|
[China]
Trade Verify
Address: Room 806, Building T2 , JinMaoWan, HuangGe Town, NanSha District,Guangzhou,China
Contact name:Tina
Guangzhou Dekai Auto Part Co.,Ltd |
|
Verified Suppliers
|
|
|
1516890153 1516890152 1 51689015 2 Isuzu Front Stabilizer Bracket Sleeve bushing
| Part No. | WW6H011 |
| OEM No. | 1516890153 1516890152 |
| Description | Isuzu Front Stabilizer Bracket Sleeve bushing |
| Model | ISUZU NQR90 FVR |
WW6H011 1516890153 1516890152
More Parts:
| Part NO. | OEM NO. | Part Name | Model |
| WW10060 | 8971461482 | Oil pan gasket | 4HG1/4HG1-T/4HE1/4HK1 |
| WW10061 | 8973643860 | Oil pan gasket | 700P 4HK1 |
| WW10062 | 8970397771 | Turbocharger gasket | 4HG1-T |
| WW10064 | 8970778290 | Camshaft | 4HG1 / 4HF1/4HE1 |
| 8970145730 | 8970145730 | Camshaft | NPR 4BD1 4BC2 |
| WW10065 | 8971198090 | Fuel nozzle 4HG1 (NP-DLLA154PN185) | 4HG1/4HE1 |
| WW10066 | 8973522670 | Fuel nozzle 4HG1-Т (NP-DLLA143PN325) | 4HG1-T |
| 8970948030 | 8970948030 | Fuel nozzle | 4HF1 |
| WW10067 | WW10067 | Oil filter bracket repair kit | 4HG1 / 4HG1-T / 4HK1 / 4HE1 / 4HF1 |
| WW10068 | 8943388781 8973841300 8980454470 | Oil radiator repair kit | 4HG1 / 4HG1-T / 4HK1 / 4HE1 / 4HF1 |
| WW10069 | WW10069 | Engine cover front repair kit | 4HG1 / 4HG1-T |
| WW10070 | 8976023790 | Crankshaft oil seal rear | 6HE1 |
| WW10071 | 8973297800 | Crankshaft oil seal front | 4HG1 / 4HG1-T / 4HK1 / 4HE1 / 4HF1 |
| WW10072 | 9442610405 | High pressure fuel pump oil seal | 4HG1 / 4HG1-T |
| WW10073 | 1825130442 | Plug in / glow plunge | 4HF1/6BD1/4HE1 |
| 9825139590 | 9825139590 | Plug in / glow plunge | NKR55/4JB1 |
| WW10074 | 8971224942 | Accelerator cable | 4HG1 / 4HG1-T |
| WW10075 | 8978562234 | Accelerator cable (hand regulation) | NKR94/NPR/4HE1 |
| WW10076 | 8972006152 8972006150 | Oil feeding tube | 4HG1-T |
| WW10077 | 8970935471 | Oil feeding tube 4HG1 | NPR/4HF1 |
| WW10079 | 8972094931 | Fuel tube №1 8972094931 | 4HG1-T |
| WW10080 | 8972094941 | Fuel tube №2 8972094941 | 4HG1-T |
| WW10081 | 8972094951 | Fuel tube №3 8972094951 | 4HG1-T |
| WW10082 | 8972094961 | Fuel tube №4 | 4HG1-T |
| WW10083 | 8941560520 | Air filter 4HG1 | 600P NPR 4BD1 |
| WW10084 | 8970622940 | Air filter 4HG1-T | 700P 4HK1 4JJ1 |
Brake chamber
The spring brake assemblyconsists of the service brake and
parking/emergency brake. The service brake is the section at the
clamp closest to the axle. The diaphragm, pushrod and return spring
may be serviced by removing the clamp. The spring/emergency brake
is everything from the first clamp to the end farthest from the
axle.The spring brake assemblyconsists of the service brake and
parking/emergency brake. The service brake is the section at the
clamp closest to the axle. The diaphragm, pushrod and return spring
may be serviced by removing the clamp. The spring/emergency brake
is everything from the first clamp to the end farthest from the axle.Spring Brakes Function
The spring brake assembly is bolted to a mounting bracket on the
axle. The spring brake pushrod clevis is attached to a slack
adjuster which is attached to a camshaft. As the spring brake
pushrod is extended from the chamber, either by the
parking/emergency brake or by service air pressure, the linear
force of the pushrod is converted to rotational force by the slack
adjuster and camshaft. This spreads the brake shoes against the
brake drum.
When air is applied to the parking/emergency brake, the load of the
heavy spring is released allowing the wheels to turn. When the
driver steps on the brake pedal, a signal is sent to a relay valve
that then sends air pressure to the service chamber of the spring
brake. The air pressure causes the pushrod to extend which in turn
applies the brake. This air pressure is released once the driver
takes his or her foot off of the brake pedal.
The spring brake is designed to apply the brakes automatically in
the event that there is a loss of system air pressure. This happens
because the air pressure holding back the heavy parking/emergency
spring dissipates allowing the spring to extend the pushrod which
in turn applies the brake.
FAQ
1.Q:What is your terms of payment?
A:T/T 30% as deposit, and 70% before delivery. We will send you the
packing list and the photos of the products before your payment.
2.Q:Do you have MOQ request?
A: We don’t have MOQ request. We are wholesaler for ISUZU Truck
spare parts, we have a large stock of products.
3.Q: What is the delivery time?
A: The delivery is depends on the storage. If the items we have in
stock, we can make delivery within 7days. For the items need to be
ordered the delivery is betwen20-45 days.
4.Q.:Can you produce according to the samples?
A: Clients’sample is welcome. We are able to produce the specific
products according to your sample.
5.Q: Can l get a lower price if l order large quantities?
A: Yes, cheaper prices with bigger amount of order.
