Copper / Aluminium Single Spooler Triangle Belts Transmission For Wire Drawing Machine

 HXE-High Speed WS630 Single spooler for wire drawing machine

I. Quick details

     High Speed WS630 single spooler for wire drawing machine is used to take up wire from 1.2mm to 4mm.

II. Main technical parameter

1. Applicable bobbin size 500mm--630mm

2. Applicable wire range 1.2mm-4.0mm

3. Motor AC22kw*1set, WanNan brand, with Inovance Inverter control

4. Outside cover is provided

5. All wire passing wheels are AL and ceramic coating treatment

6. Power transmission is by triangle belts

7. Pneumatic Disc break

8. Reduce motor 90W for wire traverse

9. With three Cylinders to pneumatically load and fix bobbin

10. With 2 limit switches to auto traverse

11. Spare parts for one year is provided with the machine

III. Working Environment

3-1. Not more than 1000 meters above sea level.

3-2. Temperature －10℃－40℃

3-3. Relative temperature does not exceed 85% (25 ℃)

IV. Working Condition

4-1. Maximum air consumption 0.3 cubic meter per minute

4-2. Compress air capacity 225L

4-3. Air pressure 0.4Mpa

4-4. Cooling tank capacity 225L

4-5. Steam capacity 2kg/hour

4-6. Steam pressure 0.2-0.3Mpa

V. Attention

5-1. If wire breaks, will stop automatically, and the Fault Indicator light will open.

After connect the wire, press the Fault Reset button(Yellow button) and the On button (Green button), to run the machine again.

5-2. Press Emergency Stop button(Red button) to shut down the machine immediately.

After solve, press the button again to run the machine.

5-3. After set the Length-counter, the machine will stop automatically when reach the length set.

After change the Spool, please press the Length Reset button(Yellow button) and the Spool Reset button(Yellow button) to run the machine again.

5-4. After the machine stop(no running at all), then switch the Pump switch to stop the lubrication.

5-5. Do not touch the wire in the Annealing section.

5-6. After shut down the machine, need at least 30 seconds to restart the machine.

5-7. Wire often breaks, adjust the speed, balance arm, check the dies are clean or not.

5-8. If has scratch on the surface of the wire, check the capstans on the Take-up part. Check the drawing capstans.

VI. Advantage and after-sale service

A: Advantage

(1). HENGXIE has some world famous parts suppliers, has special lubrication system for the gears and bearing.

(2). Body and other key components and parts are produced by our own factory , quality is reliable.

(3). Our company’s developing process in more than 10 years.

B: After-sale service

Our company for all machine product, since the shipment date, our company free after sale maintenance service guarantee period is:

(1) 1 year for mechanical part.

(2) 6 month for electrical part.

     Under these situation mentioned, the Seller will not take responsibility, but if the Buyer agree, will charge fees accordingly to repair the machine.

A. Due to wrong operation while shipping.

B. Due to Buyer`s wrong preparation that may cause damage to the machine.

C. Due to Buyer`s wrong operation that may cause damage to the machine.

D. Not in the consuming part list.

E. After agreement are made for the shipping, for any damage, Buyer should inform Seller in letter form to repair in seven days, If beyond the dare, Seller shall take no responsibility.

F. For any other failures due to acts of God (such as lightning, typhoon, earthquake, riots, war, fire or flood) and other factors that will cause damage, Seller shall take no responsibility.

G. Seller guarantee provide long term support regarding the parts and teach. After warranty, will charge accordingly.