TANGSHAN YIFEI TRADING CO.,LTD |
|
Low voltage and high current high frequency soft switching power
supply
Product introduction:
The TL16-6.0KW-A1300S type power supply is used to drive 3KW
microwave magnetron. It can replace high-voltage DC power supply
composed of high-voltage transformer, high-voltage capacitor and
high voltage diode and high voltage silicon stack, and has the
advantages of high efficiency, high reliability, wide voltage input
and stable output power.
Main features:
(1) High efficiency:
The efficiency is more than 95%, in the state of quasi sine line
voltage of AC/DC rectifier output by 5% to 100% from the bus
voltage range, the electronic switch LLC converter, zero voltage
switching state voltage range (soft switching function), and a set
of AC/DC converter can realize PFC function.
(2) Long life and high reliability:
The full power range LLC resonant converter and its control method
are used to produce the power module. The main loop of the power
changer has no electrolytic capacitor, and the power converter is
semi permanent, which ensures the long life of the power supply.
The use of high voltage inverter power supply is not afraid of high
voltage short circuit, the annual failure rate of the frequency
conversion power supply is less than 1%, and the service cost is
very low.
(3) Low electromagnetic interference:
The LLC resonant converter greatly reduces the electromagnetic
interference and adapts to the intense change of the voltage of the
power grid.
(4) The heating power is continuously adjustable:
The transformer can not adjust the power according to the
requirements of the heating work, which is the most headaches in
the engineering equipment, which affects the product yield. LLC
resonant converter with adjustable range is 5%-100%, easily solve
the problem to adjust the output power.
(5) Hot plug function (direct operation of the system). The module
of frequency conversion power is designed. The terminal customers
only need to pull the damaged power away from the power
distribution cabinet, and plug the new power to complete the
replacement.
(6) The module has high voltage parallel current sharing
technology.
It is easy to achieve power lifting and can be directly operated in
parallel with full power.
(7) The three phase no middle line AC input, simplifying the system
design, eliminating the risk of excessive middle line current.
Product quality: industrial grade.
Application: Power supply for lithium ion batteries pre-formation equipment.
Electric automobile industrial welding machine industry
Input power limit | 10 KW |
Rated input voltage/current | Three-phase AC380V+/-15% 14A |
Power Factor | >0.96 |
Conversion efficiency | >86% (>93%) |
Rated output voltage | 13V (48V) |
Ripple | ≤40mv (120mv) |
Rated output current | 700A |
Output current adjustment range | 0A-700A |
Inverter | LLC/PWM |
Operating ambient temperature | -20℃ ~ +45℃ |
Back panel interface | 1. AC input (three-phase four -wire system) 2. DC output: Terminal output |
Cooling | 1)2 pcs adjustable temperature cooling fan:80×80mm 2)front panel inlet and back panel outlet |
Design life time | 30,000h |
Overall size and weight | Weight:11.00kg 489 (L)×330(W)×142 (h)mm |
Quality assurance | One year warranty |
Version and manufacturing date | Version 2017 showed on power supply housing |