Results forfigure 7 unjointed test probefrom 27 Products.
|
|
IEC62368 Annex V.1.3 Test method 2 Unjointed test probe Openings tested with straight unjointed test probes Openings preventing access to a part by the applicable jointed test ...
|
|
|
|
|
Test Probe 11 , IEC61032-figure 7 Test Finger Probe , Unjointed test finger According to IEC61032 figure 7 1,Knurled Finger Diameter:12mm 2,Knurled Finger Length:80mm 3,Dam- board ...
|
|
|
|
|
Straight unjointed version of the respective test probe applied with a force of 30N , IEC62368-1-Figure V.1 EC62368-1-cl.4.8 IEC62368-Annex V.1.3 Test method 2 Reference Standard: ...
|
|
|
|
|
IEC 60601-1-Figure 6 Unjointed test finger IEC61032 Figure 2, Diameter: 12mm Length:80mm Insulated portion: Ø50mm, 20mm wide,100mm long TESTING AND MEASURING EQUIPMENT/ALLOWED ...
|
|
|
|
|
IEC62368 Jointed Test Probe / Finger Length 80mm Diameter 12mm Standard: Conforms to IEC 62368-1:2018 clause 5.3.2, T.3 and Figure V.2, IEC61032 figure 2 test probe B,IEC950 ...
|
|
|
|
|
Product Description Complies with IEC61032 Figure 7 Test Rig 11, GB/T16842 Test Probe 11, GB8898, IEC60065, IEC60598, GB7000, IEC60335, GB4706 and other standard requirements. It ...
|
|
|
|
|
IEC 61032 Figure 7 Test Probe 11 IEC 61032 Figure 7 Unjointed Test Probe 11 For Verifying Enclosure Openings Product Overview: This probe conforms to the standard requirements of ...
|
|
|
|
|
IEC 62368-1 Clause V.1.3 and figure V.1 Opening Tested with Straight Unjointed Test Probe 30N Product Information: The Unjointed Test Probe conforms to the standard requirements of ...
|
|
|
|
|
Unjointed Finger Probe Meets The Requirements of IEC61032 Standard Figure 7 1. Introduction: This Unjointed Finger Probe is made for forceful insertion where the flexibility of the ...
|
|
|
|
|
IEC 62368-1 Figure V.1 Stainless Steel Straight Unjoint Test Probe Product overview: The unjoint test probe of figure V.1 conforms to the requirements of IEC 62368-1:2018 clause V...
|
|
|
|
|
IEC 62368-1 Figure V.1 Straight Unjoint Test Probe Product overview: This straight unjointed test probe meets the requirements of IEC 62368-1:2018 clause V.1.3, figure V.1 (but ...
|
|
|
|
|
Test Probe 11 Unjointed Test Finer Probe with 50N Thruster Conforms to IEC61032 1. Introduction of Test Probe 11: The test probe 11 is designed according to IEC61032 figure 7 and ...
|
|
|
|
|
IEC60950-1 Test Probe Kits (Wedge Probe, Jointed Test Finger, Rigid Test Finger and Test Pin) 1. Introduction The test probe kits are meet the requirement of IEC60950-1, includes ...
|
|
|
|
|
IEC61032 Unjointed Test Finger Probe / Rigid Test Finger / Test Probe 11 with 0~50N Thruster 1. Introduction: Test probe 11 (unjointed test finger) is designed according to ...
|
|
|
|
|
UL507 Fig 9.2 Stainless Steel Straight Unjoint Enclosure Protection Test Probe Product overview: The Joint Test Probe of Figure meets the standard requirements of UL507 Fig 9.2 ...
|
|
|
|
|
IEC 62368-1 Figure V.1 Stainless Steel Joint Test Probe Product Overview: This straight unjointed test probe meets the requirements of IEC 62368-1:2018 clause V.1.2 and figure V.1, ...
|
|
|
|
|
IEC61032 Test Finger Probe Figure 7 Test Probe 11 Unjointed Test Finger Standard: IEC 61032 ‘Protection of persons and equipment by enclosures – Probes for verification’ figure 7 ...
|
|
|
|
|
IEC61032 Test Finger Probe Figure 7 Test Probe 11 Unjointed Test Finger Standard: IEC 61032 ‘Protection of persons and equipment by enclosures – Probes for verification’ figure 7 ...
|
|
|
|
|
Product Description Consists of Five test probe: 1) Straight Unjointed Test Probes 2) Figure V.2 - Jointed Test Probe 3) Figure V.3 - Blunt Probe 4) Figure V.4 - Wedge probe 5) ...
|
|
|
|
|
Product Description The Jointed Test Finger & Unjointed Test Finger is a precision test probe made according to Figure 2 (Test Probe B) and Figure 7 (Test Probe 11) of the IEC ...
|
|
|
You may also be interested in :
