Automatic Molybdenum Wire Cut Machine 1540*1920*2020mm 0.01mm Machine Accuracy

molybdenum wire cut machine FR500G New Design

Features of the cnc wire cut edm machine:

• Special supporting design of the machine with high strength and heavy loading capacity.
• The machine uses the long span and long guiding rail structure lined with steel which helps the stability.
• The feeding wire part of the machine uses the driving system of gearwheel with lower noise and longer life.
• The maximum diameter of molybdenum wire is <= 0.20mm. The wire tube uses the chroming material with good wear resistance.
• The cutting accuracy of all direction is less than 0.01mm. Use high precision ball screw, which has high transmission efficiency,good positioning accuracy, long life and well synchronization performance. Use the high precision guide rail with high strength, heavy loading capacity and low resistance. High stability of the machine. The failure rate is almost 0.
• All the machine applies the high precision guide wheel appliance to enhance the accuracy of cutting.

Factory Situation:

1). More than 1500 Sets Wire Cut Machine can be sold out in Chinese market each year.
2). Over 8000 sets EDM machines installed in China or other countries.
3). 8 steps checking for each machine by more than 25 QCS.

Molybdenum Wire Cut Machine Standard Configuration:

1) Window XP System with Auto-CAD software control System.
2) PANASONIC converter ( Japan Panasonic )
3) "C" Structure HTK Casting Machine Body ( Japan HTK )
4) Standard DRO and Z axis motorized drive up and down.
5) Hiwin brand linear guide way install on XYZUV 5 axis ( P lever )
6) Hiwin brand ball screw install on XYZUV 5 axis ( C3 lever )
7) Automatic center lubrication system. (Not manual )
8) LED Inside light (Not outside bulb)
9) Automatic double direction wire tension system

Cooperate Suppliers:

Linear guide way and ball screw supplier (HINWIN Taiwan)
Bearing supplier (NSK Japan )
Motor, Driver and Electric accessories supplier ( SIEMENS German)
Electric accessories supplier ( NCC Japan )
Transducer (converter) ( PANASONIC Japan)
Servo driver supplier ( YASKAWA Japan )
Handle Remote supplier (EUCHNER German )
Industrial control system supplier (PHILIPS Europe)

Molybdenum Wire Cut Machine Featurers:

1) Parameter is not required to put in, Artificial Intelligence works out perfect parameter 
immediately after putting in cutting thickness and wire diameter, Different accuracy based on different workers with different experience will be solved.  
2) Roughness: Ra ≤0.8um
 

Molybdenum Wire Cut Machine Parameters

Product Introduction

Considering the main problems existing in the old type Fast Speed wire cut machine such as low cutting precision, bad surface finishing and slow cutting speed, while the brass wire cut machine is much more expensive and difficult to learn, we develop the second generation Middle Speed Wire Cutting machine based on the technology from Brass wire cut machine, deeply improves the cutting precision, surface finishing (Ra≤0.8um), cutting speed to make the cutting life and technology almost same as brass wire cut machine. But the machine's purchase cost is much lower than brass wire cut machine, the operator who has a little experience of fast speed wire cut machine can use our machine immediately. Comprehensive efficiency is 2 or 3 time as fast speed wire cut machine.