Nanjing Movelaser Co., Ltd. |
Verified Suppliers
|
|
Filtering out interference, high repetition rate laser pulses, effective detection range of 300 meters
| Product introduction
The clearance of the wind turbine tower is the closest distance between the blade tip of the unit and the tower wall at the height of the blade tip. With the development of wind turbine technology and the improvement of energy efficiency requirements, wind turbine blades are becoming longer and more flexible. At the same time, due to the complex geographical environment and wind conditions of wind turbine locations, or due to complex meteorological conditions such as cold currents and typhoons, wind turbine blades have the risk of tower sweeping. After tower sweeping, the blades may be replaced, or in severe cases, the entire unit may be scrapped, which will bring huge economic and property losses.
| Application scenarios
In order to meet the specialized needs of wind turbine tower
clearance monitoring and improve the practical application in this
specific field
Usability, data reliability, and environmental adaptability,
MolasCL is equipped with three beam ranging and a set of dedicated
computers
Method, including filtering out strong light (sunlight)
interference, filtering out rain, snow, sand and dust interference,
identifying fog interference, andThick fog recognition and other
functions, combined with the high repetition rate advantage of
MolasCL laser pulses and its high-performance computing platform .
The advantages of high-throughput data processing can greatly
improve data efficiency, reduce false alarm rates, and maintain
high accuracy
Timeliness helps the wind turbine control to react quickly and
avoid affecting power generation due to false alarms, making it
more effective than
Ordinary ranging radar has incomparable advantages
| Product parameters
Ranging index | |
Ranging method | 1ToF |
Detection distance | 200m@90% reflectivity/ 140m@10% reflectivity |
Range resolution | ≤0.1m |
Measurement accuracy | ±0.2m |
Repeated measurement accuracy | ±0.2m |
Resistance to ambient light | 100Klux |
Optical index | |
Wavelength | 905nm |
Repeat frequency | 20KHz per channel |
Laser safety level | Class 1 |
Environmental adaptability | |
Range of working temperature | -40℃~+60℃ |
Survival temperature range | -45℃~+65℃ |
Working humidity range | 0%~100% RH |
Enclosure rating | IP65 (or according to specific needs) |
Working acceleration range | -0.5g ~ 0.5g |
| Product Features
MolasCL can only be used for clearance measurement in engine room
installation, and can be installed at any position inside or below
the fan hood by opening holes Thread the laser beam out of the
cabin cover or install it outside the cabin cover. Through the
calibration process, the radar laser beam forms an inclination
angle towards the impeller surface, causing excitation
The beam of light is located at the lowest point of the impeller
(blade tip height) at the desired monitoring clearance point. When
the blade is running, bending towards the tower side, or touching
the beam of light, the radar will The radial distance between
the blades can be measured, and the clearance value can be
calculated using a certain inversion algorithm.
| Product Image