Home Companies Guangzhou HS Machinery Co., Ltd.

Automatic Corrugated Box Packaging Machine / Carton Box Punching Machine

Guangzhou HS Machinery Co., Ltd.

Contact Us

[China] country

Trade Verify

Address: Xiaowu 1st Industrial Area, Xiaowu Village, Dongchong Town, Nansha, Guangzhou, China

Contact name:Johnson

Inquir Now

Guangzhou HS Machinery Co., Ltd.

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

Automatic Corrugated Box Packaging Machine / Carton Box Punching Machine

Country/Region china
City & Province guangzhou
InquireNow

Product Details

Carton Die Cutting Machine Corrugated Box Packaging Machine

 Model:2200x4000 Jumbo

 

 

1. The drying system can use different color groups to dry the printed pattern with the method of infrared single-group drying.

2. The vacuum transmission box uses the method of segmented feeding. Meanwhile, the bottom printing shafts and the suction wheels are transmitted by ceramic wheels. The bottom printing shaft is the same structure as the suction wheel, but this wheel is an axis. Segmented feeding: a bellows is divided into five columns. If it is small cardboard, probably three columns of air door are opened, the top side of the 2 doors will be closed, so that the wind will be concentrated. If it is large cardboard, all air doors will be opened.

3. The slight pressure regulating vacuum box and the ink printing pressure are adjusted by using European special high-rate     piston type to avoid mackle problems. Ink printing pressure: printing pressure

4. The corrugated box making machine can automatically washing ink with fast speed in a cycle(3 minutes) and it has ink lacking alarming device with the technology of ink lacking alarming.Quick washing ink is convenient for cleaning the ink on the rollers after you using the machine.

5. The corrugated box making machine has ink leakage alarm system to avoid ink waste.

                                                         

Standard equipments:

A. Independent Lead Edge Feeder;

B. printers 

C. motorized slotter

D. RotaryDie Cutter with auto trimming device;

E.  Auto Stacker 

Model1600x3600 jumbo

1800x4200

jumbo

1800x3600jumbo2200*3600 jumbo2200*4000 jumbo2200*4600 jumbo2600*3600 jumbo
Machine Speed(m/min)150

 

150

1501201008080
Machine Max.speed (pcs/min)110

 

100

 

100

100806060
Machine Max.feeder Size(mm)1500x3600

 

1700x4200

 

188x3600

2000x36002100x40002100x46002500x3600
Machine min.feeder Size(mm)450x760450x750450x760550x900550x900550x900650x900
Machine Max. printer size (mm)1500x35001600x4000

 

1600x33400

2000x34002000x38002000x42002400x3400
thick of printer Plate(mm)7.27.27.27.27.27.27.2
Max. slotter Dep (mm)560750750750750750850
Max. Thickness of Sheet(mm)15151515151515

Machine size (LxWxH)

 

19852x6670x270015000x5200x250014000x4500x230020173x6670x280020173x7070x280020173x7670x280020495x6670x3000

 

 

  

 

 

 

 Independent Lead Edge Feeder

ItemDescriptions

 

1. Lead Edge Feeding system

1. Vacuum transfer lead edge feeder.

2. Back buffle and side buffle are all motorized adjustment.

3. Feeder sliding block is of aluminum structure to guarantee a more stable working with less vibration.

4. Sheet counting in touch screen.

5. Skip feeding for bigger sheet.

7. Pneumatic lift device with end chain-lock switch for convenient operation.

2. Machine open/cloe

1. Button auto control for machine open/close with alarm device to safeguard operators.

2. Pneumatic locking system, whole machine locked on fixed track by feeder main pneumatic cylinder.

3. Feeding roll1. Endurable rubber-coated feeding roll to add use life.
4. Zero return device1. Computer adopts zero return device with memory function to guarantee the same adjustment standard, auto adjustment of correct position to reduce the waste of boards.
 

Features of printing units

 

ItemFeatures

 

 

 

 

 

 

1. Printing cylinder

1. Printing phase adjustment adopts satellite gear wheel structure, PLC control, digital display, 360 degree circumferential adjustment, stable start, correction positioning.

2. Grinded printing cylinder with harm chrome, with cross line and center line, for convenient cliché fixation and sticking, correct positioning and quick cliché registration.

3. Balance treatment, stable running, for high speed running.

4. Quick and convenient fixing system for the printing cliché.

5. Quick cliché change system to speed up the order renewal time.

6. Zero position device for printing cylinder for quick positioning of cliché change and correction, for repeated carton specification change. Foot stepping device for cliché fixation and dismantling. Phase micro adjustment.

7. Printing cylinder left/right movement distance: 10mm.

8. Diameter of printing cylinder: ø524mm,ø304mm(with cliché thickness)

2. Impression cylinder(ø156mm)

1. Seamless steel pipe for precise processing, balance treatment for stable running, grinding and hard chromed.

2. Impression cylinder gap adopts adjustable offset ring, with close structure, precise positioning, adjustment scope: 0-12mm.

3. Feeding roll

1. Up feeding roll: grinded and hard chromed.

2. Lower feeding roll: grinded, sand-frosted and hard-chromed.

3. Lower feeding shaft gap adjustment adopts offset ring with close structure, correction positioning, adjustable at 0-12mm.

4. Rubber roll

 

 

Seamless steel pipe for precise processing, balance treatment for stable running, grinding and hard chromed.

2. Steel pipe rubber-coated durable for longlife.

3. Super clutch and auto empty run device against ink dry.

4. Midheight grinding for high LPI big space printing.

5. Rubber roll open/close adopts worm gearbox manual adjustment, with worm gearbox for gap adjustment with scale indication.

5. Anilox roll

1. Seamless steel pipe for precise processing, balance treatment for stable running, grinding and hard chromed.

2. Longlife running, anti-grinding and erosion, ideal ink transferring and controlling performance.

3. Pneumatic anilox auto elevation device and empty run device.

4. Speed difference between anilox roll and rubber roll for ink doctoring effect to increase printing quality.

6. Inking system

1. Single-way pneumatic membrane auto circulating pump.

2. Ink filtering net to filter the dirt for nice printing result.

3. Encased ink chamber.

7. Phase adjustment structure

1. Satelite gear wheel design.

2. Motorized circumferential adjustment, digital display, 360 degree run or stop adjustment.

3. PLC control, quick reach, convenient for cliché adjustment.

4. Manual gap Pressure adjustment for all units.

8. Printing cylinder fixed device

1. Electromagnetic braking structure.

2. When machine unit separates or adjust phase, braking system to control the running of machine units to keep original gear positioning point.

9. Printing cylinder fixed device

1. Electromagnetic braking structure.

2. When machine unit separates or adjust phase, braking system to control the running of machine units to keep original gear positioning point.

  

 

Features of slotting unit

 

 

ItemFeatures
1. Slotting phase adjustment

1.High precision inverter to adjust the speed, 360 degree adjustment, quick time.

2.Phase zero positioning device to guarantee slotting position sameness.

2. Creasing wheel

1.Manual/motorized adjustment of creasing wheel and slotting knife head position through precise screw pole.

2.Creasing wheel down shaft, slotting knife down shaft adopt offset ring, close structure for precise positioning.

3. Slitting and slotting knife head

1.Blade thickness:7mm. Imported high quality alloyed moon-shaped saw slotting blades, high hardness, high endurability, high grindability.

2.Grinded and hard-chromed slotting shaft for stable running.

3.Manual adjustment of slotting knife head, creasing wheel and slitting knife head.

4.Auto detection device of slotting shaft circumferential position, auto record of the position and guarantee the position auto return.

5. Pre-creaser fixed before slotter.

6. Front knife and back knife seated on one shaft.

 

Features for Rotary Die Cutting Unit

ItemFeatures

 

 

1. Die cutting mould cylinder( Down cylinder)

1.Die cutting cylinder is made by high quality steel, fine grinding, hard chromed.

2. Balance treatment to increase stable running.

3.Die cutting mould fixation screws M10, hole distance at 100mm at transversal direction and 18 equal units at circumferential direction.

4.Die cutting wooden mould thickness 13-15mm(five ply), 16-18mm(three ply).

2. Rubber mat cylinder(Down cylinder)

1.Mat cylinder uses high quality steel, grinding, hard chromed.

2.Balance treatment for stable running.

3.Rubber mat thickness 8mm, width 250mm.

4.Rubber mat cylinder mechanical rotary direction change 40mm distance movement structure, movement speed same as the machine running speed.

5.Manual adjustment of die cutting mould gap, adjustment range: 0-16mm.

3. Phase adjustment device

1.Satellite gearwheel structure

2.PLC and encoder control of die cutting phase adjustment for start and stop adjustment.

  

 

 

 

  

 

 

Hot Products

Carton Die Cutting Machine Jumbo Automatic Carton Printer Inline Folder Gluer Model:jumbo1600x3600 1...
Carton Die Cutting Machine Jumbo Size Printing Slotting Machine Model: 2200x3600 jumbo size Machine ...
Carton Die Cutting Machine Converting Carton Box Machine Model:2200x3600 jumbo Product composition ...
Carton Die Cutting Machine Ink Printing Slotting Die Cutting Machine Model: 1800x2800 Feature: The ...
Carton Die Cutting Machine Corrugated Box Packaging Machine Model:2200x4000 Jumbo 1. The drying ...
Carton Die Cutting Machine Flexo Printing Slotting Equipment Model:1600x3200 Main configuration: 1. ...