Results forflame spread testfrom 3891 Products.
|
Steiner Tunnel Test Apparatus Product introduction UL910 covers the test method for determining values of flame-propagation distance and optical smoke density for electrical and ...
|
|
|
|
NFPA 1971-2007 Fire Helmet Fire Resistance Combustion Test Device Product Introduction Fire helmet fire-resistant combustion test device is developed according to NFPA 1971-2007 ...
|
|
|
|
Product Description: The Flammability Testing Equipment comes with a fully adjustable specimen support to accommodate different types of materials. This feature ensures that the ...
|
|
|
|
Building Materials Flammability Tester Radiant Flooring Panel Apparatus Application Critical Radiant Flux is the main parameters of the fire risk for flooring materials, it ...
|
|
|
|
UL 1666 Cable Installed Vertically in Shafts Fire Testing Machine Testing Standards UL1666, ANSI/ASTM D 5207 & UL 1581, ANSI/ASTM D 5025 UL1666<<Test for flame propagation height ...
|
|
|
|
Wire and Cable Burning Test Product introduction Wire and cable burning level tester is suitable for measuring the flame-retardant properties of single plastic wire, control, cross...
|
|
|
|
Product Description: One of the key features of this product is its gas flow range, which can be adjusted to suit your specific testing needs. With a range of 0.1-1L/min (100...
|
|
|
|
Product Description: The chamber size of the Flammability Testing Equipment is W300 * D450 * H1200mm, providing ample space for testing cables and other materials. The product's ...
|
|
|
|
Product Description: The Gas Flow Controls of the Cable Materials Flammability Tester are of high precision, ensuring that the burning gas is supplied at a consistent rate ...
|
|
|
|
Product Description: The Flammability Testing Equipment comes equipped with precision gas flow controls, allowing you to accurately control the flow of gas during testing. This ...
|
|
|
|
IEC60695-11-03 Single Cable Vertical Flammability Tester Product introduction Single Cable Combustion Tester is the most widely used and lower cost of cable fire performance test ...
|
|
|
|
Over-current Flammability Testing Equipment For Wires and Cables Resistance to Fire Application Applies to check the test integrity of the circuit for wires or cables, use to check ...
|
|
|
|
Large Combustion Cabinet / Carge Combustion Box Uses Large combustion cabinet / large combustion chamber is strictly in accordance with UL1581 sect 1080.1~1080.14 standard, and ...
|
|
|
|
ISO 871 Plastic Ignition Temperature Tester Application According to the GB4610-2008 plastic hot air furnace method, the temperature is measured and designed. It fully complies ...
|
|
|
|
ISO 9239 /ASTM E648 Flooring Radiant Panel Test Equipment Application It is suitable for testing with paving materials that are placed in a small flame and placed horizontally and ...
|
|
|
|
Lab Flammability Testing Equipment , UL1685 Vertical Tray Test Chamber for Cables Application Apply to check the vertical-tray fire test for determining values of cable flame ...
|
|
|
|
Glow-wire Flammability Testing Equipment IEC60695-2-10~13 GB/T5169 Standards According to IEC60695-2-10~13,UL746A, IEC829, DIN695, VDE0471etc. Features 1.The flaming chamber and ...
|
|
|
|
Halogen Release Measurement Device Application Applies to determine total quantity of halogen-free and low halogen flame retardant cable’s halogen acid gas and measure PH value and ...
|
|
|
|
ISO9772 Horizontal and Vertical Flammability Tester with MCU Control Application Suitable for laboratory conditions under the ISO 845: 1985 measured by the density of less than ...
|
|
|
|
Foam Plastics Horizontal and Vertical Flammability Tester with MCU Control Application Suitable for laboratory conditions under the ISO 845: 1985 measured by the density of less ...
|
|
|
You may also be interested in :