Active Member
|
[China]
Address: No. 10-1, Lane 7, Xuewuxin Village, Jinsha Community, Kengzi Street, Pingshan District, Shenzhen, Guangdong, China
Contact name:Yilia
Shenzhen UTOP Technology Co., Ltd. |
|
|
FTTH GPON EPON ONU 1port 1.25G/2.5G 1310nmTX/1490nmRX 20km SC ONU ONT
Description
Our this single-user ONU is designed for ONU in deferent FTTH solutions. The carrier-class FTTH application provides date service access. it adopts high-performance and low-consumption chips, and supports CTC V2.0 interconnection and interworking standard of China Telecom. With the help of NGBN View NMS, it can provide subscribers with abundant services, and totally meet the needs of carrierclass FTTH devices.This product is designed by ZTE chipset.
Features:
Hardware Technical
| Item | Parameter |
| PON Interface | 1GE PON optical interface Meet Class B+ standard Upstream 1.244Gbps, downstream 2.488Gbps SC-UPC single-mode ber(or APC) Split ratio 1:128 Transmission distance: 20km |
| User Ethernet Interface | 1*10/100/1000M auto-negotiation Full/half duplex mode RJ45 connector 100m distance |
| Power Interface | 12V DC power supply |
| PON Optical Parameter | Wavelength: TX 1310nm, RX1490nm TX Optical Power: 0.5~+5dBm RX Sensitivity: -27dBm Saturation Optical Power: -8dBm Connector Type: SC Optical Fiber: 9/125μm single-mode ber |
| Transmission Parameter | Packet Loss Ratio<1*10E-12 Latency<1.5ms |
| Gateway | Router mode supports PPPoE / DHCP/ static IP WAN support Router and Bridge mode WAN support Internet LAN supports DHCP and static IP Support NAT and NAPT |
| Business Capability | Layer 2 wire speed switching Support VLAN TAG/UNTAG, VLAN conversion Support Port-based speed limitation Support Priority classication Support storm control of broadcast |
| Management mode | Support ITU-T G.984 OMCI, ONU can be remotely managed by OLT Support Remote management through Telnet or HTTP Local management |
| Management function | Status monitor, Conguration management, Alarm management, Log management |
| Physical Features | Shell: Plastic casing Power: External 12V 0.5A AC/DC power supply adapter Power consumption<2W(FD101HC), <2.3W(FD111HC) Item Dimension: 75mm(L) x 75mm(W) x 28mm (H) Item weight: 50g |
| Environmental Specications | Operating temperature: -20 to 70 Storage temperature: -40 to 85 Operation humidity: 10% to 90%(Non-condensing) Storage humidity: 10% to 90%(Non-condensing) |
LED Indicators
| LED | Description |
| PWR | The device is powered up or down. |
| LOS | Optical link status. |
| PON | ONU registered. |
| LINK/ACT | Link status of Ethernet Interface |
Ordering models:
| Model | PON port (SC UPC/APC) | User end | WiFi | Power Supply |
| UT10E | 1*XPON | MICRO ONU EPON/GPON/XPON 1X10/100/1000Mbps RJ45+1SC/UPC TX:1310nm/RX:1490nm 20km | _ | _ |
| UT610E | 1*XPON | 1*GE | _ | DC12V 1A |
| UT610EC | 1*XPON | 1*GE+1*CATV | _ | DC12V 1A |
| UT611EP | 1*XPON | 1*GE+1*FE+1*POTS | _ | DC12V 1A |
| UT611E-X | 1*XPON | 1*2.5GE+1*GE | _ | DC12V 1A |
| UT613EC | 1*XPON | 1*GE+3*FE+1CATV | _ | DC12V 1A |
| UT613ECP | 1*XPON | 1*GE+3*FE+1CATV+1*POTS | _ | DC12V 1A |
| UT613E | 1*XPON | 1*GE+3*FE(3GE) | _ | DC12V 1A |
| UT811W | 1*XPON | 1*GE+1*FE+WiFi | 2.4GHZ | DC12V 1A |
| UT811WC | 1*XPON | 1*GE+1*FE+WiFi+CATV | 2.4GHZ | DC12V 1A |
| UT813W | 1*XPON | 1*GE+3*FE+WiFi | 2.4GHZ | DC12V 1A |
| UT813WC | 1*XPON | 1*GE+3*FE+WiFi+CATV | 2.4GHZ | DC12V 1A |
| UT813WP | 1*XPON | 1*GE+3*FE+POTS+WiFi | 2.4GHZ | DC12V 1A |
| UT820W | 1*XPON | 2*GE+WiFi | 2.4G/5.8GHZ | DC12V 1A |
| UT820WC | 1*XPON | 2*GE+WiFi+CATV | 2.4G/5.8GHZ | DC12V 1A |
| UT840W | 1*XPON | 4*GE+WiFi | 2.4G/5.8GHZ | DC12V 1A |
| UT840WC | 1*XPON | 4*GE+WiFi+CATV | 2.4G/5.8GHZ | DC12V 1A |
| UT840WCP | 1*XPON | 4*GE+WiFi+CATV+POTS | 2.4G/5.8GHZ | DC12V 1A |
| UT840WPU | 1*XPON | 4*GE+WiFi+POTS+1USB | 2.4G/5.8GHZ | DC12V 1A |
| UT840WCPU | 1*XPON | 4*GE+WiFi+CATV+POTS+1USB | 2.4G/5.8GHZ | DC12V 1A |
Product pictures:
