Scrap Production Line product description
Scrap steel crushing production line
consists of chain plate loading conveyor; heavy-duty shredder
(optional equipment); scrap steel crusher; vibrating discharging
machine; finished material belt conveyor; magnetic separation
separator; PLC electrical control and operating system; dust
removal system; video monitoring system, hammer changing device and
so on.
This scrap steel crushing production
line is suitable for the crushing of waste light steel and thin
materials, such as waste car body (removing engine, gearbox, tires,
etc.); tinplate (color steel tiles, iron drums, cans, etc.);
household appliances (removing motors, compressors, shafts, etc.);
bicycles, trucks, fences, and similar life wastes; cans (paint
drums, oil drums, chemical drums, etc.); other steel scrap (such as
density of less than 0.6 of the package, the thickness of steel
plate, steel plate ≤ 5mm, the thickness of ≤ 5mm) ≤ 5mm steel
plate, steel sections, steel structural parts), etc.
Scrap Production Line working principle
When the scrap steel crushing production
line works, refer to the operating instructions in accordance with
the sequence of opening the electronic control system, start the
equipment. Then use the special loader (or grapple machine) will be
light steel thin metal waste, poured into the chain plate loading
conveyor (or belt loading conveyor), from the chain plate loading
conveyor, sent to the heavy-duty shredder for pre-crushing,
crushing to the side length of 400mm or so, by the semi-finished
product belt conveyor sent to the scrap steel crusher, the use of
crushing hammer high-speed powerful blow, shear, crushed to 50mm or
so dense square ball blocks It will fall into the vibrating
discharger below, and then fall into the belt conveyor to be sent
to the magnetic separation machine for separating, separating the
non-magnetic material, and then sent out by the waste belt
conveyor, and the iron and steel will be sent out by the finished
material belt conveyor.
This scrap steel crushing production
line is equipped with dust collection system, which is composed of
cyclone dust collector and bag type dust collector, and the dust
collector is installed in the inlet and outlet of heavy shredder,
inlet and outlet of scrap steel crusher, and the separation port of
magnetic separation machine respectively. First use the high
negative pressure of the cyclone dust collector high-power fan to
collect the coarse particles in the dust, and then use the high
negative pressure of the bag-type dust collector high-power fan to
adsorb the fine particles in the bag, and regularly and
automatically vibrate to clean up the bag to collect, to meet the
national environmental standards.
This production line is equipped with
monitoring system, the operator will be the production process of
important links at any time to view, always observe the heavy-duty
shredder, scrap steel crusher feed, magnetic separation machine,
dust collection system operation, the use of PLC master control
operating system at any time to control all equipment start and
stop, control, adjustment, etc., always let the whole scrap steel
crushing production line running well.
The production capacity of this scrap
steel crushing production line can be designed according to the
customer's requirements, configured with different specifications
and models of equipment, a single production line can reach
1-50t/h.
Scrap Production Line Technical Parameters