Home Companies BEST PIPELINE EQUIPMENT CO.,LTD

1.4539 Flange En 1092 1 Type 01 Slip On Steel Plate Flange

Contact Us

[China]

Trade Verify

Address: China Factory : Suzhou Industrial Park, JiangSu Province,China

Contact name:amy

BEST PIPELINE EQUIPMENT CO.,LTD

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

1.4539 Flange En 1092 1 Type 01 Slip On Steel Plate Flange

Country/Region	china
City & Province	suzhou jiangsu
Categories	Flanges

Product Details

1.4539 Flansche/flanges EN1092-1 Type 01 Plate Flange

Grade :

X1NiCrMoCu25-20-5

Number:

1.4539

Classification:

Austenitic stainless steel

Density:

8 g/cm ³

Standard:

EN 10088-2: 2005 Stainless steels. Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes

EN 10088-3: 2005 Stainless steels. Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes

EN 10028-7: 2007 Flat products made of steels for pressure purposes. Stainless steels

EN 10216-5: 2014 Seamless steel tubes for pressure purposes. Technical delivery conditions. Stainless steel tubes

EN 10217-7: 2005 Welded steel tubes for pressure purposes. Stainless steel tubes

EN 10296-2: 2005 Welded circular steel tubes for mechanical and general engineering purposes. Stainless steel. Technical delivery conditions

EN 10253-3: 2008 Butt-welding pipe fittings. Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements

EN 10253-4: 2008 Butt-welding pipe fittings. Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements

EN 10272: 2007 Stainless steel bars for pressure purposes

EN 10250-4: 2000 Open steel die forgings for general engineering purposes. Stainless steels

EN 10297-2: 2005 Seamless circular steel tubes for mechanical and general engineering purposes. Stainless steel. Technical delivery conditions

EN 10088-1: 2005 Stainless steels. List of stainless steels

EN 10088-5: 2009 Stainless steels. Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes

EN 10088-4: 2009 Stainless steels. Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes

1.4539 Flansche/flanges EN1092-1 Type 01 Plate Flange Chemical composition % of steel X1NiCrMoCu25-20-5 (1.4539): EN 10088-2-2005

Elements not listed in this table shall not be intentionally added to the steel without the agreement of the purchaser except for finishing the cast.

C	Si	Mn	Ni	P	S	Cr	Mo	N	Cu
max 0.02	max 0.7	max 2	24 - 26	max 0.03	max 0.01	19 - 21	4 - 5	max 0.15	1.2 - 2

1.4539 Flansche/flanges EN1092-1 Type 01 Plate Flange Mechanical properties of steel X1NiCrMoCu25-20-5 (1.4539)


Rm - Tensile strength (MPa) (+A)	520-730


Rm - Tensile strength (MPa) (+AT)	520-720


R_p0.2 0.2% proof strength (MPa) (+AT)	220-230


R_p0.2 0.2% proof strength (MPa) (+A)	220-260


KV - Impact energy (J) transverse, (+A)	+20° 60	-196° 60


KV - Impact energy (J) longitud., (+A)	+20° 100


KV - Impact energy (J) transverse, (+AT)	+20° 90	-196° 60


KV - Impact energy (J) longitud., (+AT)	+20° 120


A - Min. elongation at fracture (%) (+A)	30-35


A - Min. elongation at fracture (%) transverse, (+AT)	30


A - Min. elongation at fracture (%) longitud., (+AT)	35

Brinell hardness (HB): (+A)	230
Brinell hardness (HB): (+AT)	220

1.4539 Flansche/flanges EN1092-1 Type 01 Plate Flange Properties of steel X1NiCrMoCu25-20-5 (1.4539)

Resistance to intergranular corrosion: in the delivery condition - yes; in the sensitized condition - yes
Steel shal not be applied at a metal temperature lower than -196 ° C

1.4539 Flansche/flanges EN1092-1 Equivalent grades of steel X1NiCrMoCu25-20-5 (1.4539)

EU
EN

USA
-

France
AFNOR

England
BS

Sweden
SS

Poland
PN

X1NiCrMoCu25-20-5

904L

N08904

Z2NCDU25-20

904S13