Shenzhen TICO Technology Co.,Ltd. |
Verified Suppliers
|
|
8 Channels 5V50mA Battery Testing Equipment
Product Introduction
CT-4008-5V50mA-164 is a 8 channels battery testing system from 5μA~1mA,1mA~25mA, 25mA~50mA. Each channel can be controlled independently. It is widely used for coin cell testing, three electrode testing, material testing. It is a perfect testing device for universities, research institution.
Features
● Each channels is controlle independently.
● Double range.
● High testing efficiency.
● Widely application.
● Compact size, easy to move.
Technical Parameter
Input Power | AC 220V ±10% / 50Hz | |
Resolution | AD16bit; DA: 16bit | |
Input Resistance | ≥1GΩ | |
Input Power | 25W | |
Channel Features | Constant Current Source and Constant Voltage Source with Independent pairs of Closed-loop Structure | |
Channel Control Mode | Independent Control | |
Voltage | Per Channel Control Voltage Range | 25mV~5V |
Minimum discharge voltage | -5V | |
Accuracy | ± 0.05% of FS | |
Stability | ± 0.05% of FS | |
Current | Per Channel Current Range | Range 1: 5μA~1mA , Range 2: 1mA~25mA, Range 3: 25mA~50mA. |
Constant current cut-off current | Range 1: 2μA, Range 2: 50μA , Range 3: 100μA. | |
Accuracy | ± 0.05% of FS | |
Stability | ± 0.05% of FS | |
Power | Per Channel Output Power | 0.25W |
Stability | ± 0.1% of FS | |
Time | Current Response Time | <500μs |
Step Time Range | ≤(365*24 )hour/step. Time Form Support 00: 00: 00.000(h, min, s, ms) | |
Data Recording | Record Condition | Time△t: 100ms |
Voltage△U: 10mV | ||
Current△I: Range 1: 2μA, Range 2: 50μA , Range 3: 100μA. | ||
Record Frequency | 10Hz | |
Charge | Charge Mode | Constant Current Charge, Constant Voltage Charge, Constant Current and Constant Voltage ChargeConstant Power Charge |
End Conditon | Voltage, Current, Relative Time, Capacity, -△V | |
Discharge | Discharge Mode | Constant Current Discharge,Constant Power Discharge, Constant Resistance Discharge |
Discharge Mode | Voltage, Current, Relative Time, Capacity, -△V | |
DCIR test supported | ||
Pulse Test | Charge | Constant Current Charge, Constant Power Charge |
Discharge | Constant Current Discharge, Constant Power Discharge | |
Minimum Pulse Width | 500ms | |
Pulse Number | 32 diffirent pulse for a single step | |
Charge And Discharge Switch | continuous switched for a single pulse step | |
End Condition | Voltage, Relative Time | |
Cycle | Loop Measure Range | 1~65535 times |
Max Steps Per Loop | 254 | |
Nested Loop | Nested loop Function, Max Support 3 Layers | |
Protection | Software Protection | Power-down Data Protection |
Off-line Testing Function | ||
Setting Protection Condition, Setting Parameter: Low Voltage limit, Upper Voltage limit, Low Current limit, Upper Current limit, Delay Time | ||
Hardware Protection | Additional Anti-reverse Protection Model | |
Voltage and Current Testing Sample | 4-wire connecting | |
Noise | <85dB | |
Database | MySQL Database | |
A Means of Communication of Upper Machine | TCP/IP Protocol | |
Data Output | EXCEL 2003, 2010, TXT | |
Communication Interface | Internet Access | |
Server Operating System | Windows 7 | |
Leak current | 0.005μA | |
Per Unit Main Channels No. | 8 | |
Dimensions | L443 * W307 * H48mm |
Warranty
1 year warranty with lifetime support. Man-made damage is not covered.
FAQ
1. Are you a manufacturer?
A: Yes, our factory is located in Shenzhen, China.
We have more than 10 year experience for manufacturing battery lab
research equipment. We own a professional R&D department.
2. Do you accept customized product?
A: Yes. Most of our products can be customized to meet different
requirements.
3. Will you provide test video before dispatch?
A: Yes, we take test video for every equipment before dispatch,
which will display how to use it.
4. Can you offer overseas installation service?
A: Yes, we can dispatch professional engineer for on-site
installation service.