Active Member
|
[China]
Address: WEIFANG SHANDONG，CHINA
Contact name:wangbin
RderCorp North Husbandry Machinery |
|
|
Best Evaporative Cooling Pad +Exhaust Cooling Fan = Greenhouse Cooling System
The world's largest manufacturers of COOLING PAD & EXHAUST FAN
Plz >>>www.northhusbandry.cc/ Ventilation Fan,Chicken,farm,livestock,Cooling Pad,poultry Fan,Greenhouse fan,poultry equipment,Exhaust Fan,Ventilation Fan <<<
1.The fan translation has accredited Europe of CE certification.
2.The motor is high efficiency and low wastage of energy.
Model | Blade Diameter/mm | Frequency/Hz | Electric Current/A | Input Power/Kw | Voltage/V | Rotational speed(r/min) | Noise(db) | Air Flow (m³/h) | Size/mm |
NHXL1380 | 1250(50in) | 50 | 1.25 | 1.1 | 380/220 | 44000 | ≤64 | 44000 | 1380*1380*450 |
Blades:The mirror face stainless steel blades are imported from
German,the whole machine goes through balance test.
Blade diameter:1250mm(50" ventilation fan).Blades are formed by
stamping while the angle is suitable,which can make the biggest
airflow as well as the smallest noise and not out of shape nor
rupture during long using term.
Additionally,each set of blades must be tested by balance system
before sold,which will make sure the stable and smoothy work for
the fan.
Hot galvanized sheets.The thickness is 0.8mm and 1.5mm.It increases the intensity,life length and weight of whole machine.It improves the stability of the fan.
The special and advanced centrifugal system assures the opening angle of the shutter so that air flow can be kept on the smooth high level.It is made of superior quality nylon and a litle fiberglass,also it is used rivet,which is made of cuprum so that they will antirust.Column-oriented is made of 304 stanless steel.It can ensure the shutter opens with the angle of 90 degree when the while machine runs on the rails.
Demestic motor,Siemens,we will supply according to customer's choice and suiting for local voltage and frequency.
Installation hole of motor is six angles instead of the roundness,which can steady the motor better.
Two kinds of belf pulley for selection:Aluminum,Cast Iron.
It is used by aluminium magnesium alloy,light weight,high intensity.Flank is one-off injection moulded,with aluminium magnesium alloly,which is ne aerial material,ligh and high-strength with beautiul shape.
The spring is made of high quality 304 stainless steel,it will be antirust and non-deformation during long term-using,which ensure to close the shutters in place.
Being imported from Japan,the Mitsuboshi belt is of top performance and long using terms wihout any maintaining.
Frame, frames are made of galvanized board, thickness 1.0mm,galvanizing layer 180g/square meters.
