Wireless Smart Irrigation Controller Latching Valve 5km Pump Wireless Control Solar Supply

Wireless Smart Irrigation Controller Latching Valve 5km Pump Wireless Control Solar Supply

General introduction:

Automated irrigation becomes a trend with the development of smart agriculture. In order to send appropriate amount water in proper time to your farmland, we design this wireless irrigation system. It will help you Start/OFF your solenoid valves on site wirelessly. Users can control different valves on site at the control center easily. No need to go field, run here and there to control each valves manually one by one. This wireless control system will really help you save a lot of time.

System includes

1. Master controller at Control center--to connect Hunter/Toro irrigation controller

2. Pump controller at pump station--to control pump ON/OFF

3. Solenoid valve controller at field--each controller connects 4 valves

Features

1. Base station expandable

The main controller has 8 stations. We also provide 8-station expander in order to connect 16 or 24 or 36 or 48 stations irrigation controller.

2. Valve controller support solar power supply

Field valve controller has 4 port. Each one can connect 4 valves (1 station controller or 2 station controller also available). Valve controller use solar power supply. It already has solar supply circuit on board.

3. Pump ON-OFF automatically

Our pump controller turns pump on automatically if any one of the solenoid valve is ON, switch off the pump if no valve is ON automatically.

4. Base station automatically controls valves

You can automatically switch on any solenoid valve according the scheduled irrigation controller’s program.

5. Wireless connection

No need to operate pump and valve manually. Can do all at control room. No need to run here and there any more. Save time and energy.

6. Can check feedback from flow sensor (customize)

According flow sensor’s digital/analog input, we can check each connected valve’s condition

7. Control distance around 5km at open area, no communication fee.

Benefits

• Lower labor costs
• Increase accuracy (e.g. smaller more frequent sets)
• Reduce water use (e.g. by night irrigation)
• Irrigating multiple, large, and/or remote properties can be very labor intensive. In addition, it is often difficult to know exactly when (or if) valves were activated, and whether or not the desired duration or amount of water distribution was achieved. Furthermore, in instances where immediate response is required, manual valve activation may not be an option.

Parameter

How to connect master controller

About main controller’s DIP switch definition

How to connect expander

About Expander’s DIP switch definition

How to connect main pump

Pump controller DIP switch definition

How to connect valve controller

Conclusion:

• Please make sure all controllers in the same system setting with the same channel
• One master to more slaves, please set different ID for slaves(valve controller)
• Master side all COM- ports connect with irrigation controller’s C port