Nanjing Saiko Controls Co.Ltd |
|
General:
Electric room Floor Heating Thermostat for Commercial
buildings is used for 2-position control with on/off output
for the control the temperature by means of an NTC sensor placed
externally or internally in the thermostat.The thermostat acquires
the room temperature with its built-in sensor or floor sensor, and
the heating contact will close when the room temperature falls
below the selected set-point.
For the control of warm-water (floor) heating systems
and direct electric heating systems used in Commercial buildings,
Residential buildings, Light industrial buildings
Features:
Payment:
1. We accept payment that aliexpress can accept, We apologize that
we cannot accept other payment methods, such as cheque or postal
orders .
2.All major credit cards are accepted,and we received it in 24
hours
3.Payment must be received within 10 business days of auction
closing
Mounting of floor sensor:
Floor sensor should be placed in installation pipe
which is embed-ded in floor, the pipe is thickened in the end and
placed as high as possible in the concrete layer. Sensor cable may
be extended up to 50 m with separate cable f or power current. Two
conductors in a multi-conducting cable, which e.g. is used for
supply of heating cable, may not be used. Voltage signals, which
may disturb the function of the thermostat, may occur. If the cable
is used with screen,the screen may not be connected to the ground,
but must be
connected to terminal 7, the best installation is attained with a
separate cable for the sensor, which is then mounted in a separate
conduit.
Temperature and Value of floor sensor:
Temperature(℃) | Value(Ω) |
5 | 22070 |
10 | 17960 |
20 | 12091 |
30 | 8312 |
40 | 5827 |
Package Includes:
1 x Heating thermostat
1 x 2.9m sensor cable
2 x Mounting screws
1 x English user manual
Size:
Wiring diagram:
Operation manual:
Temperature Setting:
Thermostat has a scale range of +5/+40 . To assist the adjust-ment, the thermostat has a LED which will glow RED when the heating is ON. The thermostat should be set to maximum temperature setting until the desired temperature of the room or floor is achieved. The control knob should then be turned back until the LED goes out. Fine adjustments can be made over the next 1/2 days to suit individual requirements.
Parts:
Q&A:
A: If you want the parcel to be tracked , please choose the China post air mail, Singapore post, or Express
A: We have declared the packing detail on the description of each product, please check it, Thank you !
A: If you would like to buy large quantity, please send email to us, we will give you the best price, thanks!