Home Companies Uonel Co.Limtied

OptiX OSN 8800 TN11TOM01 8 x multi-rate ports service processing board-- OSN8800

Active Member

Contact Us

[China]

Address: B-1906,Zhantao-Tech mansion ,Minzhi road 1079,longhua Dis,shenzhen 518110 China

Contact name:Leo yang

Uonel Co.Limtied

OptiX OSN 8800 TN11TOM01 8 x multi-rate ports service processing board-- OSN8800

Country/Region	china
City & Province	shenzhen
Categories	Solar Chargers

Product Details

Function and Feature

The TOM board achieves cross-connection at the electrical layer, and to provide OTN interfaces and ESC.

For detailed functions and features, refer to Table 1.

NOTE:

ODU0 is only supported by the TN52TOM in the OptiX OSN 8800.

Table 1 Functions and features of the TOM board

Function and Feature	Description
Basic function	Performs conversion between client services at rates within the range of 100 Mbit/s to 2.67 Gbit/s and ODU0 or ODU1 signals when functioning as a tributary board. Performs conversion between client services at rates within the range of 100 Mbit/s to 2.67 Gbit/s and OTU1 signals when functioning as a tributary-line board. Supports convergence of multiple services into one ODU0 or ODU1 signal. The TOM board supports multiple application scenarios. For details, see Application Overview.
Client-side service type	FE: Ethernet service at a rate of 125 Mbit/s GE: Ethernet service at a rate of 1.25 Gbit/s. Supports GE optical signals and GE electrical signals. OTU1: OTN service at a rate of 2.67 Gbit/s STM-1/OC-3: SDH/SONET service at a rate of 155.52 Mbit/s STM-4/OC-12: SDH/SONET service at a rate of 622.08 Mbit/s STM-16/OC-48: SDH/SONET service at a rate of 2.5 Gbit/s FC100: SAN service at a rate of 1.06 Gbit/s FC200: SAN service at a rate of 2.12 Gbit/s FICON: SAN service at a rate of 1.06 Gbit/s FICON Express: SAN service at a rate of 2.12 Gbit/s HD-SDI: Bit-serial digital interface for high-definition television systems at a rate of 1.49 Gbit/s DVB-ASI: Video service at a rate of 270 Mbit/s SDI: Serial digital interface at a rate of 270 Mbit/s ESCON: SAN service at a rate of 200 Mbit/s FDDI: SAN service at a rate of 125 Mbit/s NOTE: When the TOM board transmits GE electrical signals, it is recommended that the board be equipped with at most two GE electrical modules to facilitate fiber routing. you are advised to install electrical modules at the RX1/TX1 and RX2/TX2 ports. The TOM board supports access of SDI, HD-SDI, and DVB-ASI electrical signals. When the board is used to accept these electrical signals, a digital video O/E converter must be used for O/E or E/O conversion and the optical module of the converter must agree with the board optical module specifications. The digital video O/E converter is a third-party device. Customers can purchase a digital video O/E converter by themselves. Only the TN52TOM board supports access of SDI, HD-SDI signals.
Cross-connect capabilities	OptiX OSN 8800: TN52TOM Supports the cross-connection of four ODU1 signals or eight ODU0 signals through the cross-connect bus on the backplane and the cross-connect board. OptiX OSN 6800: TN11TOM Supports the cross-connection of four ODU1 signals between the TOM and the cross-connect board. Supports the cross-connection of four ODU1 signals to the paired slots through the backplane. Supports the cross-connection of a maximum of eight channels of GE signals between the TOM and the cross-connect board. Supports the cross-connection of a maximum of eight channels of GE signals to the paired slots through the backplane. Supports the transmission of maximum of eight signals at the rate between 100 Mbit/s and 2.5 Gbit/s to the paired slots through the backplane. TN52TOM Supports the cross-connection of four ODU1 signals between the TOM and the cross-connect board. Supports the cross-connection of six channels of GE signals to the paired slots through the backplane. Supports the transmission of six signals at the rate between 100 Mbit/s and 2.5 Gbit/s to the paired slots through the backplane. OptiX OSN 3800: TN11TOM Supports the cross-connection of four channels of ODU1 signals from one board of the mesh group (consisting of four boards) to the other three boards belonging to the mesh group. Supports the cross-connection of a maximum of eight channels of GE signals from one board of the mesh group (consisting of four boards) to the other three boards belonging to the mesh group. Supports the cross-connection of a maximum of eight signals at the rate between 100 Mbit/s and 2.5 Gbit/s from one board of the mesh group (consisting of four boards) to the other three boards belonging to the mesh group. TN52TOM Supports the cross-connection of four channels of ODU1 signals between one board of the mesh group (consisting of four boards) and any two boards in the non-paired slots of the four-slot mesh group, that is, supports the ODU1 cross-connection between slots IU2 and IU4, slots IU2 and IU5, slots IU3 and IU4, and slots IU3 and IU5. Supports the cross-connection of six channels of GE signals between one board of the mesh group (consisting of four boards) and the paired slot of the four-slot mesh group, that is, supports the GE cross-connection between slots IU2 and IU3 and slots IU4 and IU5. Supports the cross-connection of six signals at the rate between 100 Mbit/s and 2.5 Gbit/s, except ODU1 signals, between one board of the mesh group (consisting of four boards) and the paired slot of the four-slot mesh group, that is, supports the cross-connection of six signals at the rate between 100 Mbit/s and 2.5 Gbit/s, except ODU1 signals, between slots IU2 and IU3 and slots IU4 and IU5.
