|
[China]
Trade Verify
Address: No.2 Building 13, No. 6 Fengxi Road,Caijiagang Town, Beibei District,Chongqing,China
Contact name:Elva Zhang
Allwin Machine & Equipment Co.,Ltd |
|
Verified Suppliers
|
|
|
50L/60L Dynamic Discharge Horizontal Disc Sand Mill In Wet Grinding Processing In High Viscosity Slurry
Dynamic discharging sand mills are commonly used in high viscosity
slurry, which is often not easy to discharge with static manner. as
well as commonly use in thermotropic slurry. we have many
successful experience in recalling to redesign the inner dispersing
and discharging system.
The main feactures of dynamic discharg sand mill:
1.more smoothly discharging even if its high viscosity slurry or thermotropic slurry
2. dynamic discharge from side of mechanical seal, lower the pressure of mechanical seal side, helps the meachinical seal less vounlerable to damage, the worklife of mechanical seal is longer and more stable
3. not suitable for finished size which required to reach less than 20um
4. higher production efficiency with lower energy cost and labor cost.
The Technical Data
| No | main parameters | HZ50/60 | Note |
| 1 | Explosion-proof motor kW | 37/45kW ( Ex) | Non ex-proof is optional |
| 2 | Effective volume of grinding chamber (L) | 50/60 | |
| 3 | Water pressure (MPa) | 0.3 | |
| 4 | Cooling water consumption (L/min) | 2.5 -3m3/h | Advise offer the Cooling water less 10°C |
| 5 | Dimensions:L*W*H (mm) | 1940*1040*2000 | |
| 6 | Weight (kg) | 1700---1800 |
The Configuration instructions
| No | Main parts | HZ series Explosion-proof | Notes |
| 1 | Outter chamber | 304 stainless steel | |
| 2 | Inner chamber | Silicon Carbide Ceramics, wearable steel, stainless steel | |
| 3 | Dispersing shaft | 40Cr with hard chromium plating | |
| 4 | Dispersing disk | wear resistant steel, ceramics, or others | |
| 5 | Feeding and discharging end covers on the cylinder | 304 stainless steel | |
| 6 | Turbine centrifugal separator and pegs | 304 stainless steel and YG6 pges | |
| 7 | dynamic discharge screen ring | Wire Wound screen ring with 304.Gaps: 0.5mm. | calculate according to your viscosity or grinding medium |
| 8 | Mechanical seal | Intelligent double mechanical seal with mandatory lubricating-cooling system | |
| 9 | Feeding pump | 1” ARO diaphragm pump; | |
10 | Appliance configuration | Explosion-proof machine. Explosion-proof parts: operation column,electrical appliance boxes;electric contact pressure gauge, temperature,solenoid valves. | |
| 11 | Fasteners and connecting parts | Stainless steel clamp-type connecting parts | Quick and convenient |
The package and shipping: Be covered with anti-abrasion film and then packed in wooden boxes, then seashipping by FCLor LCL.
Related products
disk type static discharge sand mill pin type static discharge sand mill
high speed disperser zirconia bead
Note:
1.We will recommend the suitable bead mills according to your
information and demand, such as industry, fineness, temperature,
viscosity,production capacity etcs.
2. The materials of inner chamber and dispersing disks can be
chosed according to your different grinding materials and
industries.
3. The control system will be matching of different demand, such as
PLC or traditional Button type.
If need more detailed information and Price, please don't hesitate contact us, Also Warmly welcome to visit us.
