Ink Printing Die Cutter Slotter Machine With Touch Screen Easy View

Ink Printing Die Cutter Slotter Machine

Model: 1200x2800

1. The machine adopted touch screen at each unit of machine that could be adjusted automatically . It will cut lots of time while operating. Each unit is inter-connected by PLC, and date setting in touch screen is able to order the specific action. Easy-view and conveniently adjustable is available.

2. 250 sheets per minute when runs at the top speed. It could be efficient to produce one hundred thousand pieces of carton of daily productivity.

3. It can connect with Auto Pre-Feeder Equipment or Auto Strapping Machine, 3-5 workers for whole production line is available.

4. Adopts excellent materials and parts. All the rollers are chrome plated and harden treated; all the gears are ground by Germany High-precise gear grinding machine, the precision grade up to 6.5; all the bearings adopts JAPAN NSK/NTN/IKO.

5. All the motors & electric parts adopts international brands, such as HL, CPG, EMERSON, SCHNEIDER, OMRON and etc...

printers

The printing roller.

The printing roller is steel material, after balance correction.

The surface of the printing roller is grinded, polished and hard chromium plating.

The-printing-plate-reel structure is adopted. The pedal switch control the printing roller run clockwise and anticlockwise,makes change printing plate easy.

A complete slot in the printing roller for hung the printing plate,the size of the slot is 9mm×3mm.

The down press printing roller.

The down press printing roller adopt steel tube without gaps, after balance correction.

The surface of the down press printing roller is grinded, polished and hard chromium plating.

The distance between the printing roller and down press printing roller is adjusted by hands,while the dial show the adjust date,the adjusting scope is 2-12mm.The printing and down press printing roller adopt the crosshead connect with the drive gears,when adjust the distance between the two rollers,the distance between the two driver gears of the two rollers will not changed.

The anilox roller:

The material of the steel anilox roller is chrome anilox 180,200, 200 LPI.

The anilox roller surface adopts advanced chromium plating, smoothness and hard wearing.

The automatic Pneumatic control Up-down device of the anilox roller is synchronous with the cardboard feeding system.(when the cardboard is fed, the anilox roller is to go down and touch the printing plate when cardboard feeding is to stop and the anilox roller will go up and separated from the printing plate.)The anilox roller also could be pneumatically controlled by manual button for up and down.

The rubber roller.

The rubber roller is steel roller covered with hardwearing rubber and this roller is especially grinded, after balance correction .the surface’s diameter in middle part of rubber roller is bigger than two sides so as to obtain good effect of ink transmission.

The Up and down cardboard feeding roller.

The diameter of the up cardboard feeding roller is 94mm,with four cardboard feed wheel . The up cardboard feeding roller is steel tube without gaps, been grinded, polished and hard chromium plating, and after balance correction.

The down cardboard feeding roller is steel tube without gaps,been grinded, polished and hard chromium plating,and after balance correction.

The distance between the up and down cardboard feeding roller is adjusted by hands,while the dial show the adjust date,the adjusting scope is 2-12mm.The up and down cardboard feeding roller adopt the crosshead connect with the drive gears,when adjust the distance between the two rollers,the distance between the two driver gears of the two rollers will not changed,it can make the machine have high printing precision,low noise,and the gears have longer useful time.

The adjustive device of the printing roller.

Adopt satellite gear structure for adjust the clockwise and the anticlockwise phase of the printing roller.

The clockwise and the anticlockwise phase of the printing roller is adjusted by the PLC and electricity,phase motor control by invoter,delta brand.360° could be adjusted while the machine running or stop.

The horizontal move of the printing roller is adjusted by PLC and electricity, the adjusting distance is 20mm.

The “Automatic zero-returning” and “printing plate cleaned memory” function can make the machine adjust the printing plate to the right printing location quickly.(The “Automatic zero-returning” function is for clear the print plate,when you use this function,the printing roller will automatic run to the best location which for wash the print plate, after finish washing, “printing plate cleaned memory” can make the print roller automatic return to the location before wash the printing plate,it will save time for adjust the print block again after clear printing plate)

Inking system.

Inking system adopts pneumatic diaphragm pump inking with the ink cup to prevent the ink splashing. Steady inking and easy to maintain.

Have ink dust gauze, make the ink more clear,improve the printing effect.

When the machine stop,the anilox roller and rubber roller could running independently for transmission ink and prevent the ink dry out.

With ink sensor,while ink level lower or empty, the unit will warning for add ink, save wast paper.

Fix system of the printing unit.

Self-locking system is used in the distance adjustment of the feeding roller, down printing press roller, anilox roller and rubber roller.

There is a device for fix the “printing clockwise and anticlockwise phase”, a cylinder is used,when the unit is opened and when the phase of the printing roller is adjusted, the cylinder will brake all the units rolling running and keep the original location of the gears.