Results for150n mandrel test apparatusfrom 3300 Products.
|
IEC 60884-1 Figure 21 Apparatus for Flexing Test of Plug Socket-outlet Flexible Cable Product information: The flexible cable flexibility test apparatus meets the requirements of ...
|
|
|
|
This apparatus is used to test the soil density by sand replacement method. The soil particle max size normally not over than 15mm, the test soil layer thickness is 150-200mm. when ...
|
|
|
|
IEC60695 Flammability Testing Equipment Horizontal And Vertical Burning Test Apparatus PLC Control 7 Inch Color Products information This flammability tester simulate the influence ...
|
|
|
|
IEC62196-1 Electric Vehicle Plugs and Connectors Cable Pull and Torque Test Apparatus Complied Standards & Clauses IEC 62196-1 Ed.4CDV 2020 clause 25.3 Figure 17 and table 11, ...
|
|
|
|
EN ISO 1182 Micro-computer Building Non-Combustibility Test Apparatus Application: Suitable for determining whether the building materials flammability test under specified ...
|
|
|
|
IEC 62196 Vehicle Drive Over Testing Apparatus For Charging Plug Product information: The test equipment is used to check whether a plug or vehicle connector shall have adequate ...
|
|
|
|
HS-4S Digital Automatic Concrete Impervious Testing Apparatus Model: HS-4S Description This tester is used to test the concrete impervious ability, it’s widely used in construction ...
|
|
|
|
UL817 Cable Testing Equipment Abrupt Pull Test Apparatus With 6 Working Stations UL817: 96.4 Each molded-on representative device is to be secured in the jaws of the flexing ...
|
|
|
|
IEC 62368-1 Clause Y.5 IPX3 to IPX6 Water Spray Test Apparatus Product information: The testing system is required by IEC 62368-1:2018 clause Y.5, etc. It is used to verify the ...
|
|
|
|
JC/T517-2004 Cement / Mortar / Lime Water Retention Test Apparatus Model: BS-2 Standards: JC/T517-2004 Description This tester can test the water retention of lime, cement, mortar. ...
|
|
|
|
IEC 60898-1Testing Equipment Circuit-breakers Tripping Characteristic Test Apparatus Product Introduction: The circuit breaker thermal trip tester complies with IEC 60898-1. It is ...
|
|
|
|
IEC60335-2-21 2.5Mpa Constant Pressure Water Supply Test Device Applied standard and clauses: This hydraulic pressure test apparatus is required by IEC 60335-2-5 cl.22.101,IEC ...
|
|
|
|
Horizontal Vertical Flame Chamber Tester With Touch Screen Products information: The series of horizontal-vertical flame test apparatus are designed and manufactured according to ...
|
|
|
|
IEC 60309-1 Plugs And Vehicle Connectors Cable Anchorage Pull Force And Torque Test Apparatus Product information: This pull force and torque test equipment is used to test the ...
|
|
|
|
IEC60065:2014 clause14.1 Horizontal-vertical Flame Test Apparatus HVF-3 Standard: Conforms to IEC60065:2014 clause 14.1, 20.2.1, 20.2.4, Annex G, UL94,IEC60695-11-2, IEC60695-11-3, ...
|
|
|
|
IEC 60598-1 Luminaries Adjusting Devices 360° Movement PLC Control Test Apparatus Product information: The test equipment is designed and manufactured according to clause 4.14.3 of ...
|
|
|
|
BS EN 12983-1 Pencil Hardness Test Apparatus For Exterior Organic Coatings Test Scratch Resistance Product overview: The equipment is complied with BS EN 12983-1 clause 8.4.2 ,8.4...
|
|
|
|
Insulation Surface Scratch Resistance Test Apparatus For Test Household Appliances IEC 60335-1 Product information The device is used to check abrasion strength of printed circuit ...
|
|
|
|
BS EN 12983-1 Cookware Handle Bending Strength Test Apparatus Product information: It is used to perform fatigue resistance test on cookware handles. The handle assembly should ...
|
|
|
|
Insulation Surface Scratch Resistance Test Apparatus PLC Control Product overview: Insulation Surface Abrasion Resistance Testing Equipment SN1106 A specimen, such as a solutely ...
|
|
|
You may also be interested in :