Home Companies Chongqing Dongchong Aluminum Co., Ltd.

Gold Anodized H32 2mm 6mm 5052 Aluminium Alloy Sheet

Active Member

Contact Us

[China]

Address: D41-1/01 BLOCK,D FENQU,XIPENG ZUTUAN,XIANGTANG VILLAGE,XIPENG TOWN,JIULONGPO DISTRICT,CHONGQING

Contact name:Masha Cui

Chongqing Dongchong Aluminum Co., Ltd.

Gold Anodized H32 2mm 6mm 5052 Aluminium Alloy Sheet

Country/Region	china
City & Province	chongqing chongqing
Categories	Aluminum Sheets

Product Details

Gold Anodized 5052 H 32 1.5 mm 2 mm 6 mm Aluminium Alloy Sheet For Decoration

Product Description

According to different surface treatment methods, aluminum alloy coil can be divided into Mirror surface aluminum plate, Brushed aluminum plate, Anodized aluminum plate, PE coated aluminum plate, PVDF coated aluminum plate etc.

After anodizing, the surface of the aluminum can produce a few microns-hundreds of microns of oxide film. Compared with the natural oxide film of aluminum alloy, its corrosion resistance, wear resistance and decorative properties have been significantly improved and improved. In fact, the direct current sulfuric acid anodic oxidation method is the most common application, because it is suitable for aluminum and most Anodizing of aluminum alloy; thicker film, hard and wear-resistant, better corrosion resistance after sealing; film colorless and transparent, strong adsorption capacity, easy to color; lower processing voltage, less power consumption ; The treatment process does not need to change the voltage cycle, which is conducive to continuous production and practical operation automation

Chemical Composition

ALLOY	CHEMICAL COMPOSITION (%)
ALLOY	Si	Fe	Cu	Mn	Mg	Cr	Ni	Zn	Ti	Zr	Other		Al
3003	0.6	0.7	0.05-0.2	1.0-1.5				0.1			0.05	0.15	rest
3004	0.3	0.7	0.25	1.0-1.5	0.8-1.3	__	__	0.25	__	__	0.05	0.15	rest
3104	0.6	0.8	0.05-0.25	0.8-1.4	0.8-1.3	__	__	0.25	0.1	__	0.05	0.15	rest
3105	0.6	0.7	0.3	0.3-0.8	0.2-0.8	0.2	__	0.4	0.1	__	0.05	0.15	rest
5052	0.25	0.4	0.1	0.1	2.2-2.8	0.15-0.35	__	0.1	__	__	0.05	0.15	rest
5A06	≤0.40	0.000～0.400	≤0.10	0.50～0.8	5.8～6.8	__	0.0001～0.005	≤0.20	0.02～0.10	__	0.05	0.1	rest
5005	0.3	0.7	0.2	0.2	0.5-1.1	0.1	__	0.25	__	__	0.05	0.15	rest
5050	0.4	0.7	0.2	0.1	1.1-1.8	0.1	__	0.25	__	__	0.05	0.15	rest
5154	0.25	0.4	0.1	0.1	3.1-3.9	0.15-0.35		0.25	0.2		0.05	0.15	rest
5754	0.4	0.4	0.1	0.5	2.6-3.6	0.3	__	0.2	0.15	__	0.05	0.15	rest
5454	0.25	0.4	0.1	0.5-1.0	2.4-3.0	0.05-0.2		0.25	0.2		0.05	0.15	rest
5182	0.2	0.35	0.15	0.2-0.5	4.0-5.0	0.1		0.25	0.1		0.05	0.15	rest
5083	0.4	0.4	0.1	0.4-1.0	4.0-4.9	0.05-0.25	_	0.25	0.15	__	0.05	0.15	rest
5086	0.4	0.5	0.1	0.2-0.7	3.5-4.5	0.05-0.25		0.25	0.15		0.05	0.15	rest
6060	0.3-0.6	0.1-0.3	0.1	0.1	0.35-0.6	0.05		0.15	0.1		0.05	0.15	rest
6061	0.4-0.8	0.7	0.15-0.4	0.15	0.8-1.2	0.04-0.35	__	0.25	0.15	__	0.05	0.15	rest
6063	0.2-0.6	0.35	0.1	0.1	0.45-0.9	0.1	__	0.1	0.1	__	0.05	0.15	rest

Aluminium Material Grade

1)1000series aluminium /Pure Aluminum/Pure Aluminium:1050,1060,1070,1080,1100,1350,etc

2)2000series aluminium alloy/Hard Aluminum/Hard Aluminium/Aluminum-Copper Alloy/ Aluminium-Copper Alloy:2011,2014,2017,2024,etc

