Powerful Molybdenum Wire Cut Machine 1160*1650*1850mm Wire Tension System

edm molybdenum wire FH300C New Design

Molybdenum Wire Cut Machine Feature:

1. High performance and low cost controlling system plus.
2. User-friendly interface which make the operation ease and smooth. Keyboard manipulation which made of stainless steel ensure the long life use for the control desk.
3. The flexible machine head design fulfil the needs on taper cutting and vertical cutting with different thickness.
4. U.V axis strategically places on the upper column enhances rigidity and ensure stability under high water pressure during rough cut as well as high precision operation.
5. High precision mold machining such as taper cutting , high tolerance fitting , ultra thin wire and special material cutting.

Molybdenum Wire Cut Machine Introduction

Considering the main problems existing in the old type Fast Speed wire cut machine such as low cutting precision, bad surface finishing and slow cutting speed, while the brass wire cut machine is much more expensive and difficult to learn, we develop the second generation Middle Speed Wire Cutting machine based on the technology from Brass wire cut machine, deeply improves the cutting precision, surface finishing (Ra≤0.8um), cutting speed to make the cutting life and technology almost same as brass wire cut machine. But the machine's purchase cost is much lower than brass wire cut machine, the operator who has a little experience of fast speed wire cut machine can use our machine immediately. Comprehensive efficiency is 2 or 3 time as fast speed wire cut machine.

Molybdenum Wire Cut Machine Standard Configuration:

1) Window XP System with Auto-CAD software control System.
2) PANASONIC converter ( Japan Panasonic )
3) "C" Structure HTK Casting Machine Body ( Japan HTK )
4) Standard DRO and Z axis motorized drive up and down.
5) Hiwin brand linear guide way install on XYZUV 5 axis ( P lever )
6) Hiwin brand ball screw install on XYZUV 5 axis ( C3 lever )
7) Automatic center lubrication system. (Not manual )
8) LED Inside light (Not outside bulb)
9) Automatic double direction wire tension system

Cooperate Suppliers:

Linear guide way and ball screw supplier (HINWIN Taiwan)
Bearing supplier (NSK Japan )
Motor, Driver and Electric accessories supplier ( SIEMENS German)
Electric accessories supplier ( NCC Japan )
Transducer (converter) ( PANASONIC Japan)
Servo driver supplier ( YASKAWA Japan )
Handle Remote supplier (EUCHNER German )
Industrial control system supplier (PHILIPS Europe)

Molybdenum Wire Cut Machine Featurers:

1) Parameter is not required to put in, Artificial Intelligence works out perfect parameter 
immediately after putting in cutting thickness and wire diameter, Different accuracy based on different workers with different experience will be solved.  
2) Roughness: Ra ≤0.8um

Factory Situation:

1). More than 1500 Sets Wire Cut Machine can be sold out in Chinese market each year.
2). Over 8000 sets EDM machines installed in China or other countries.
3). 8 steps checking for each machine by more than 25 QCS.
4). 20 years experience on EDM Machines (From 1997) , 300 employees.
5). 20 research personnel for developing new models or accessories.

Molybdenum Wire Cut Machine Parameters