Home Companies Chongqing Dongchong Aluminum Co., Ltd.

Machinery Parts Brushed 6061 T4 Custom Aluminium Sheet

Active Member

Contact Us

[China]

Address: D41-1/01 BLOCK,D FENQU,XIPENG ZUTUAN,XIANGTANG VILLAGE,XIPENG TOWN,JIULONGPO DISTRICT,CHONGQING

Contact name:Masha Cui

Chongqing Dongchong Aluminum Co., Ltd.

Machinery Parts Brushed 6061 T4 Custom Aluminium Sheet

Country/Region	china
City & Province	chongqing chongqing
Categories	Aluminum Sheets

Product Details

6061 T 4 Brushed Anodized Anodized Aluminium Alloy Sheet For for Machinery Parts

Product Description

After anodizing, the surface of the aluminum can produce a few microns-hundreds of microns of oxide film. Compared with the natural oxide film of aluminum alloy, its corrosion resistance, wear resistance and decorative properties have been significantly improved and improved. In fact, the direct current sulfuric acid anodic oxidation method is the most common application, because it is suitable for aluminum and most Anodizing of aluminum alloy; thicker film, hard and wear-resistant, better corrosion resistance after sealing; film colorless and transparent, strong adsorption capacity, easy to color; lower processing voltage, less power consumption ; The treatment process does not need to change the voltage cycle, which is conducive to continuous production and practical operation automation

6061 aluminum alloy is a high-quality aluminum alloy product produced by heat treatment pre-stretching process. It has excellent processing performance, excellent welding characteristics and electroplating, good corrosion resistance, high toughness and no deformation after processing, and the material is dense and defect-free And easy to polish, easy to paint film, excellent oxidation effect and other excellent features.
Typical uses of 6061 include aerospace fixtures, electrical fixtures, and communications. They are also widely used in automated machinery parts, precision machining, mold manufacturing, electronics and precision instruments, SMT, PC board solder carriers, etc.

Chemical Composition

ALLOY	CHEMICAL COMPOSITION (%)
ALLOY	Si	Fe	Cu	Mn	Mg	Cr	Ni	Zn	Ti	Zr	Other		Al
3003	0.6	0.7	0.05-0.2	1.0-1.5				0.1			0.05	0.15	rest
3004	0.3	0.7	0.25	1.0-1.5	0.8-1.3	__	__	0.25	__	__	0.05	0.15	rest
3104	0.6	0.8	0.05-0.25	0.8-1.4	0.8-1.3	__	__	0.25	0.1	__	0.05	0.15	rest
3105	0.6	0.7	0.3	0.3-0.8	0.2-0.8	0.2	__	0.4	0.1	__	0.05	0.15	rest
5052	0.25	0.4	0.1	0.1	2.2-2.8	0.15-0.35	__	0.1	__	__	0.05	0.15	rest
5A06	≤0.40	0.000～0.400	≤0.10	0.50～0.8	5.8～6.8	__	0.0001～0.005	≤0.20	0.02～0.10	__	0.05	0.1	rest
5005	0.3	0.7	0.2	0.2	0.5-1.1	0.1	__	0.25	__	__	0.05	0.15	rest
5050	0.4	0.7	0.2	0.1	1.1-1.8	0.1	__	0.25	__	__	0.05	0.15	rest
5154	0.25	0.4	0.1	0.1	3.1-3.9	0.15-0.35		0.25	0.2		0.05	0.15	rest
5754	0.4	0.4	0.1	0.5	2.6-3.6	0.3	__	0.2	0.15	__	0.05	0.15	rest
5454	0.25	0.4	0.1	0.5-1.0	2.4-3.0	0.05-0.2		0.25	0.2		0.05	0.15	rest
5182	0.2	0.35	0.15	0.2-0.5	4.0-5.0	0.1		0.25	0.1		0.05	0.15	rest
5083	0.4	0.4	0.1	0.4-1.0	4.0-4.9	0.05-0.25	_	0.25	0.15	__	0.05	0.15	rest
5086	0.4	0.5	0.1	0.2-0.7	3.5-4.5	0.05-0.25		0.25	0.15		0.05	0.15	rest
6060	0.3-0.6	0.1-0.3	0.1	0.1	0.35-0.6	0.05		0.15	0.1		0.05	0.15	rest
6061	0.4-0.8	0.7	0.15-0.4	0.15	0.8-1.2	0.04-0.35	__	0.25	0.15	__	0.05	0.15	rest
6063	0.2-0.6	0.35	0.1	0.1	0.45-0.9	0.1	__	0.1	0.1	__	0.05	0.15	rest

Mechanical properties:

Tensile strength is above 205 MPa

Compressive yield strength 55.2 MPa

Elastic coefficient 68.9 GPa

Bending ultimate strength 228 MPa

Bending Yield Strength 103 MPa

Specification
Alloy	Temper	Thickness/mm
1050,1060,1070, 1100,3003,5005	H12,H14,H16,H18 ,H24	>0.20~3.00
5052	H12,H22,H24,H32,H34
6061,6063	T5,T6

Product Photo

Company Introduction

Chongqing Dongchong AluminumCo,.Ltd. is a manufacturer of Aluminium products with well-equipped,experienced work team.Our company is equipped with international advanced aluminum production lines. We also own press machine, double-sided milling, cutting machine, recoiler, grinding machine, quenching furnace, tension pre-stretching machine, annealing furnace, smelting furnace machine and so on. We mainly provide aluminum and its alloy sheets, plates, strips, circles, foils, embossed coils, colorful painted aluminum coils, sheet products, etc.With a wide range, good quality, reasonable prices and stylish designs, our products can meet most of all customer needs.Our company established in 2002 and have been in aluminium indurstry for more than 15 years.We have our own brand and customized services are available too.We are an ISO9001:2008 certified company and our QC staff members have ten years' experience in this area. To maintain a strict QC system, we not only utilize precision testing instruments but also continuously train our QA personnel regarding the latest testing principles.We have established long term business relationships with customers in many countries and areas in the world, including the USA, Canada, Brazil, India, Chile, Nigeria, Ghana, Italy, etc. We will continue providing high quality products and better services for our customers, and welcome you to visit our company and establish good business relationships with us.

Equipment Production Parameters By Chongqing Dongchong Aluminum Co.,Ltd
1650mm Slitting machine	Uncoil(MM)				Finished size(MM)		Slitting Width(MM)
	ID	OD	Width	Thickness	ID	OD	Above 0.5mm≥ 20mm
	Φ 400	≤ 1800	≤ 1600	0.5-4.5	Φ 400	≤ 1700(normal)
	Φ 500				Φ500(normal)
	Φ 600
Aluminum foil Slitting machine	Uncoil(mm)				Finished size(MM)
	ID	OD	Width	Thickness	ID	OD	Width
	Φ 76	≤ 550	≤ 1200	0.08-0.12	Φ76Φ76	≤ 550(normal)
1450mm Crosscutting machine	Uncoil(MM)				Finished size(MM)
	ID	OD	Width	Thickness	ID	OD	Width
	Φ 505	≤ 1780	≤ 600	0.1-1.5	Φ150 Φ300 Φ400 Φ500	≤ 1700(normal)	6-600
	Φ 605
Annealling Furnace	Furnace Temperature		Furnace Size
	≤440°C		320020002100
Saw Cutting	Thickness(mm)		Width (mm)			Length (mm)
	Size		Size		Tolerance	Size
	≤200		≤2000		±0.3	≤3000
Embossing Machine	Type	Thickness(MM)	Width(MM)	Embossing height(MM)	Tolerance(MM)	Type	Thickness(MM)