Active Member
|
[China]
Address: South Xinyuan Road, Juqiao Economic Development Zone,Luyuan Town, Zhangjiagang City, Jiangsu Province, China
Contact name:Mike
Zhangjiagang Baisu Machinery Manufacture Co., Ltd. |
|
|
1L Plastic Joyshaker PE Bottle Blow Molding Machine SRB70D-3 220V 380V 415V 440V , 750ml Sport Water Bottle HDPE Bottle Blow Molding Machine , HDPE joyshaker Bottles Making Machine
QUICK VIEWS
1. SRB70D-3 specially used for PE & PP bottles, jerrycan, kettles, containers and jars, output >800 BPH.
2. The bottle neck could be processed with on-line rotary cutting device or external neck rotary cutting machine.
3. Average power consumption is 32.5KW, need 2 workers for material process and finished bottle packaging.
|
TECHNICAL PARAMETERS
| Machine Model | Double Station Extruder Blowing Machine |
| Max Product Volume | 1 L |
| Machine Weight | 5.5 Tons |
| Machine Size | 3.8 x 2.2 x 2.5 m |
| Screw Diameter | 70 mm |
| Plasticizing Capacity | 90 KG |
| Clamping Force | 68 KN |
| Platen Size | 320 x 390 mm |
| Platen Opening Stroke | 150~500 mm |
| Max Mould Size | 360 x 360 mm |
| Triple Head Central Distance | 110 mm |
| Max Product Diameter or Width | 85 mm |
| Material Cutting Method | Hot Cutting |
| Max Die Diameter | 100 mm |
| Total Power | 48.5 KW |
| Average Energy Consumption | 32.5 KW |
PRODUCTION FLOW
The working flow of 1L double station triple head plastic bottles manufacturing machine production flow is basically like this. The PLC in the electronic control case sends the instruction, the hydraulic system receives the instruction, the fuel tank and the motor start to operate, drives the screw to run, and extrudes the embryo through the die head. The opening and closing mold begins to be closed, the needle is blown, cooled, and plastic products are formed.
MACHINE FEATURES
► Control Unit: WISETECH total machine programmable controller controller and ture colorful touch panel. English parameter process setting, state monitoring and products counting are convenient and intuitionistic. PLC automatic temperature control model.
► Hydraulic Unit: It adopts international famous Japan YUKEN brand
hydraulic valve and seal, proportional control. And has features of
high stationarity and reliability, accurate operation, long
longevity, quick response and so on.
► Extrusion Unit: Hard gear surface decelerator; famous Delta
inverter adopts Italian technology; Screw speed regulation adopts
variable-frequency speed regulation control system. It has the
features of stable rotate speed, powerful power, energy-saving and
so on. Mixing screw has wide applicability to raw materials and the
plasticization quality is even better. Energy-saving machine barrel
and A-alloy heaters are adopted for heating
► Die Head Unit: With single cylinder material-center-in
accumulator head, is smooth and dependable. This die head adopts
German technology and is made by special imported steel.
► Clamping Unit: Adopts fixed mould open-closing system,fast and
balanced.
► Blow Fitting Unit: Down blowing fitting is equipped.
► Lifter Unit: Four turbine reducer liter, lifting balance, quick,
stable.
► Electrical Components: All of the electrical components are made
in Japan and Taiwan.
PRODUCTION ARRANGEMENT
1. Machine Foundation Size: 3.5 x 2 m
2. Production Area: 7 x 5 m
3. Minimum Workshop Height: 3.0 m
4. Air Supply Requirement: 1.0m3/min, 0.6Mpa
5. Water Supply Requirement: 8 Tons
6. Machine Power Consumption: 32.5 KW
7. Production Line Power Consumption: 45 KW
8. Whole Line Electricity Arrangement: 250 Amps
9. Minimum Workers Number: 2 Workers
|
