Guangzhou HS Machinery Co., Ltd. |
Verified Suppliers
|
|
Model: 2800x4200
Max.Sheet size | 2800x4200mm |
Max. speed: | 80pcs/min. |
Economical speed: | 60pcs/min. |
Max.working size: | 2800 x 4200mm |
Min.sheet size: | 500mmX600mm |
Max.printing area: | 2800 x 4200mm |
Wall thickness: | HT250, 80mm |
Printing cylinder out diameter: | 890mm(with cliché: 900mm) |
Cliché thickness: | 7mm |
Slot width x Slot depth: | 7mmX300mm |
Max. paper thickness | 10mm |
Slotting accuracy | ±1.5mm |
Printing registration(medium speed): | ±0.5mm |
Mesh mode: | 180LPI |
Dimension of the whole machine | 13000(L)x7000(W)x3300(H)mm |
Total power(KW) | 50KW |
Total weight(Ton) | 50TONS |
1.Machine clutch
1.Electric controlling the clutch of the machine platform and
installed alarms in order to assure the safe of the operator while
the bell rings constantly during marching.
2.Drive shaft is equipped the clutch in order to avoid the wrong
operation damaging the machine(if the machine is not locked ,the
main motor could not revolve)
3.Pneumatic type interlocking device.
4.Main motor startup protection device.
2.Lead edge feeding paper system(domestic)
1.Lead edge feeding paper system can decrease the clogging when
feeding paper.
2.Wind absorbing auxiliary feeding paper , so the bending paper can
feed in smoothly, the quantity of the wind could adjust according
to the paperboard , it can ensure the
3.vacuum adsorptive power , so the feeding paper is much precise.
4.Front and back baffle adopt manual adjustment , the left and
right baffle adopts electric adjustment.
5.The feeding paper wheel adopts Polyurethane , strong friction and
long using life.
6.The machine is suitable three layer and five layer corrugated
paperboard ,including the E corrugated paperboard.
7.Feeding paper counter , set and display the production.
3.Absorb dust device
It is equipped the clear dust device (upper wind absorbing , clear
dust brush) , it can clear the dust and impurity on the paperboard
and increase the printing quality.
4.Feeding paper roller
1.Seamless steel tube is packed with the wear resisting rubber and
has gone through the dynamic revise
2.The under feeding paper is chromed
3.The gap between feeding paper rollers adopt manual adjustment ,
the adjusting range is 0-11mm
4.The operating control switch
5.The control panel adopts touching screen , it can control feeding
paper Unit , printing Unit , die cutting Unit and it is easy to
operate.
5. Automatically zero device.
Feeding paper Unit , printing Unit , die cutting Unit adopt
electric zero device.
Common carton box use the automatically zero device , after
printing two piece , it can adjust to the correct position and
decrease the wasting paper.