Results forfigure v 1 joint test probefrom 68 Products.
|
|
UL Standard / IEC 62368 -1-Figure V.1 Heat-treated steel Steel Jointed Test Probe Simulating Human Finger Movement Application: This jointed Test Finger Probe is strictly designed ...
|
|
|
|
|
Jointed test probe for equipment likely to be accessible to children Reference Standard: IEC62368-1-Figure V.1 Specification: Test Finger Length:234mm The Bending Part Length: 30...
|
|
|
|
|
Jointed test probe for equipment not likely to be accessible to children Reference Standard: IEC62368-1-Figure V.2 Specification: Knurled Finger Diameter:12mm Knurled Finger Length...
|
|
|
|
|
IEC62368 Annex V.1.3 Test method 2 Unjointed test probe Openings tested with straight unjointed test probes Openings preventing access to a part by the applicable jointed test ...
|
|
|
|
|
UL Standard Articulated Jointed Test Finger For Preventing The Finger From Approaching To The Hazardous Parts Test Finger Length: 234mm The Bending Part Length: 30/30/40mm The UL ...
|
|
|
|
|
UL 60335-2-24 Figure 101.DVA.2 Articulate probe with flat and cone shaped hand 10.5 – 11.5 year age Notes: 1 – The probes were designed with a center pin to rotate the hand with ...
|
|
|
|
|
CSA C22.2 No.47-13 Figure 1 Articulated Probe The UL Metal Articulated Probe is a standard articulated finger as required by Underwriters Laboratories in many of their standards. ...
|
|
|
|
|
EN 50636 Figure 1 Test Finger Probe Young Adult Arm Probe Stainless Steel Probe Standard description Our product of Test Finger Probe (see Figure 1)shall not to be able to make ...
|
|
|
|
|
UL 60335-2-24-Figure 101.DVA.1 – Articulate probe with flat and cone shaped hand 3.5 – 4.5 year age Notes: 1 – The probes were designed with a center pin to rotate the hand with ...
|
|
|
|
|
IEC62368 Jointed Test Probe / Finger Length 80mm Diameter 12mm Standard: Conforms to IEC 62368-1:2018 clause 5.3.2, T.3 and Figure V.2, IEC61032 figure 2 test probe B,IEC950 ...
|
|
|
|
|
BS EN 13126 - 5 Figure A . 2 Jointed Test Finger For Windows Restrictor Safety Testing Product information: Test gauges for Windows Restrictor safety testing. 2 pieces a set, gauge ...
|
|
|
|
|
Test Finger Probe B HT-I02 Description: This probe is intended to verify the basic protection against access to hazardous parts. It is also used to verify the protection against ...
|
|
|
|
|
IEC 61032 Figure 2 Test Finger Probe B Standard Jointed Test Finger Product information: This is a precision test finger made in accordance with many standards like IEC 61032 ...
|
|
|
|
|
EN 50636 Young Adult Arm Finger Probe Above 14 Years Old Joint Test Probe The young adult joint arm probe conforms to EN 50636-2-100 figure 1 and IEC 50636-2. It is used to ...
|
|
|
|
|
Children Test Finger Probe 18 and 19 , IEC61032 Jointed Children Test Finger Product information: Children finger probe HT-I12 conforms to IEC61032 figure 12 finger probe 18, ...
|
|
|
|
|
Children Test Finger Probe 18 and 19 , IEC61032 Jointed Children Test Finger Product information: Children finger probe HT-I12 conforms to IEC61032 figure 12 finger probe 18, ...
|
|
|
|
|
Product Description The Rigid Test Finger is a precision test probe made according to Figure 7 (Fig. 7) of the IEC 61032 (Test probe 11) and is used to simulate a human finger. It ...
|
|
|
|
|
IEC62368-1 Clause 4.8 Figure V.1 Jointed Test Probe for Equipment that Children May Be Accessible Product Information: The Jointed Test Probe is designed and manufactured according ...
|
|
|
|
|
IEC 61851-1 Figure V.2 Jointed Test Probe For Electric Vehicle Conductive Charging System Test Product information: This is a precision test finger made in accordance with IEC ...
|
|
|
|
|
IEC 62368-1 Clause V.1.2 and Figure V.2 Jointed Test Probe for Equipment Product information: This is a precision test finger made in accordance with many standards like IEC 62368...
|
|
|
You may also be interested in :
