Active Member
|
[China]
Address: Room1421 . Greenland Business Building LOFT C. , new urban district , Xuzhou , Jiangsu
Contact name:Li
Xuzhou Yahong CNC Equipment Factory |
|
|
IP54 Protective Grade CNC Fiber Laser Cutter IPG Type YH3015 Single Table
Product introduction:
Optical fiber laser as the fourth generation of laser technology, has superior performance like long life, good flexible, low power consumption, free of maintenance, easy integration and so on ,being widely used in laser cutting, which is recognized as the most stable in the global performance .
YH3015-500 fiber laser cutting machine is the finalize the design product, maximum cutting ability, carbon steel plate up to 12mm,and quality cutting 10mm, and 4mm stainless steel plate; double driving structure of the longitudinal direction with pinion and rack, and also transverse direction with gear and rack transmission, with today's most advanced fiber laser as a laser power source, combined with the company’s independent research and development design, the manufacture of gantry CNC machine tools, high strength the overall welding fuselage, after two high temperature annealing, large CNC gantry milling machine precision machining; Has the very good rigidity and stability; With high response servo motor, high precision, high speed; Fiber lasers with high beam quality, high brightness, high conversion rate, free maintenance, stable and reliable, low cost and small volume and a series of advantages, is the first selection of sheet of processing equipment.
Basic configration:
| No. | Description | Brand | Origin |
| 1 | Machine main body | Yahong | China |
| 2 | CNC operationg carbinet | Yahong | China |
| 3 | Smoke dust sucking structure | Yahong | China |
| 4 | air conditioning cabinet | Yahong | China |
| 5 | Fiber Laser | IPG-1000W | America |
| 6 | optical module | Import | America |
| 7 | Conductive fiber | Import | America |
| 8 | QBH connector | Import | America |
| 9 | Laser cutting head | RayToolAG | Swiss |
| 10 | laser chiller | Han’s | China |
| 11 | CNC system | Baichu | China |
| 12 | Capacitive THC | Baichu | China |
| 13 | Servo motor | Fuji | Japan |
| 14 | IPC | ADVANTECH | Taiwan |
| 15 | Gear rack | YYC/ Level 6 precision | Taiwan |
| 16 | Linear Guide | Bosch Rexroth | Germany |
| 17 | Precision reducer | Shimpo/3 Arc-min | Japan |
| 18 | Proportional valve | SMC | Japan |
| 19 | high-pressure valve | ARK | Korea |
| 20 | Electronic pieces | Schneider | France |
| 21 | Solenoid valve | SMC | Japan |
| 22 | Air cylinder | AirTAC | Korea |
| 23 | Air Conditioner | WINHENG | China |
| 24 | Cutting software | Baichu | China |
| 25 | Composing software | SmartNest | China |
Technical indicators:
1. Machine tool technology parameters
| Items | Technical parameters | |
| Max cutting size (mm) | 3000×1500 | |
| The workpiece maximum height (mm) | 90 | |
| Effective travel | X axle(mm) | 3050 |
| Y axle (mm) | 1550 | |
| Z axle (mm) | 100 | |
| PositionaI accuracy | X axle (mm/m) | ±0.05/1000 |
| Y axle (mm/m) | ±0.05/1000 | |
| Z axle (mm/m) | ±0.01/100 | |
| repeated positioning accuracy | X axle (mm) | ±0.01 |
| Y axle (mm) | ±0.01 | |
| Z axle (mm) | ±0.005 | |
| Rapid positioning speed | X axle (m/min) | 72 |
| Y axle (m/min) | 72 | |
| Z axle (m/min) | 15 | |
| Max Cutting Speed (m/min) | 15 | |
| IP Grade | IP54 | |
| Total weight (T) | 4.35 | |
| Machine Power Consumption (Kwh) | 4.8 | |
| boundary dimension L×W×H(mm) | 4216×2165×1450 | |
2. Laser & process parameters
| Items | Technical parameters | |
| working mode | Continuous/modulation | |
| Laser power(W) | 500 | |
| Laser wavelength (nm) | 1070 | |
| The maximum modulation frequency (KHz) | 5 | |
| laser mode | Multi mode | |
| Optical quality (M2) | 2.2mm*mrad | |
| Power adjust range (%) | 5-100 | |
| Fiber Length (m) | 10m | |
| Type of cooling | water-cooling | |
| Operating temperature (℃) | 10-40 | |
| Long-term stability (24h) | ﹤2% | |
| Laser life(h) | 100000 | |
| maximum cutting thickness | MS (mm) | 6 |
| SS(mm) | 2 | |
| cutting speed (1mm MS) | 15m/min | |
| Focal length F(mm) | 150 | |
| Adjustable focus range (mm) | 0-10 | |
| Overall Power Consumption (Kwh) | 4 | |
Main features:
1. photoelectric conversion efficiency can reach 30%, two times that of CO2.
2. less consumption of power source, CO2 is 20% ~ 30%;
3. no laser working gas, can save a lot of laser maintenance cost;
4. optical fiber transmission, without reflection lens, do not need to adjust the light path.
Packing:
lining--anti-static film package firstly, waterproof, moistureproof.
Intermediate--around the perimeter of the box, there is bubble.
Outer--export standard packing, fumigation-free plywood.
Fiber Laser Cutting Machine:
