Active Member
|
[China]
Address: Xingyang Industrial Park,Zhengzhou,Henan,China
Contact name:Andie Tian
BH Mortar Industrial Co., Ltd. |
|
|
Factory design complete specifications pulse bag dust removal system
Description:
Industrial bag filter dust separator woodworking dust catcher Ash dust catcher air filter systems is a small bag dust collector. When the dust remover is working, dusty gas enters the ash hopper or enters the filter bag room through the open flange, and the filter bag is filtered to enter the purging chamber. After the exhaust of the purified air chamber is exhausted by the fan, the dust accumulates on the outer surface of the filter bag. With the continuous accumulation of dust, the resistance of the dust collector is continuously increased. When the resistance increases to the set upper limit, the dust removal system needs to remove the dust on the filter bag. The dedusting system is controlled by the program, the pulse valve is opened in turn, the compressed air in the air bag is blown by the blow pipe, and the ambient air induced by the Venturi tube several times the primary air enters the filter bag. This is the instant bag bag expansion and With the reverse action of the air flow, dust is shaken off to achieve the purpose of cleaning.
Details:
1. Box: including bag room, clean air chamber, perforated plate, filter bag, filter bag skeleton, maintenance door, and box design pressure resistance is 5000Pa.
2. the air system: including fans, fans with motors.
3. Injection system: including main air pipe, blow pipe, pulse valve and control instrument.
4. The ash discharge part of the intake air has two forms: one is the standard ash bucket type, and the other is the open flange type.
Application:
1) Welding fume, foundry
2) Food, pharmaceutical
3) Shot blasting
4) Tobacco, metal, painting
5) Energy
Maintenance:
| 1. Before starting the dust collector in each class, check the oil level of the centrifugal fan unloader, the oil level of the fan bearing box, and check whether the feet and fastening bolts are loose. Check that the line damper is at the set switch position. Check that the knob position of the pulse controller is appropriate. |
| 2. Start the dust collector before starting the crusher. |
| 3. Restart the shredder. |
| 4. Turn on the pulse controller vacuum cleaner to start working. |
| 5. In the work of the precipitator, each shift will start the unloader 5~10 minutes before parking. A soft cloth tube should be attached to the ash outlet near the belt to allow the dust to flow slowly on the belt to prevent secondary dust. |
| 6. The electric valve pointer is open at 900 and the pointer is closed at 00. |
| 7. The manual valve rotates clockwise to off and counterclockwise to open. |
| 8. The left knob of the pulse controller controls the opening degree of the blow solenoid valve. The left turn is small and the right turn is large. The right knob controls the pulse backflush time. The left turn is short and the right turn is long. Generally, it is adjusted to about one minute (see the watch time). Usually, the positions of the two knobs are set at about 450 right-handed. |
| 9. The maintenance and cleaning of the dust collector is the responsibility of the driver of the crusher. And do a good job of the dust collector operation record. |
Work site:
