fibre blanket can be used (or
not depending on the situation);
2, electromagnetic heating wire: for the use of working
conditions, the electromagnetic heating wire can be wound directly
on the workpiece for heating. Generally use high specification
enameled wire or high temperature resistant electromagnetic wire;
3,Thermal heating: applicable to oil and gas pipeline
preheating before welding and welding in the accompanying heat.
Made of heat insulation material and enameled wire;
4,Clamp coil: applicable to oil and gas pipeline
preheating before welding. The whole structure is hinged and can be
opened and closed, which can be used with the field work vehicle.