3)3000series aluminium alloy/ Rust-Proof Aluminum/Rust-Proof Aluminium/ Aluminum-Manganese Alloy:3002,3003,3104,3204,3030,etc

4)5000series aluminium alloy/ Rust-Proof Aluminum/Rust-Proof Aluminium /Aluminum-Magnesium Alloy:5005,5025,5052,5040,5054,5056,5083,5152,etc

5)6000series aluminium alloy / Aluminum-Magnesium-Silicon Alloy /Aluminium-Magnesium-Silicon Alloy /:6101,6003,6061,6063,6020,6201,6262,6082,etc

6)7000series aluminium alloy/ Aluminum-Zinc Alloy/ Aluminium-Zinc Alloy:7003,7005,7050,7075,etc

7)8000series aluminium alloy:8011,etc

Mechanical properties:

Alloy	Temper	Thickness(mm)	Tensile strength(Mpa)	Yeild strength(Mpa)	Elongation(%)
Alloy	Temper	Thickness(mm)	Min
5052	H111 O	>0. 20 — 0. 50	170 — 215	65	12
		>0. 50 — 1. 50			14
		>1.55 — 3.00			16
		>3. 00 — 6. 00			18
		>6.00 — 12. 50	165-215		19
		>12. 50 — 50.00	165-215		—
	H12	>0. 20 — 0. 50	210 — 260	160	4
		>0.5-1.5			5
		>1.50 —3.00			6
		>3, 00 — 6. 00			8
	H14	>0. 20 — 0. 50	230-280	180	3
		>0.50-1.50			3
		>1. 50 -3. 00			4
		>3.00 — 6.00			4
	H16	>0. 20 — 0, 50	250—300	210	2
		>0. 50 — 1. 50			3
		>1. 5- 3.0			3
		>3.00 — 4. 00			3
	H18	>0. 20-0.50	270	240	1
		>0. 50 — 1. 50			2
		> 1.50 — 3.00			2
	H22 H32	>0. 20—0. 50	210 — 260	130	5
		>0. 50-1.50			6
		>1.50 — 3.00			7
		>3. 00 — 6. 00			10
	H24 H34	>0. 20 — 0. 50	230 — 280	150	4
		>0.50 — 1. 50			5
		>1,50 — 3.00			6
		>3.00 — 6.00			7
	H26 H36	>0. 20 — 0.50	250 — 300	180	3
		>0. 50 — 1, 50			4
		>1.50—3.00			5
		>3. 00—4. 00			6
	H38 H28	>0. 20 — 0, 50	270	210	3
		>0. 50~1. 5			3
		>1. 50 — 3. 00			4
	H112	>6.00—12. 50	190	80	7
		>12. 50 — 40,00	170	70
		>40, 00 — 80, 00	170	70

Product Photo

Company Introduction

Equipment Production Parameters By Chongqing Dongchong Aluminum Co.,Ltd
1650mm Slitting machine	Uncoil(MM)				Finished size(MM)		Slitting Width(MM)
	ID	OD	Width	Thickness	ID	OD	Above 0.5mm≥ 20mm
	Φ 400	≤ 1800	≤ 1600	0.5-4.5	Φ 400	≤ 1700(normal)
	Φ 500				Φ500(normal)
	Φ 600
Aluminum foil Slitting machine	Uncoil(mm)				Finished size(MM)
	ID	OD	Width	Thickness	ID	OD	Width
	Φ 76	≤ 550	≤ 1200	0.08-0.12	Φ76Φ76	≤ 550(normal)
1450mm Crosscutting machine	Uncoil(MM)				Finished size(MM)
	ID	OD	Width	Thickness	ID	OD	Width
	Φ 505	≤ 1780	≤ 600	0.1-1.5	Φ150 Φ300 Φ400 Φ500	≤ 1700(normal)	6-600
	Φ 605
Annealling Furnace	Furnace Temperature		Furnace Size
	≤440°C		320020002100
Saw Cutting	Thickness(mm)		Width (mm)			Length (mm)
	Size		Size		Tolerance	Size
	≤200		≤2000		±0.3	≤3000

Contact Us

Chongqing Dongchong Aluminum Co., Ltd.

Gold Anodized H32 2mm 6mm 5052 Aluminium Alloy Sheet

Product Details

Hot Products

Gold Anodized H32 2mm 6mm 5052 Aluminium Alloy Sheet

Liquid Containers Rust Proof H32 3003 Aluminium Sheet

Anti Corrosion Anodized 3mm Billboard 1100 Aluminum Sheet

Cosmetic Shell H18 1070 Color Coated Aluminum Sheet

1500 X 3000mm Mirror Anodized 1050 H28 Aluminum Alloy Sheet

Machinery Parts Brushed 6061 T4 Custom Aluminium Sheet