Active Member
|
[China]
Contact name:
Changzhou Taisheng Machinery Equipment Co.,Ltd. |
|
|
Manual Control Mode Steel Parts Cart Sand Blast Cabinet , Suction Blast Cabinet
Specifications
Working cabinet dimensions | 1000mm*1000mm*800mm |
Power Supply | 220V 50Hz |
Air pressure | 0.3-0.7Mpa(kg/cm2) |
Air consumption(Approx) | 0.8~1.2m³/min |
Quantity of process Gun | 1pc |
Load capacity | Decided by clients |
Motor for dust collector | 550W/750W AC220V 50Hz |
Machine lighting | 15W AC220V 50Hz |
Initial media charge(Approx) | 5~10Kg |
Weight of the machine(Approx) | 400Kg |
Abrasive recommended | Alumina oxide, Glass beads |
What is a Blast Cabinet?
A Blast Cabinet is a unit where an abrasive blasting process is utilized inside a closed loop system. Unlike the conventional blast pots, the cabinets allow the operator to blast the workpiece, keeping the spent abrasive contained inside protecting the operator and surrounding area while recycling the abrasive continuously.
Types of Blast Cabinets
There is two main types of blast cabinets known as Pressure Blast Cabinets and Suction Blast Cabinets. The most effective of the two is the pressure blast cabinet which utilizes a pressurized container to blast the workpiece resulting in much higher productivity, brilliant for high volume blasting. Siphon cabinets, also know as suction cabinets, use much less compressed air and are generally smaller units making them perfect for smaller workshops or lower productivity environments. Siphon cabinets uses a compressed air stream inside a siphon blast gun to create a vacuum in a chamber creating a negative pressure, pulling the abrasive into the nozzle whereas the Pressure Cabinets push the abraisve out of a pressurized vessel, through a metering valve and out of the nozzle.
TS blast cabinet is suitable for less demanding users who still expect reliable and high-quality blasting cabinet.
Main characteristics of the machine:
Right side door for easy loading.
Resilient-to-scratches LED lighting system for exceptional visibility
Foot pedal operated blasting
Automatic safety switch
Tool-free glass change in minutes
Actual space requirements for a complete system depends on the equipment configuration, options and requested work flow. Take care also about additional work space for the operator and for maintenance access.
TS blast cabinets can be customized with many optional accessories like:
Boron carbide nozzles 6, 8, 10 ,12mm
Blow-off (blowing) gun
Blast gun holder
Inside rubber lining
Rubber/plastic blast gloves
Metal ring for glove attachment
Manual turntable
Feet pedal
Recommended equipment and accessories:
Abrasive media
Dust collector or recycling unit
It is used to:
Remove rust, mill scale, heat treatment scale, and carbon build up from metals
Strip paint, powder coating, plating, and anodizing from parts for rework
Eliminate burrs, parting lines, flashes, and other defects from castings and injection-moulded parts
Remove residual sand from castings
Beautify steel, stainless steel, aluminium, brass and other metals with a uniform satin finish
Etch artwork and apply lettering on glass, stone, plastics, metal and other materials
Clean release agents and material build up from moulds
Packing of Cart and Turntable:
