Results forfigure 2 jointed standard test probefrom 46 Products.
|
UL Standard / IEC 62368 -1-Figure V.1 Heat-treated steel Steel Jointed Test Probe Simulating Human Finger Movement Application: This jointed Test Finger Probe is strictly designed ...
|
|
|
|
Jointed test probe for equipment likely to be accessible to children Reference Standard: IEC62368-1-Figure V.1 Specification: Test Finger Length:234mm The Bending Part Length: 30...
|
|
|
|
Jointed test probe for equipment not likely to be accessible to children Reference Standard: IEC62368-1-Figure V.2 Specification: Knurled Finger Diameter:12mm Knurled Finger Length...
|
|
|
|
UL Standard Articulated Jointed Test Finger For Preventing The Finger From Approaching To The Hazardous Parts Test Finger Length: 234mm The Bending Part Length: 30/30/40mm The UL ...
|
|
|
|
EN 50636 Figure 1 Test Finger Probe Young Adult Arm Probe Stainless Steel Probe Standard description Our product of Test Finger Probe (see Figure 1)shall not to be able to make ...
|
|
|
|
CSA C22.2 No.47-13 Figure 1 Articulated Probe The UL Metal Articulated Probe is a standard articulated finger as required by Underwriters Laboratories in many of their standards. ...
|
|
|
|
IEC62368 Jointed Test Probe / Finger Length 80mm Diameter 12mm Standard: Conforms to IEC 62368-1:2018 clause 5.3.2, T.3 and Figure V.2, IEC61032 figure 2 test probe B,IEC950 ...
|
|
|
|
Children Test Finger Probe 18 and 19 , IEC61032 Jointed Children Test Finger Product information: Children finger probe HT-I12 conforms to IEC61032 figure 12 finger probe 18, ...
|
|
|
|
Children Test Finger Probe 18 and 19 , IEC61032 Jointed Children Test Finger Product information: Children finger probe HT-I12 conforms to IEC61032 figure 12 finger probe 18, ...
|
|
|
|
IEC 61032 Figure 2 Test Finger Probe B Standard Jointed Test Finger Product information: This is a precision test finger made in accordance with many standards like IEC 61032 ...
|
|
|
|
Test Finger Probe B HT-I02 Description: This probe is intended to verify the basic protection against access to hazardous parts. It is also used to verify the protection against ...
|
|
|
|
IEC 61032 Figure 2 Jointed Standard Test Probe For Equipment Product information: The test finger probe B is intended to verify the basic protection against access to hazardous ...
|
|
|
|
Product Description The Rigid Test Finger is a precision test probe made according to Figure 7 (Fig. 7) of the IEC 61032 (Test probe 11) and is used to simulate a human finger. It ...
|
|
|
|
IP Testing Equipment Test Probe B for IP2X Testing Jointed Test finger Introduction: Design according to IEC61032 figure 2, meet the requirements of UL507, UL1278 figure 8 and ...
|
|
|
|
Articulate Probe with Web Stop / UL Articulated Finger Probe for Accessibility Test / Jointed Test Probe 1. Standard Conforms to: UL858 figure 6.1, IEC62368-1 figure V.1, UL507 ...
|
|
|
|
IEC 61032 Figure 2 Jointed Probe For Equipment And Persons Enclosures Protect Product information: The joint test probe of figure V.2 is in accordance with many standards like IEC ...
|
|
|
|
IEC62368-1 Clause 4.8 Figure V.1 Jointed Test Probe for Equipment that Children May Be Accessible Product Information: The Jointed Test Probe is designed and manufactured according ...
|
|
|
|
Unjointed Finger Probe Meets The Requirements of IEC61032 Standard Figure 7 1. Introduction: This Unjointed Finger Probe is made for forceful insertion where the flexibility of the ...
|
|
|
|
IEC 62368-1 Clause V.1.2 and Figure V.2 Jointed Test Probe for Equipment Product information: This is a precision test finger made in accordance with many standards like IEC 62368...
|
|
|
|
IEC 61032 Figure 12 Test Probe 18 Product Overview: This probe conforms to the standard requirements of IEC 61032 figure 12 test probe 18, IEC 60065:2014 clause 9.1.1.3, etc. This ...
|
|
|
You may also be interested in :