|
[China]
Trade Verify
Address: 3F, Bldg 6,Hanhai Da Tianliao Technology Park, Yutang Subdistrict, Guangming, Shenzhen, China
Contact name:Jessie
Shenzhen TICO Technology Co.,Ltd. |
|
Verified Suppliers
|
|
|
5V6A 8 Channels Battery Testing Equipment for Lab R&D
Product Introduction
STC-4008-5V6A-S1 is a three range output current tester, 0.5mA ~ 0.1A, 0.1A ~ 3A, 3A ~6A. The accuracy for current and voltage on these channels is ±0.05% FS. It has 8 channels, each channel is working independently. The flexibility of the STC-4008-5V6A allows it to be used for a wide range of applications, such as materials research, quality control in manufacturing, research & development, battery and cell testing, Super-capacitor testing, etc.
Feature
● Multi ranges.
● Wide application.
● High accuracy , ±0.05% FS.
● Fast response time.
● Each channel is independent.
Technical Parameter
| Brand name | TICO | |
| Input Power | AC 220V ±10% / 50Hz | |
| Resolution | AD: 16bit; DA: 16bit | |
| Input Resistance | ≥1GΩ | |
| Input Power | 425W | |
| Channel Features | Constant Current Source and Constant Voltage Source with Independent pairs of Closed-loop Structure | |
| Channel Control Mode | Independent Control | |
| Voltage | Per Channel Control Voltage Range | 25mV~5V |
| Minimum discharge voltage | Upper and lower clamp discharge to 1V , 2m cables to 1.5V | |
| Accuracy | ± 0.05% of FS | |
| Stability | ± 0.05% of FS | |
| Current | Per Channel Current Range | Range 1: 0.5mA~0.1A Range 2: 0.1A~3A Range 3: 3A~6A |
| Constant current cut-off current | Range 1: 0.2mA Range 2: 6mA Range 3: 12mA | |
| Accuracy | ± 0.05% of FS | |
| Stability | ± 0.05% of FS | |
| Power | Per Channel Output Power | 35W |
| Stability | ± 0.1% of FS | |
| Time | Rise Time | <1ms |
| Step Time Range | ≤(365*24 )hour/step, Time Form Support 00: 00: 00.000(h, min, s, ms) | |
| Data Recording | Record Condition | Time△t: 100ms |
| Voltage△U: 10mA | ||
Current△I: Range 1: 2mA； Range 2: 6mA , Range 3: 12mA | ||
| Record Frequency | 10Hz | |
| Charge | Charge Mode | Constant Current Discharge, Constant Voltage Discharge, Constant Resistance Discharge, Pulse Discharge |
| End Condition | Voltage, Current, Relative Time, Capacity, -△V | |
| Discharge | Discharge Mode | Constant Current Discharge, Constant Voltage Discharge, Constant Resistance Discharge, Pulse Discharge |
| End Condition | Voltage, Current, Relative Time, Capacity, -△V | |
| Pulse Test | Charge | Constant Current Charge, Constant Power Charge |
| Discharge | Constant Current Discharge, Constant Power Discharge | |
| Minimum Pulse Width | 500ms | |
| Pulse Number | 32 diffirent pulse for a single step | |
| Charge And Discharge Switch | Continuous switched for a single pulse step | |
| End Condition | Voltage, Relative Time | |
| DCIR test supported | ||
| Cycle | Loop Measure Range | 1~65535 times |
| Max Steps Per Loop | 254 | |
| Nested Loop | Nested loop Function, Max Support 3 Layers | |
| Protection | Power-down Data Protection | |
| Off-line Testing Function | ||
Setting Protection Condition, Setting Parameter: Low Voltage limit, Upper Voltage limit, Low Current limit, Upper Current limit, Delay Time , Anti-reverse Protection Model | ||
| Voltage and Current Testing Sample | 4-wire connecting | |
| Noise | <55dB | |
| Database | MySQL Database | |
| A Means of Communication of Upper Machine | TCP/IP Protocol | |
| Data Output | EXCEL 2003, 2010, TXT | |
| Server disk configuration | 500GB | |
| Communication Interface | Internet Access | |
| Server Operating System | Windows 7 | |
| Leak current | <5μA | |
| Per Unit Main Channels No. | 8 | |
| Clamp | Alligator clamp, Polymer clamp, Ring clamp optional | |
| Dimension | L483 * W404 * H130mm | |
Warranty
1 year warranty with lifetime support. Man-made damage is not covered.
FAQ
1. Are you a manufacturer?
A: Yes, our factory is located in Shenzhen, China.
We have more than 10 year experience for manufacturing battery lab
research equipment. We own a professional R&D department.
2. Do you accept customized product?
A: Yes. Most of our products can be customized to meet different
requirements.
3. Will you provide test video before dispatch?
A: Yes, we take test video for every equipment before dispatch,
which will display how to use it.
4. Can you offer overseas installation service?
A: Yes, we can dispatch professional engineer for on-site
installation service.
