Active Member
|
[China]
Address: 1004-1005 Jiaanda Bldg, No.110 Huafan Rd, Dalang street,Longhua District,518109,Shenzhen China
Contact name:Kanglly Wong
OMC Industry Co.Limited |
|
|
H005 Inline type 8 port Black IP-65-68 PlasticFiber Optic Joint Closure
FOSC is a device which have function of optical transmission link, providing several of fiber optical cable through, branching and related connecting protection. IP safety rate is IP65-68. Some of them can be installed 1x2:32 PLC splitter or 2X2:16 PLC splitter. The product is excellent in sealing performance, easy for installation, wide application. It's your best choice for fiber connection.
OMCH007
1. Scope of application
This Installation Manual is suit for the Fiber Optic Splice Closure (Hereafter abbreviated as FOSC), as the guidance of proper installation.
The scope of application is: aerial, underground, wall-mounting and wall-mounting in duct and handhole. The ambient temperature ranges from -40 to +65℃.
2. Basic structure and configuration
2.1 Dimension and capacity
| Outside dimension (LxWxH) | 450×220×110(mm) |
| Weight (excluding outside box) | 2800g-3300g |
| Number of inlet/outlet ports | 4 (pieces) on each side (total 8 pieces) |
| Diameter of fiber cable | Φ7—Φ20(mm) |
| Capacity of FOSC | Bunchy: 12—96(Cores) Ribbon: max. 144(Cores) |
2.2 Main components
| No. | Name of components | Quantity | Usage | Remarks | |
| 1 | Housing(bottom) | 1 set | Protecting fiber cable splices in whole | Internal diameter: 340*122 (mm) | |
| 2 | Housing(cover) | 1 set | Protecting fiber cable splices in whole | Internal diameter: 340*122 (mm) | |
| 3 | Insert plate | 2 pairs | Fixing the housing | 175x56x30(mm) | |
| 4 | Fiber optic splice tray (FOST) | Max.5 trays (bunchy) or Max.4trays (ribbon) | Fixing heat shrinkable protective sleeve and holding fibers | Suitable for: Bunchy: 12,24(cores) Ribbon: 3 (pieces) | |
| 5 | Foundation | 1 set | Fixing fiber cable, reinforced core and FOST | ||
| 6 | Seal fitting | 1 set | Sealing between FOSC cover and FOSC bottom | ||
| 7 | port plug | 8 pieces | Sealing empty ports | ||
| 8 | Fixed bolt | 1 sets | Fixing the house | ||
2.3 Main accessories and special tools
| No. | Name of accessories | Quantity | Usage | Remarks |
| 1 | Heat shrinkable protective sleeve | Protecting fiber splices | Configuration as per capacity | |
| 2 | Nylon tie | Fixing fiber with protective coat | Configuration as per capacity | |
| 3 | Insulation tape | 1 roll | Enlarging diameter of fiber cable for easy fixing | |
| 4 | Seal tape | 1 roll | Enlarging diameter of fiber cable which fits in with seal fitting | Configuration as per specification |
| 5 | Hanging hook | 1 set | For aerial use | |
| 6 | Earthing wire | 1 piece | Putting through between earthing devices | To put through as per actual requirement |
| 7 | Abrasive cloth | 1 piece | Scratching fiber cable | |
| 8 | Labeling paper | 1 piece | Labeling fiber | |
| 9 | M8 Special wrench | 1 pieces | Fixing bolts of housing and insert plate | |
| 10 | M6 Special wrench | 1 pieces | Fixing small bolts of housing | |
| 11 | M10 Special wrench | 1 piece | Tightening nut of reinforecd core | |
| 12 | Instruction manual | 1 piece | Standard installation |
2.4 package
| NO. | specification | carton size(cm) | capacity | N.W | Remarks |
| 1 | inner box | 46*22*11 | 1pcs | 2.9-3.4KG | Configuration as per weight |
| 2 | outer box | 61*48*47 | 10pcs | 29-34KG | Configuration as per weight |
