Active Member
|
[China]
Address: Xingyang Industrial Park,Zhengzhou,Henan,China
Contact name:Andie Tian
BH Mortar Industrial Co., Ltd. |
|
|
Chinese supplier high quality pulse bag house dust collector for machinery
Description:
Pulse bag filter is a kind of dry dust removal device, also known as the filter separator, it is to use fiber knitting bag filter element to capture the dust in the gas solid particles of dust removal device, its action principle is the dust through the filter cloth fiber were intercepted by inertia effect contact with fiber, collected on the filter bag dust regularly by clearing the ash removal device and fall into ash hopper, and then through the ash system to draining out .
Details:
Features:
| 1. It uses full set of computerized design and the design is correct & reliable. |
| 2. The casing uses framework structure with high intensity and good stability, it can be designed according to different pressure and temperature resistant requirements. |
| 3. Gas inlet & outlet type can be designed into various kinds of forms according to technical arrangement and flue gas characteristics, the technical arrangement is flexible and changeable. |
| 4. It uses flow resistance plus flow guidance type gas flow distribution equipment, therefore it has good gas flow evenness without dust blockage. |
| 5. The discharge electrode is properly connected with the frame without wire dropping and breakage. |
| 6. It uses hammer type rapping with lateral arm, the rapping strength transmission is even with good effect, therefore, it is easy to clean the dust. |
Advantages:
1. Excellent filter material ensures dust removal efficiency of up
to 99.99% for 1 micron.
2. It can be used as dust collector and dust removal system for
various working conditions.
3. Simple structure.
4. Small size and saving floor space.
5. Easy maintenance.
6. Long service life.
7. The unit type combined structure makes the filter area, the
treatment air volume and the external dimensions can be widely and
flexibly selected, and has strong practicability.
Cleaning:
With the extension of the filtration time, the dust
layer on the filter bag is continuously accumulated, and the
resistance of the dust removal device is continuously increased.
When the resistance of the device rises to the set value, the
cleaning device starts to clean. First, a compartment chamber
poppet valve is closed, the filtered airflow is cut off, and then
the electromagnetic pulse valve is opened. The compressed air
expands rapidly in the upper tank body in a very short time, and
flows into the filter bag, causing the filter bag to expand and
deform to generate vibration, and in the reverse airflow. Under the
action of the scouring, the dust adhering to the outer surface of
the filter bag is peeled off and falls into the hopper. After the
cleaning is completed, the electromagnetic pulse valve is closed,
the poppet valve is opened, and the chamber is restored to the
filtered state. The cleaning chambers are sequentially performed,
starting from the first chamber cleaning to the next cleaning,
starting with a cleaning cycle. The dust that has been intercepted
by the filtration and cleaning work falls into the ash hopper, and
is discharged by the ash discharge device of the ash hopper.
Work site:
