Active Member
|
[China]
Address: Yideli Industrial Park, Jinghe 3rd Road, Jinghe, Dongxihu, Wuhan,China
Contact name:Cindy Chen
Hubei Yideli Light Industry Technology Co., Ltd. |
|
|
Stainless Steel Material Of 4 Vessel Brewhouse For Various Beer Brewery
Product Description
Large middle Micro hotel/bar/pub craft beer brewing equipment with standard europe quality,CE certificate
Following are output for reference .
| Daily Output | 100L | 200L | 300L | 500L | 600L | 800L | 1000L | 2000L | 3000L | 5000L |
| Unit Type | HL100 | HL200 | HL300 | HL500 | HL600 | HL800 | HL1000 | HL2000 | HL3000 | HL5000 |
| Floor Space | 15m² | 20m² | 25m² | 45m² | 55 m² | 70m² | 80m² | 120m² | 150m² | 250m² |
| Power | 8KW | 12KW | 20KW | 35KW | 35/15KW | 35/15KW | 35/15KW | 65/15KW | 65/15KW | 65/15KW |
| Electricity | 3P 380V(220V, 110V, 415V...) 50(60)HZ; 1P 220V(120V,110V,240V...) 50(60)HZ | |||||||||
Brewhouse system
Function: It is used for finish 4 processes: mashing, lautering, boiling, and whirlpool.
Component: Mash tun/lauter tank, boiling tank/Whirlpool tank, motor, pump,manhole, hops back, It is the second part of best seller beer brewing equipment.
Capacity:Above 15bbl brewhouse (Mash tun,,Lauter tank, Boiling, Whirlpool tank).
Heating method: Steam heating with electric boiler, heat evenly and fast, keep beer's flavor.
Control method: PLC controller cabinet show and control motors, and pumps.
Material: Stainless steel 304.
1. Mash tun
Mash tun is a vessel used in the mashing process to convert the starches in crushed grains into sugars for fermentation. They are insulated to maintain a constant temperature. And the mash tun can be single-function or can also have a false bottom and spigot so that the sparging process can be done in the same vessel. Steam jacket design will allow whole systems are designed to do both decoction mashing and infusion mashing. The mashing tun/kettle is made out of stainless steel or copper.
2. Lauter tun
The lauter tun is used for filtering and clarifying the sugar
liquid (called wort) out of the heated water-malt mixture (called
mash) that comes from the mashing tun.
The lauter tun typically has the same capacity as the cooking tun
and can also be made out of stainless steel or copper cladding. It
has a design with a false bottom in stainless steel v-wire and a
raking gear that has the function of an agitator, a rake and a
spent gain remover. This is a very unique and helpful tool because
after filtering the spent grains will be automatically removed from
the lauter tun, saving a lot of time and energy of the brewmaster.
Furthermore the lauter tun can be equipped with additional
accessories such as sight glasses, CIP jets for simplifying the
lautering.
3. Boiling Kettle
After lautering, the beer wort is boiled with hops (and other flavourings if used) in a large tank known as a brew kettle. The boiling process is where chemical and technical reactions take place, including sterilization of the wort to remove unwanted bacteria, releasing of hop flavours, bitterness and aroma compounds through isomerization, stopping of enzymatic processes, precipitation of proteins, and concentration of the wort.
4. Whirlpool Tun
At the end of the boil, the hopped wort settles to clarify in a vessel called a "whirlpool" where there is a tangential inlet of wort. Thus, a vortex is formed when the wort is infused along the arc inside surface, so that the more solid particles in the wort are separated out. Whirlpool can happen in the kettle because there is no obstacle inside the kettle.
