High Speed Fine Wire Drawing Machine 14DS Magnetic Brake Weight Balance By Swing Arm

HXE-14DS Fine Aluminium wire drawing machine
 
I. Quick details
 
   14DS Fine aluminium wire drawing machine is used to drawing aluminium wire from 1.6mm to 0.6mm.
 
II. Components
 

 
III. Specifications
 
1. Inlet wire diameter:1.6mm
2. Outlet wire diameter:0.6mm
3. Speed:1500mpm
4. Dies number:14
5. Slip ratio of machine:No.1 -No.13:15%, No.14: 8%
6. Wire drawing mode:standing-mode and 2 axes
7. Driver: by dual inverters control, Brand: Inovance,Chinese famous brand, made in Shenzhen.
8. Main motor: 15KW AC 3 phase motor
9. Spooler motor:5.5KW AC 3 phase motor
10. Motor brand: Wan Nan motor, China classical brand
11. Capstan:steel with ceramic coating,
12. Max capstan diameter:316mm
13. Max fix speed capstan:268mm
14. Machine structure:cast iron
15. Transmission: by Synchronous belts
16. Tension control:weight balance by swing arm
17. Spool size: 300mm-400mm
18. Take up: shaft type
19. Receiving weight:50-80kg/max
20. Brake: magnetic brake
21. Drawing Lubrication: spray
22. Power source: (customized)
23. Machine dimension:2600L*1600W*1930H
24. Machine weight: 2200KG
 
IV. Advantage and after-sale service
 
A: Advantage
 
(1). HENGXIE has some world famous parts suppliers, has special lubrication system for the gears and bearing.
(2). Body and other key components and parts are produced by our own factory , quality is reliable.
(3). Our company’s developing process in more than 10 years.
 
B: After-sale service
 
Our company for all machine product, since the shipment date, our company free after sale maintenance service guarantee period is:
(1) 1 year for mechanical part.
(2) 6 month for electrical part.
 
V. Through the dies
 
Use pliers to break the wire to get a smaller section.
Use pliers to make the wire through the dies, then pull the wire out. Pay attention to the dies` front and back.
If wire breaks can use Cold welding machine to fix.
 
VI. Operation and precautions
 
1. Make sure the machine is clean.
2. Power source.
3. Ground wire grounded.
4. Lubrication oil should be clean.
5. The spool is well fixed to the machine.
6. The pay-off shelf is ok..
7. No leak from the machine.
8. Make sure the dies are in the right positions.
9. Adjust the traverse width to fit the spool.
10. The cooling fan.
11. Machine foundation is fixed securely.
12. Lubrication pipes are ok, no block.
 
VII. Installation
 
The machine should be installed in the flat clean, well-ventilated ground, shock-absorbing rubber block on the base of the machine, placed by horizontal correction.
Use the foundation screws to fix the four sides of the machine on the ground to ensure that the machine is in operation, no vibrate.
Electrical control box RST terminal for the external power cord, ground wire terminal must be grounded.