High Speed Fine Copper Wire Drawing Machine 2200KG 316mm Max Capstan Diameter

HXE-14DS Fine copper wire drawing machine

   14DS Fine copper wire drawing machine is used to drawing copper wire from 0.8mm-1.6mm to 0.25mm-0.6mm.

I. Specifications

1. Inlet wire diameter: 0.8mm-1.6mm. Outlet wire diameter: 0.25mm-0.6mm. Speed: 1500mpm. Dies number: 14. Slip ratio of machine: No.1 -No.13: 15%, No.14: 8%. Wire drawing mode: standing-mode and 2 axes.

2. Control system: by dual inverters control, Brand: Inovance, Chinese classical brand. Main motor: 15KW AC 3 phase motor. Spooler motor: 5.5KW AC 3 phase motor. Motor brand: Wan Nan (WN) motor, China classical brand.

3. Capstan: steel with ceramic coating, Max capstan diameter: 316mm. Max fix speed capstan: 268mm

Machine structure: cast iron. Transmission: by Synchronous belts. Tension control: weight balance by swing arm.

4. Spool size: 300mm-400mm. Take up: shaft type. Receiving weight: 50-80kg/max. Brake: magnetic brake

Drawing Lubrication: spray. Power source: (customized). Machine dimension: 2600L*1600W*1930H

Machine weight: 2200KG.

II. Components

III. Advantage and after-sale service

A: Advantage

(1). HENGXIE has some world famous parts suppliers, has special lubrication system for the gears and bearing.

(2). Body and other key components and parts are produced by our own factory , quality is reliable.

(3). Our company’s developing process in more than 10 years.

B: After-sale service

Our company for all machine product, since the shipment date, our company free after sale maintenance service guarantee period is:

(1) 1 year for mechanical part.

(2) 6 month for electrical part.

      Under these situation mentioned, the Seller will not take responsibility, but if the Buyer agree, will charge fees accordingly to repair the machine.

1. Due to wrong operation while shipping.

2. Due to Buyer`s wrong preparation that may cause damage to the machine.

3. Due to Buyer`s wrong operation that may cause damage to the machine.

4. Not in the consuming part list.

5. After agreement are made for the shipping, for any damage, Buyer should inform Seller in letter form to repair in seven days, If beyond the dare, Seller shall take no responsibility.

6. For any other failures due to acts of God (such as lightning, typhoon, earthquake, riots, war, fire or flood) and other factors that will cause damage, Seller shall take no responsibility.

Seller guarantee provide long term support regarding the parts and teach. After warranty, will charge accordingly.

IV. Through the dies

4-1.Use pliers to break the wire to get a smaller section.

4-2.Use pliers to make the wire through the dies, then pull the wire out. Pay attention to the dies` front and back.

4-3.If wire breaks can use Cold welding machine to fix.

V. Operation and precautions

1. Make sure the machine is clean. Power source. Ground wire grounded. Lubrication oil should be clean.

The spool is well fixed to the machine. The pay-off shelf is ok.. No leak from the machine. Make sure the dies are in the right positions.

2. Adjust the traverse width to fit the spool. The cooling fan. Machine foundation is fixed securely. Lubrication pipes are ok, no block.