Active Member
|
[China]
Address: D41-1/01 BLOCK,D FENQU,XIPENG ZUTUAN,XIANGTANG VILLAGE,XIPENG TOWN,JIULONGPO DISTRICT,CHONGQING
Contact name:Masha Cui
Chongqing Dongchong Aluminum Co., Ltd. |
|
|
1100 H22 0.08mm Industrial Aluminum Foil for Heat Exchange 200mm Width
Production Description
Hydrophilic aluminum foil is a kind of hydrophilic treatment for aluminum foil. After a special process, a layer of hydrophilic layer is coated on the surface of the aluminum foil. The condensed water will disperse quickly on the hydrophilic aluminum foil, and will not condense into water droplets, thus increasing the heat exchange area and speeding up the cooling and heating speed, the noise caused by the condensation water blocking the air flow is also effectively avoided. Hydrophilic aluminum foil is the main raw material of heat exchanger for household air conditioner, which has a great influence on the efficiency of air conditioner. If the raw material of heat exchanger is hydrophilic aluminum foil, the refrigeration efficiency can be increased by 5% , and it has the function of anti-corrosion, anti-mildew and no peculiar smell. National Standard GB / T 3880-2006 for aluminium alloy sheet and strip. In GB / T3880-2006, the thickness of 0.2 mm or less is called aluminum foil.
| ALLOY | CHEMICAL COMPOSITION (%) | |||||||||||||
| Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Zr | Other | Al | |||
| 1035 | 0.35 | 0.6 | 0.1 | 0.05 | 0.05 | __ | __ | 0.1 | 0.03 | __ | 0.03 | __ | 99.35 | |
| 1100 | 0.95 | 0.05-0.2 | 0.05 | __ | __ | __ | 0.1 | __ | __ | 0.05 | 0.15 | 99 | ||
| 1050 | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | __ | __ | 0.05 | 0.03 | __ | 0.03 | __ | 99.5 | |
| 1060 | 0.25 | 0.35 | 0.05 | 0.03 | 0.05 | __ | __ | 0.05 | 0.03 | __ | 0.03 | __ | 99.6 | |
| 1070 | 0.2 | 0.25 | 0.04 | 0.03 | 0.03 | __ | __ | 0.04 | 0.03 | __ | 0.03 | __ | 99.7 | |
| 3003 | 0.6 | 0.7 | 0.05-0.2 | 1.0-1.5 | 0.1 | 0.05 | 0.15 | rest | ||||||
| 3004 | 0.3 | 0.7 | 0.25 | 1.0-1.5 | 0.8-1.3 | __ | __ | 0.25 | __ | __ | 0.05 | 0.15 | rest | |
| 3104 | 0.6 | 0.8 | 0.05-0.25 | 0.8-1.4 | 0.8-1.3 | __ | __ | 0.25 | 0.1 | __ | 0.05 | 0.15 | rest | |
| 3105 | 0.6 | 0.7 | 0.3 | 0.3-0.8 | 0.2-0.8 | 0.2 | __ | 0.4 | 0.1 | __ | 0.05 | 0.15 | rest | |
| 8011 | 0.5-0.9 | 0.6-1.0 | 0.15-0.4 | 0.2 | 0.05 | 0.05 | __ | 0.01 | 0.08 | __ | 0.05 | 0.15 | rest | |
| 8079 | 0.05~0.3 | 0.7~1.3 | 0.05 | __ | __ | __ | __ | 0.1 | __ | 0.05 | 0.15 | rest | ||
Secifications
| Products Catalogues | Alloy | Temper | Gauge | Width | Surface Finishing |
| Beer neck foil | 8011 | O | 0.009-0.012mm | 360-1600mm | one side briht,one side matte |
| Foil lid | 8011 | O | 0.025-850MM | 300-850MM | one side briht,one side matte, or both bright |
| Flexible foil packaging | 1235 8011 | O | 0.006-0.03MM | 200-1600M | one side briht,one side matte |
| Blister foil(cold forming) | 8021 | O | 0.040-0.075MM | 200-1100MM | one side briht,one side matte |
| Blister foil(press through packaging PTP) | 8011 | h18 | 0.020.03MM | 200-1100MM | one side briht,one side matte |
| Foil stock | 8011.8150.1235 | H18/H16/H14 | 0.2-0.4MM | 900-1600MM | |
| Household aluminum foil | 8011 | O | 0.009-0.025MM | 300-450MM | one side briht,one side matte |
| Fin-stock foil | 8011.3102.1100 | O/H22/H26 | 0.09-0.30MM | 200-1600MM | both side bright |
| Food container foil | 3003.8011 | O/H22/H24 | 0.04-0.20MM | 200-1600MM | both side bright |
| Aluminum coil for color coating | 1xxx.3xxx.8011 | Hx4/Hx6/Hx8 | 0.1-1.0MM | 900-1600MM | |
| Aluminum PP cap stock | 8011 | H16/H14 | 0.1-0.3MM | 600-1600MM | |
| Aluminum PS substrate for printing | 1050.1060 | H18 | 0.1-0.3MM | 650-1300MM | |
| Aluminum foil ACP material | 1100.3003 | H18 | 0.15-0.5MM | 9001600MM | |
| Aluminum coasting rolled coil | 1xxx.3xxx.8xxx | F | 6-10MM | 1000-1600MM | |
| Common alloy coil | common alloy coil are used for a wide variety of application. Loften^s plant are able to produce aluminum coils with a wide spectum of alloys | ||||
Product Features
1, Excellent hydrophilicity and corrosion resistance;
2, good formability and non-wear to die;
3, strong resistance to stamping oil, solubility, heat resistance;
4, Small Airflow Resistance, the heat exchange rate can generally be increased by 10%-15% .
Photos
Company Introduction
Established for nearly 20 years, CHONGQING DONGCHONG ALUMINUM CO.,LTD. who mainly engages in aluminum industry product research, design, sales and has two subsidiaries yet, with professional equipment, mature technology, excellent team, whose annual sales have ranked first in the southwest region of China.
We have long-term cooperation with many outstanding euterprises, whose product quality is convincing.Our company provides custom-made services, in the product accuracy far more than peers.
| Equipment Production Parameters By Chongqing Dongchong Aluminum Co.,Ltd | |||||||
| 1650mm Slitting machine | Uncoil(MM) | Finished size(MM) | Slitting Width(MM) | ||||
| ID | OD | Width | Thickness | ID | OD | Above 0.5mm≥ 20mm | |
| Φ 400 | ≤ 1800 | ≤ 1600 | 0.5-4.5 | Φ 400 | ≤ 1700(normal) | ||
| Φ 500 | Φ500(normal) | ||||||
| Φ 600 | |||||||
| 650mm Slitting machine | Uncoil(MM) | Finished size(MM) | |||||
| ID | OD | ||||||