OTN function	The mapping process is compliant with ITU-T G.7041 and ITU-T G.709. Supports the frame format and overhead processing by referring to the ITU-T G.709. Supports the SM and TCM functions at the OTU1 and ODU1 layers on the WDM side. Supports the PM and TCM non-intrusive monitoring functions at the ODU1 layer. Supports the PM functions at the ODU1 layers. TN52TOM supports the PM function at the ODU0 layer.
WDM specification	Supports ITU-T G.694.1-compliant DWDM specifications. Supports ITU-T G.694.2-compliant CWDM specifications.
ESC function	Supported.
FEC coding	Supports forward error correction (FEC) on the client side that complies with ITU-T G.709, only when the service type is OTU1.
Alarm and performance event monitoring	Monitors BIP8 bytes (Poisson mode or Bursty mode) to help locate line failures. Monitors B1 bytes to help locate faults. Monitors parameters such as the bias current, temperature, and optical power of the laser. Monitors OTN alarms and performance events. Supports the remote monitoring (RMON) of Ethernet services. NOTE: Only the TN11TOM supports Poisson mode.
ALS function	Supports the ALS function on the client side.
PRBS test function	Supports the PRBS function on the client side and WDM side. NOTE: The PRBS function on the client side is supported only when the client-side service type is STM-1/OC-3, STM-4/OC-12, or STM-16/OC-48.
LPT function	The board supports the LPT function only when the client-side service type is FE or GE.
Test frame	The board supports the test frame function only when the client-side service type is FE or GE.
Latency measurement	Not supported
IEEE 1588v2	Not supported
Physical clock	Not supported
Optical-layer ASON	Not supported
Electrical-layer ASON	Supported by the TN52TOM.
Protection scheme	OptiX OSN 3800/OptiX OSN 6800: Supports SW SNCP. Supports client 1+1 protection. Supports intra-board 1+1 protection (when working with the OLP/DCP/QCP board). Supports OWSP protection. Supports ODUk SNCP. Supports tributary SNCP protection. Supports MS SNCP protection. OptiX OSN 8800: Supports SW SNCP. Supports client 1+1 protection. Supports intra-board 1+1 protection (when working with the OLP/DCP/QCP board). Supports OWSP protection. Supports ODUk SNCP. Supports tributary SNCP protection. NOTE: When the board receives OTN services, SDH/SONET services the board supports tributary SNCP protection. For the TN52TOM board, ODU0 tributary SNCP protection is supported only in ODU1_ODU0 mode (OTU1->ODU1->ODU0).
Ethernet service mapping mode	Supports encapsulation of GE services in GE(GFP-F) (displayed as GE on the NMS) and GE(GFP-T) modes.
Ethernet port working mode	Auto-Negotiation 1000M Full-Duplex
Port MTU	The value ranges from 1518 to 9600, in bytes. That is, the maximum size of the supported Jumbo frame is 9600 bytes.
Loopback	WDM side	Inloop	Supported
	WDM side	Outloop	Supported NOTE: When being used as tributary & line board, the TOM board only supports the loopback between ClientLP1-ClientLP4.
	Client side	Inloop	Supported
	Client side	Outloop	Supported
	Channel	Inloop	Supported
	Channel	Outloop	Supported
Protocols or standards compliance	Protocols or standards for transparent transmission (non-performance monitoring)	IEEE 802.3u IEEE 802.3z ITU-T G.707 ITU-T G.782 ITU-T G.783 GR-253-CORE Synchronous Optical Network (SONET) Transport Systems: Common Generic NCITS FIBRE CHANNEL PHYSICAL INTERFACES (FC-PI) NCITS FIBRE CHANNEL LINK SERVICES (FC-LS) NCITS FIBRE CHANNEL FRAMING AND SIGNALING-2 (FC-FS-2) NCITS FIBRE CHANNEL BACKBONE-3 (FC-BB-3) NCITS FIBRE CHANNEL SWITCH FABRIC-3 (FC-SW-3) NCITS FIBRE CHANNEL - PHYSICAL AND SIGNALING INTERFACE (FC-PH) NCITS FIBRE CHANNEL SINGLE-BYTE COMMAND CODE SETS-2 MAPPING PROTOCOL (FC-SB-2) SMPTE 292M Bit-Serial Digital Interface for High-Definition Television Systems ETSI TR 101 891 Professional Interfaces: Guidelines for the implementation and usage of the DVB Asynchronous Serial Interface (ASI) SMPTE 259M 10-Bit 4:2:2 Component and 4fsc Composite Digital Signals - Serial Digital Interface NCITS SBCON Single-Byte Command Code Sets CONnection architecture (SBCON) ANSI X3.139 Information Systems - Fiber Distributed Data Interface (FDDI) - Token Ring Media Access Control (MAC) ANSI X3.148 Information Systems - Fiber Distributed Data Interface (FDDI) - Token Ring Physical Layer Protocol (PHY) ANSI X3.166 Information Systems - Fiber Distributed Data Interface (FDDI) Physical Layer Medium Dependent (PDM)
Protocols or standards compliance	Protocols or standards for service processing (performance monitoring)	ITU-T G.805 ITU-T G.806 ITU-T G.709 ITU-T G.872 ITU-T G.7710 ITU-T G.798 ITU-T G.874 ITU-T M.3100 ITU-T G.874.1 ITU-T G.875 ITU-T G.808.1 ITU-T G.841 ITU-T G.8201 ITU-T G.873.1 ITU-T G.694.1 ITU-T G.694.2

Mechanical Specifications

Dimensions of front panel (H x W x D): 264.6 mm (10.4 in.) x 25.4 mm (1.0 in.) x 220 mm (8.7 in.)
Weight:
TN11TOM: 1.4 kg (3.1 lb.)
TN52TOM: 1.5 kg (3.3 lb.)

Power Consumption

Board	Typical Power Consumption (W)	Maximum Power Consumption^a (W)
TN11TOM	55	60
TN52TOM	81	89.1
a: The maximum power consumption is the power consumed by the board when it works normally under the highest ambient temperature.

Delivery

Cargo will be delivered within 1 day after payment arrived. Tracking Number will be offered once delivery done.

Delivery Options	Estimated Delivery Time
DHL	3-5 business days
Fedex	3-5 business days
By Sea	10-20 business days

Notice:

Above mentioned information are just for your reference only,we will keep you posted for the tracking delivery schedule.There are two delivery options available for by air and by sea:

Deliver to port:

Uonel is responsible for transporting goods to port. All subsequent customs and transportation fees are the
responsibility of the buyer. Uonel will recommend trustworthy local freight forwarders to you.Uonel can facilitate the progress under buyer's permission and at buyer's expense.

Deliver to door:

Uonel will quote all destination charge prior once we have confirmed order.
Uonel is responsible for transporting goods to door after you have made the payment.

Warranty

100% Low Price Guarantee:
Uonel provides high-quality products at low wholesale prices

100% Quality Assurance:
All items are ORIGINAL NEW and GENUINE only.

Free Technical Support:

Our FREE Huawei Expert Consultancy Support is over the phone, by chat, by email or by login remotely.

100% Money Back Guarantee:
You can contact our customer service team to exchange or return any product that you bought from us.

Flexible Secure Payment & Shipment:
Verified authorization: Mcafee Secure, VeriSign Secured

Return Material Authorization (RMA) Process

Standard Hardware Warranty Policy:

Original new sealed Huawei product: 1 Year

The Support Contacts:

If your Huawei products failed, you must contact your sales representative to verify product failure. If the problem still can't correct by remote support methods i.e. email or phone support, the RMA procedure will issue.

Company Profile

Uonel is one of the biggest Huawei Network Hardware distributor in china, founded in 2008. We are a global provider of netwotking products with more than 5000 customers.

We provide original new Huawei Routers,Switches,Firewalls,Wireless APs & controllers,OLTs,GPON modems,optical transceivers.Our company have more than $5million Huawei products in stock.

Most of our technical engineers had work exprience in Huawei company,we can provide network design&planning,configration,troubleshooting,maintenance and training service in world wide.