AC 22KW Wire Take Up Machine , 1500mpm Copper Wire Down Coiler Without Shake

HXE-WF 800 Copper rod Coiler wire take up machine

I. Application

    WF800 Copper rod coiler wire take up machine is used to take up wire from 1.2mm to 3.0mm.

II. Main technical parameter 

1. Applicable diameter 1.2mm-3.0mm

2. Motor AC 22kw, Speed 1500m/min, adjustable

3. Coiler basket size 800mm

4. Small electric cabinet, 1 set, to connect with the drawing machine control system

5. Tension device required, if your drawing machine has Tension device, then no need.

6. Traverse motor AC 1.5kw

7. Speed reduction motor 90w

8. Speed control by Inverter 22kw

9. Air compressor shall be needed during work

10. Basket changing system is equipped

11. Basket block device is equipped

11. All ladders and blockers (Yellow parts) (Screws to fix) will be removed before shipping

12. The machine is a whole piece to achieve running in high speed without shake

13. Needs connection wires from the Coiler to the drawing machine control system

III. Working Environment

3-1.Not more than 1000 meters above sea level.

3-2.Temperature －10℃－40℃

3-3.Relative temperature does not exceed 85% (25 ℃)

IV. Working Condition

4-1.Maximum air consumption 0.3 cubic meter per minute

4-2.Compress air capacity 225L

4-3.Air pressure 0.4Mpa

4-4.Cooling tank capacity 225L

4-5.Steam capacity 2kg/hour

4-6.Steam pressure 0.2-0.3Mpa

V. Lifting the machine, installation, adjustment

5-1.Lifting, there are four lifting rings to lift.

5-2.Installation, please check the external drawing and foundation drawing of the machine, dig the ground, put the machine in position, check the horizontal level, adjust the ground screws, put concrete slurry, after dry and fix, check the horizontal level again, then fix the machine by the ground screws.

5-3.Adjustment, clean all parts, check all the part no loose.

VI. Advantage and after-sale service

A: Advantage

(1). HENGXIE has some world famous parts suppliers, has special lubrication system for the gears and bearing.

(2). Body and other key components and parts are produced by our own factory , quality is reliable.

(3).  Our company’s developing process in more than 10 years.

B: After-self service

Our company for all machine product, since the shipment date, our company free after sale maintenance service guarantee period is:

(1) 1 year for mechanical part.

(2) 6 month for electrical part.