TANGSHAN YIFEI TRADING CO.,LTD |
|
High efficiency narrow seam mould for continuous casting machine
Main technical parameters:
Water seam (mm): 5-8
Length of pipe (mm): 812, 850, 900, 1000
Model: R4-12 m arc
Specification: 60-200 square billet, 100-300 round billet
Copper tube material: phosphorus deoxidized copper
Mould is the core equipment of continuous casting machine. It is
the initial casting of molten steel to meet the requirements of the
quality of the billet and the production of key equipment can be
carried out smoothly.
Mould to undertake the molten steel injected from the tundish and
make it according to the provisions of the section shape solidified
into a solid shell.
It is the most critical part of the continuous casting machine, the
structure, material and performance parameters plays a key role of
the slab quality and casting machine production.
When pouring steel start, the head of the dummy bar is the movable
insole of the mould. When the molten steel is poured into the
mould, it gradually condenses to a certain thickness and is
continuously drawn out. At this moment, the inner wall of the mould
is subjected to the static pressure of molten steel and the blank
The relative movement of the shell friction and other mechanical
and thermal stress caused by the combined effect, its working
conditions is extremely poor.
In order to obtain qualified billet, mould should meet the basic
conditions
(1) with good thermal conductivity, so that the rapid condensation
of molten steel forming.
(2) Good wear resistance, to extend the life of the mould, reduce
maintenance workload and replace the mould time, improve the
caster's operating rate.
(3) Adequate rigidity, especially in the case of chills and heat,
with small temperature gradients.
(4) The structure is simple, compact, easy to manufacture, easy to
assemble and disassemble, easy to adjust, and the cooling water
channel can be connected by itself for quick replacement; the
weight is small, so as to reduce the inertia force during mould
vibration and reduce the driving power of the vibration, and the
mould vibration smooth.
Type | Narrow seam |
Water seam | 5-8mm |
Length of pipe | 812/850/900/1000mm |
CCM radius | R2.5-R12 |
Square billet | 60-200mm |
Round billet | 100-300mm |
copper tube material | TP2 |