Home Companies Guangzhou HongCe Equipment Co., Ltd.

UL817 Cable Testing Equipment Abrupt Pull Test Apparatus With 6 Working Stations

Guangzhou HongCe Equipment Co., Ltd.

Contact Us

[China] country

Trade Verify

Address: Room 202, Building 4-2, No. 539, Shibei Industrial Road, Dashi Street, Panyu District, Guangzhou, Guangdong

Contact name:Tessa Huang

Inquir Now

Guangzhou HongCe Equipment Co., Ltd.

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

UL817 Cable Testing Equipment Abrupt Pull Test Apparatus With 6 Working Stations

Country/Region china
City & Province guangzhou guangdong
Categories General Industrial Equipment Design Services
InquireNow

Product Details

UL817 Cable Testing Equipment Abrupt Pull Test Apparatus With 6 Working Stations

 

UL817:

96.4 Each molded-on representative device is to be secured in the jaws of the flexing machine so that the point of cord exit is at the center of rotation. The rotating jaws are to be adjusted to rotate to an angle of 90° to each side of the centered position. At the centered position, the cord is to hang vertically and the weight, selected in accordance with 96.3, attached to each cord approximately 1 2 inches (305 mm) from the point of rotation. See Figure 96.1 .
96.5 Each representative device is to be subjected to complete flexing cycles until a conductor in each device has opened (as determined by a continuously-monitoring detection circuit), or until 2,500 cycles is reached, whichever comes first. A flexing cycle consists of: rotation of the jaws from the vertical (centered) position until 90° to one side, back past the vertical position until 90° to the other side, and back to the vertical (centered) position. The rate of testing shall be 1 0 cycles per minute.

 

Description:

This device is used for the resistance abrupt pull test of Plug of plug power line, torsion test, load test and grounding current test.

According to the standard UL817 clause 96.4-96.5 Flexing test, clause 99.1-99.2 Abrupt Pull Test, clause 100.1-100.3 Jacket retention test.

 

Test sample: Plug power line.

 

Feature: Using automatic mode test, it will automatic shutdown when reach to the setting number if test times or setting time.

 

Technical parameters:

Power supplyAC 220V 50Hz
Load current0~40A , Arbitrary adjustable
Load voltage4~12V
Working station6 stations
Test times1~9999 times, can be preset
Test time0.1~999.9S
Load weight2.5 pound(lb) , 3 pound(lb) , 15 pound(lb) 6 pcs per each
Ambient temperature0~40℃
Ambient humidityless than 85%Rh
Reference standard

UL817 clause 96.4-96.5 Flexing test,

clause 99.1-99.2 Abrupt Pull Test,

clause 100.1-100.3 Jacket retention test

 

Hot Products

Stainless Steel Inner Wall IEC Test Equipment 8 - 20 Times/Hour Air Changes IEC Description: The ...
48rpm Label Marking Abrasion Test Machine 220VAC 50Hz Markings Durability Tester Abrasion Test ...
GB/T531-1999 Digital Shore Hardness Gauge Measuring Range 0~100HD IEC 60335-2-80 Clause 20 stability ...
IEC60990 Figure 4 Touch Current Measuring Network Convenient Products Introduction: This test ...
Thermal Ageing Oven IEC 60811 Testing Equipment Air Changes Rate 5-20 Times Per Hour Thermal Ageing ...
IEC 60228 Conductor resistance meter Product Introduction: CXT2510 Ultra low DC resistance tester is ...