|
[China]
Trade Verify
Address: No.2 Building 13, No. 6 Fengxi Road,Caijiagang Town, Beibei District,Chongqing,China
Contact name:Elva Zhang
Allwin Machine & Equipment Co.,Ltd |
|
Verified Suppliers
|
|
|
37kw 20 Liter Wet Horizontal Sand Nano Grinding Mill with Ceramics
Material
These ceramics nano grinding mills are peg type ,which
is better than normal mills because the silicon carbide ceramics
has greater heat rejection performance, and wear-resisting
property, The grinding efficiency is higher 15-30% than
traditional mill machines; the combined disperser can rapidly
increase dispersing efficiency.
The main feactures of Horizontal sand mill:
1.greater heat rejection performance and wear-resisting property of silicon carbide ceramics
2. better temperature control and longer work life
3. fineness can reach to less than 5um, much successfully experience to reach to 400-500 nanometers
4. higher production efficiency with lower energy cost and labor cost.
The Technical Data of Horizontal sand mill
| No | main parameters | AS20 | Note |
| 1 | Explosion-proof motor kW | 37kW ( Ex) | |
| 2 | Effective volume of grinding chamber (L) | 20 | |
| 3 | Water pressure (MPa) | 0.3 | |
| 4 | Cooling water consumption (L/min) | 2.5 -3m3/h | Advise offer the Cooling water less 10°C |
| 5 | Dimensions:L*W*H (mm) | 1940*900*1940 | |
| 6 | Weight (kg) | 1800 |
The Configuration instructions
| No | Main parts | AS20 Explosion-proof | Notes |
| 1 | Outter chamber | 304 stainless steel | |
| 2 | Inner chamber | Silicon Carbide Ceramics | |
| 3 | Dispersing shaft | 40Cr with hard chromium plating | |
| 4 | Dispersing disk | wear resistant steel, ceramics, or others | |
| 5 | Feeding and discharging end covers on the cylinder | 304 stainless steel | |
| 6 | Turbine centrifugal separator and pegs | 304 stainless steel and YG6 pges | |
| 7 | Static discharge screen ring | Wire Wound screen ring with 304.Gaps: 0.5mm. | calculate according to your viscosity or grinding medium |
| 8 | Mechanical seal | Intelligent double mechanical seal with mandatory lubricating-cooling system | |
| 9 | Feeding pump | 1” ARO diaphragm pump; | |
10 | Appliance configuration | Explosion-proof machine. Explosion-proof parts: operation column,electrical appliance boxes;electric contact pressure gauge, temperature,solenoid valves. | |
| 11 | Fasteners and connecting parts | Stainless steel clamp-type connecting parts | Quick and convenient |
The Application filed:
LFP Lithium battery industry;
Skin care industry;
Cosmetics industriy;
Pharmaceutical industry
MLCC LTCC Injet ink
The package and shipping: Be covered with anti-abrasion film and then packed in wooden boxes, then seashipping by FCLor LCL.
If need more detailed information and Price, please don't hesitate contact us, Also Warmly welcome to visit us.
