Active Member
|
[China]
Address: No.300 zhongshan east road,Changfa Center CFC-A 907, Nanjing,Jiangsu,210001.P.R.China
Contact name:
Jaili Machinery Co., Ltd. |
|
|
50 ton Electric Chain Hoist With Wireless Remote Control, Overload Limiter, Imported Load Chain
TXK Electric Chain Hoists are a hard working and durable hoists. All hoists are constructed with load supporting frames, mechanical brake which together with the motor brake provides a dual braking system to assure safety during operation. The housing is from an aluminum alloy and is light weight while providing good heat dissipation. the fully enclosed design makes this hoist suitable for applications in Foundries, Brick Yards, Abbatoirs …etc. The motor will not run if the unit is incorrectly wired. limits switch to avoid the overwinding of the chain. The control voltage is 48V to help prevent personal injury that can be cause by a current leakage of the push button control. The hook is forged in extreme heat to ensure strength and toughness. The Bottom hook swivels 360 degrees. Both the Top hook and bottom hook have safety catches. All ProSTAR Elect Chain Hoists come with overload slipping clutches to maximize safety during operation.
| clutch | As emergency overload protection,Clutch will functions and motor will slip when abnormal load |
| Cooling fan | Cooling fan prevent motor over heat when long time continuous usage.Hollowed-out fan cover and cooling fin not only enhance fan heat dissipation capacity,but make fan operated more quietly. |
| Limit switch without guide frame | No guide frame ensures hoist lift and drag the weight diagonally. |
| The shell | Except for connecting case,all other parts hoist body adopt aluminum,light weight,but exceptional rigidity,as well as high dust-protection and water-protection |
| Side magnetic braking device | The magnetic force generator is the latest design which is featured for generating magnetic force.It allows instant brake as soon as the electric power is cut off.Thus the braking safety while loading is guaranteed. |
| Dual speeds hoist adopt built-in inverter | Adopt built-in inverter to make hoist in Dual speeds will reduces swing in operation,helps hoist start steadily and stop slowly.The speed ratio can be adjusted,the standard speed ratio is 4:1,if special requirement,please inform when inquiry. |
| Antiphase protector | Advatages : When power-supply wiring mistake, the control circuit is unable to move to protect motor from being berned. |
| Hooks | It is hot forging with perfect strength that is hard to break.The operation safety of the lower hook is ensured by its 360 degrees rotation and safety tongue piece |
| Chain | High grade :It is import Japanese chain ultra strong heat treatment alloy steel. Advatages: It is safely approximately when used in the rain water, the sea water, under the chemical and other bad conditions. |
| Hand switch | An ergonomic shape design ensures hand switch operated friendly.The button with a light soft operating sensation satisfied the operator not fatigued after a long period operation |
| ISO | M4 /FEM: 1AM(M5 customized available) Insulation grade: F |
| Protection class | hosit :IP54,or IP 55;push button:IP65 |
| Noise | 81dB. |
Details of Electric Chain Hoists:
1. Shell
It is made of light aluminum shell, light but hard. The cooling fin
is specially designed to ensure quick heat dissipation with the
rate up to 40% and continuous service.
The integral enclosed structure is applicable to place like
chemical plant and electroplate factory.
2.Side magnetic braking device
The magnetic force generator is the latest design which is featured
for generating magnetic force.
It allows instant brake as soon as the electric power is cut off.
Thus the braking safety while loading is guaranteed.
3.Limit switch
The limit switch device is installed where the weight is lifted on
and off to make the motor to stop automatically so as to prohibit
the chains from exceeding for safety.
4.Chain
The chain shall adopt the imported FEC80 ultra heat-treatable
aluminum alloy chain.
It can be safely used in poor environments such as rain sea water
and chemicals.
5.Hook
It is hot forging with perfect strength that is hard to break. The
operation safety of the lower hook is ensured by its 360 degrees
rotation and safety tongue piece.
6.Support frame
The loading support frame consists of two steel plates, which is
extremely sturdy.
7.Transformer
24V/36V transformer device. The device is used to prohibit
unexpected accidents caused by electric leakage and guarantees
the safe uses while raining.
8. Electromagnetic contactor
Electromagnetic contactor can be used safely under high frequency.
9.Inverse phase sequence protecting device
It is the special electrical installation which controls the
circuit not to work in case of wiring error in the power supply.
10. Push button
Waterproof push button is applied. It is light and durable
Technical Parameters
| Model | SSDHL | |||||
| 30-12S | 30-12D | 35-14S | 35-144D | 50-20S | 50-20D | |
| Capacity(t) | 30t | 35t | 50t | |||
| Lifting Speed(m/min) | 0.9 | 0.9/0.3 | 0.75 | 0.75/0.25 | 0.55 | 0.6/0.2 |
| Motor Power(Kw) | 3.0*2 | 3.0*2/1.0*2 | 3.0*2 | 3.0*2/1.0*2 | 3.0*2 | 3.0*2/1.0*2 |
| Rotation Speed (r/min) | 1440 | 2880/960 | 1440 | 2880/960 | 1440 | 2880/960 |
| Insulation Grade | F | |||||
| Power Supply | 3P 220V ~ 690V | |||||
| Control Voltage | 24V/36V/48V | |||||
| No. of Chain | 12 | 12 | 14 | 14 | 20 | 20 |
| Spec. of Load Chain | ø11.2 | |||||
| Net Weight(Kg) | ||||||
LONGEST HISTORY ANDLONGFEVITY - TXK is one of the oldest established electric chain hoist manufacturer in China, with almost 20-years.
LARGEST FACTORY AND PRODUCTION CAPABILITY - TXK factory is th ebiggest factory covering more than 56,000 square meter terriory.
WEDEST PRODUCTS AND SERVICE PROVIDING - TXK can provide eidest products items include electric & manual lifting equipments.
RICHEST EXPERIENCE IN WORLD BUSINESS - TXK has more than 10-years experience on international trade bussiness.
FASTEST LEAD TIMES - TXK factory is equipped with most effcient producing line which handled by skillful workers.
FULLEST CERIFICATIONS - TXK factory and products are well certified by CE, GS, TUV, ISO, SGS, ext.
HIGHRST REPUTATION - TXK products are well sold in more than 50 contries.
