Active Member
|
[China]
Contact name:
Changzhou Taisheng Machinery Equipment Co.,Ltd. |
|
|
Q378 Double Hanger Type Shot Blasting Machine Cleaning Batch Aluminimum Casting High Efficiency
Quick detail
| Workpiece Description | Max part dimension | Φ800*1500mmH |
| Max part weight | ＜1000kg | |
| Cleaning requirement | Meet standard of GB8923-88 A-B Sa2½, surface roughness Ra12.5 | |
| Time of cleaning one hook | Casting 8-15min; Forging 5-8min | |
| Noise Level | ≤85 dB | |
| Dust Emission | ≤80 mg/m³ | |
| Recommend Abrasive | Φ0.2～Φ1.0mm steel cut wire or steel shot | |
| Abrasive Initial Feed | 1.0-1.5T | |
| Machine Footprint | L2730mm*W5760mm* H4690mm | |
| Pit Foundation | Not required | |
| Compressed Air Consumption | <0.6m3/min/0.4Mpa | |
| Total Power | 38kw | |
Application possibilities
TS Spinner Hanger Machines are designed to clean a wide range of parts size and shapes. These shot blasting machines can be set up with dual swing doors, I or Y hanger and with multiple blast wheels. Parts are loaded onto a hanger and moved in, started rotating, got blasted and moved out.
Widely used in small and medium size of stainless steel parts, castings, die castings, forgings, welding structures and heat treatment parts surface cleaning and strengthening.
Advantages of using TS Spinner Hanger Machine
Machine Introduction
It is composed by shot blasting cabinet, blasting system, electrical hanger system, rotation system, abrasive recovery system, dust removal system, electrical control system and so on.
Blast Cabinet
This machine equips with wear-resistant manganese steel plate Mn13 as protective.
Pulse-jet Air Clean System: The dust collector has a programmable time board to “pulse” the cartridges with a jet of compressed air between blast cycle to purge the filter.
Electrical Control System 380V/50Hz/3phase (Customize)
