Active Member
|
[China]
Address: South Xinyuan Road, Juqiao Economic Development Zone,Luyuan Town, Zhangjiagang City, Jiangsu Province, China
Contact name:Mike
Zhangjiagang Baisu Machinery Manufacture Co., Ltd. |
|
|
PE/PP Plastic 5 Liter Jerry Can Extrusion Blow Moulding Machine SRB70D-1, 5L Jerry Cans Bottle Blow Molding Machine, 5L Plastic Container Making Machine
QUICK VIEWS
1. SRB70D-1 specially used for PE & PP bottles, jerrycan, kettles, containers and jars from 1L to 5L.
2. Machine total control system with convenient operation page design suitable for remote technical support.
3. Adopt pressure / flow double proportion control for hydraulic system, insure platen moving speed & smoothness.
4. The output for 150 grams hdpe square bottle is 220 Pcs/hour, the daily capacity is about 5300 bottles.
|
TECHNICAL PARAMETERS
| Machine Model | Double Station Extruder Blowing Machine |
| Max Product Volume | 5 L |
| Machine Weight | 5.5 Tons |
| Machine Size | 3.8 x 2.2 x 2.5 m |
| Screw Diameter | 70 mm |
| Plasticizing Capacity | 90 KG |
| Clamping Force | 68 KN |
| Platen Size | 320 x 390 mm |
| Platen Opening Stroke | 150~500 mm |
| Max Mould Size | 360 x 360 mm |
| Head type | Continuous extrusion single head |
| Max die diameter | 180 mm |
| Material Cutting Method | Hot Cutting |
| Max Die Diameter | 100 mm |
| Total Power | 48.5 KW |
| Average Energy Consumption | 31.5 KW |
Click Above Picture to See SRB70D-1PT Commissioning for 5L Jerry Cans
PRODUCTION ARRANGEMENT
1. Machine Foundation Size: 3.5 x 2 m
2. Production Area: 7 x 5 m
3. Minimum Workshop Height: 3.0 m
4. Air Supply Requirement: 1.0m3/min, 0.6Mpa
5. Water Supply Requirement: 8 Tons
6. Machine Power Consumption: 31.5 KW
7. Production Line Power Consumption: 45 KW
8. Whole Line Electricity Arrangement: 250 Amps
9. Minimum Workers Number: 2 Workers
|
MACHINE FEATURES
1. Control Unit: WISETECH total machine programmable controller controller and ture colorful touch panel. English parameter process setting, state monitoring and products counting are convenient and intuitionistic. PLC automatic temperature control model.
2. Hydraulic Unit: It adopts international famous Japan YUKEN brand
hydraulic valve and seal, proportional control. And has features of
high stationarity and reliability, accurate operation, long
longevity, quick response and so on.
3. Extrusion Unit: Hard gear surface decelerator; famous Delta
inverter adopts Italian technology; Screw speed regulation adopts
variable-frequency speed regulation control system. It has the
features of stable rotate speed, powerful power, energy-saving and
so on. Mixing screw has wide applicability to raw materials and the
plasticization quality is even better. Energy-saving machine barrel
and A-alloy heaters are adopted for heating
4. Die Head Unit: With single cylinder material-center-in
accumulator head, is smooth and dependable. This die head adopts
German technology and is made by special imported steel.
5. Clamping Unit: Adopts fixed mould open-closing system,fast and
balanced.
