Active Member
|
[China]
Address: 1004-1005 Jiaanda Bldg, No.110 Huafan Rd, Dalang street,Longhua District,518109,Shenzhen China
Contact name:Kanglly Wong
OMC Industry Co.Limited |
|
|
H008 Inline type 8 port Black IP-65-68 PlasticFiber Optic
Joint Closure
FOSC is a device which have function of optical transmission link,
providing several of fiber optical cable through, branching and
related connecting protection. IP safety rate is IP65-68. Some of
them can be installed 1x2:32 PLC splitter or 2X2:16 PLC splitter.
The product is excellent in sealing performance, easy for
installation, wide application. It's your best choice for fiber
connection.
OMCH008
1. Scope of application
This Installation Manual is suit for the Fiber Optic Splice Closure
(Hereafter abbreviated as FOSC), as the guidance of proper
installation.
The scope of application is: aerial, underground, wall-mounting,
duct-mounting, handhole-mounting. The ambient temperature ranges
from -40℃ to +65℃.
2. Basic structure and configuration
2.1 Dimension and capacity
| Outside dimension (LxWxH) | 396x200x126 (mm) |
| Weight (excluding outside box) | 2500g-2700g |
| Number of inlet/outlet ports | 3 (pieces) on each side (total 6 pieces) |
| Diameter of fiber cable | Φ7—Φ20 (mm) |
| Capacity of FOSC | Bunchy: 12—96 (Cores) |
2.2 Main components
| No. | Name of components | Quantity | Usage | Remarks | |
| 1 | Housing | 1 set | Protecting fiber cable splices in whole | Internal diameter: | |
| 2 | Insert plate | 1 pairs | Fixing the housing | 175x56x30(mm) | |
| 3 | Fiber optic splice tray | max. 6 pcs (bunchy) | Fixing heat shrinkable protective sleeve and holding fibers | Suitable for: | |
| 4 | Foundation | 1 set | Fixing reinforced core of fiber- cable and FOST | ||
| 5 | Seal fitting | 1 set | Sealing between FOSC cover and FOSC bottom | ||
| 6 | Port plug | 6 pieces | Sealing empty ports | ||
| 7 | Pressure | 1 set | After injecting air, it is used for pressure testing and sealing testing | Configuration as per requirement | |
| 8 | Earthing deriving device | 1 set | Deriving metallic components of fiber cable in FOSC for earthing connection | Configuration as per requirement | |
2.3 Main accessories and special tools
| No. | Name of accessories | Quantity | Usage | Remarks |
| 1 | Heat shrinkable protective sleeve | Protecting fiber splices | Configuration as per capacity | |
| 2 | Nylon tie | Fixing fiber with protective coat | Configuration as per capacity | |
| 3 | Insulation tape | 1 roll | Enlarging diameter of fiber cable for easy fixing | |
| 4 | Seal tape | 1 roll | Enlarging diameter of fiber cable which fits in with seal fitting | Configuration as per specification |
| 5 | Hanging hook | 1 set | For aerial use | |
| 6 | Earthing wire | 1 piece | Putting through between earthing devices | |
| 7 | Abrasive cloth | 1 piece | Scratching fiber cable | |
| 8 | Labeling paper | 1 piece | Labeling fiber | |
| 9 | Special wrench | 3 pieces | Fixing bolts, tightening nut of reinforced core | |
| 10 | Measuring paper | 1 piece | To measure circle, of which its diameter is enlarged with seal tape | |
| 11 | Buffer tube | to be decided by customers | Hitched to fibers and fixed with FOST, managing buffer | Configuration as per requirement |
| 12 | Desiccant | 1 bag | Put into FOSC before sealing for desiccating air. |
2.4 package
| NO. | specification | carton size(cm) | capacity | N.W | Remarks |
| 1 | inner box | 40*20*12.5 | 1pcs | 2.6-2.8kg | Configuration as per weight |
| 2 | outer box | 66*40.5*42 | 10pcs | 26-28kg | Configuration as per weight |
