Active Member
|
[China]
Address: Room1421 . Greenland Business Building LOFT C. , new urban district , Xuzhou , Jiangsu
Contact name:Li
Xuzhou Yahong CNC Equipment Factory |
|
|
Single Table Fiber Laser Cutter , CNC Laser Metal Cutting Machine Wavelength 1070 Nm
Product introduction:
YH3015-500 fiber laser cutting machine is the finalize the design product, maximum cutting ability, carbon steel plate up to 6mm,and quality cutting 6mm, and 2mm stainless steel plate; double driving structure of the longitudinal direction with pinion and rack, and also transverse direction with gear and rack transmission.
Optical fiber laser as the fourth generation of laser technology, has superior performance like long life, good flexible, low power consumption, free of maintenance, easy integration and so on ,being widely used in laser cutting, which is recognized as the most stable in the global performance .
Applicable materials: professional used to cut thin sheet metal, in a variety of high-quality cutting 0.5 ~ 10mm carbon steel sheet, 0.5 ~ 4mm stainless steel plate, can also be cutting aluminum alloy plate, galvanized sheet, electrolytic plate, silicon steel, titanium alloy, aluminum zinc plate and other metal materials.
Technical indicators:
1. Machine tool technology parameters
| Items | Technical parameters | |
| Max cutting size (mm) | 3000×1500 | |
| The workpiece maximum height (mm) | 90 | |
| Effective travel | X axle(mm) | 1550 |
| Y axle (mm) | 3050 | |
| Z axle (mm) | 100 | |
| PositionaI accuracy | X axle (mm/m) | ±0.05/1000 |
| Y axle (mm/m) | ±0.05/1000 | |
| Z axle (mm/m) | ±0.01/100 | |
| repeated positioning accuracy | X axle (mm) | ±0.01 |
| Y axle (mm) | ±0.01 | |
| Z axle (mm) | ±0.005 | |
| Rapid positioning speed | X axle (m/min) | 72 |
| Y axle (m/min) | 72 | |
| Z axle (m/min) | 15 | |
| Max Cutting Speed (m/min) | 15 | |
| IP Grade | IP54 | |
| Total weight (T) | 4.35 | |
| Machine Power Consumption (Kwh) | 1.6 | |
| Boundary dimension L×W×H(mm) | 4191×2520×1326 | |
2. Laser & process parameters
| Items | Technical parameters | |
| working mode | Continuous/modulation | |
| Laser power(W) | 500 | |
| Laser wavelength (nm) | 1070 | |
| The maximum modulation frequency (KHz) | 5 | |
| laser mode | Multi mode | |
| Optical quality (M2) | 2.2mm*mrad | |
| Power adjust range (%) | 5-100 | |
| Fiber Length (m) | 10m | |
| Type of cooling | water-cooling | |
| Operating temperature (℃) | 10-40 | |
| Long-term stability (24h) | ﹤2% | |
| Laser life(h) | 100000 | |
| maximum cutting thickness | MS (mm) | 12 |
| SS(mm) | 4 | |
| cutting speed (1mm MS) | 15m/min | |
| Focal length F(mm) | 150 | |
| Adjustable focus range (mm) | 0-10 | |
| Overall Power Consumption (Kwh) | 4 | |
Fiber Laser IPG- YLS-500:
YLS-500w series laser of IPG is a new generation of near infrared spectral range (1060 ~ 1080 nm) semiconductor pump single-mode continuous ytterbium doped fiber laser system, it has high power, the ideal high beam quality, optical fiber transmission and electro-optic conversion efficiency .The laser system has incomparable and high reliability comparing to various solid state laser and gas laser, its advantages are: wide range of wavelength selection, extremely low signal-to-noise ratio, high stability and long life of the pump sources are used.
Main features:
Cutting Sample:
