Jaili Machinery Co., Ltd. |
|
TXK electric chain hoist has been well sold in more than 50 countries in past years and win a good requtation.
Compared with other chinese suppliers,TXK brand electric chain hoist with more advantages:
1. Full Certificates such as CE,GS,TUV,ISO,SGS,etc.
2. Almost all spare parts was produced by ourselves.
3. Push button,remote control is imported from Taiwan.
4. High reputation in Europe,America,the Middle East,Africa and Southeast Asia.
Specification
Electric Chain Hoist With Electric Trolley | |||||
Type | 0.5-01 | 01-01 | 02-01 | 03-02 | |
Capacity(t) | 0.5 | 1 | 2 | 3 | |
Standard Lifting Height(m) | 3 | 3 | 3 | 3 | |
Lifting Speed(m/min) | 6.8 | 6.6 | 6.6 | 4.4 | |
Lifting Motor | Power(kw) | 0.75 | 1.5 | 3 | 3 |
Rotation Speed(r/min) | 1440 | 1440 | 1440 | 1440 | |
Phases | 3 | 3 | 3 | 3 | |
Voltage(v) | 200-660 | 200-660 | 200-660 | 200-660 | |
Frequency(Hz) | 50/60 | 50/60 | 50/60 | 50/60 | |
Operating Motor | Power(kw) | 0.4 | 0.4 | 0.4 | 0.75 |
Rotation Speed(r/min) | 1440 | 1440 | 1440 | 1440 | |
Operating Speed(m/min) | 11/21 | 11/21 | 11/21 | 11/21 | |
Phases | 3 | 3 | 3 | 3 | |
Volatge(v) | 200-660 | 200-660 | 200-660 | 200-660 | |
Frequency(Hz) | 50/60 | 50/60 | 50/60 | 50/60 | |
Chain Turns | 1 | 1 | 1 | 1 | |
Chain Specification | Ø6.3 | Ø7.1 | Ø10.0 | Ø10.0 | |
Test Load(t) | 0.625 | 1.25 | 2.5 | 3.75 | |
Weight(kg) | 47 | 61 | 115 | 122 | |
I-Beam(mm) | 58-153 | 58-153 | 82-178 | 100-178 | |
Weight Added with 1m Higher(kg) | 0.81 | 1.1 | 2.3 | 2.8 |
1. Shell
It is made of light aluminum shell,light but hard.The cooling fin is specially designed to ensure quick heat dissipation with the rate up to 40% and continuous service.
The integral enclosed structure is applicable to place like chemical plant and electroplate factory.
2. Side magnetic braking device
The magnetic orce generator is the latest design which is featured for generating magnetic force.
It allows instant brake as soon as the electric power is cut off.Thus the braking safety while loading is guaranteed.
3. Limit switch
The limit switch device is installed where the weight is lifted on and off to make the motor to stop automatically so as to prohibit the chains from exceeding for safety.
4. Chain
The chain shall adopt the imported FEC80 ultra heat-treatable aluminum alloy chain.
It can be safely used in poor environments such as rain sea water and chemicals.
The chain bag is light,handsome and durable.
5. Hook
It is hot forging with perfect strength that is hard to break.The operation safety of the lower hook is ensured by its 360 degrees rotation and safety tongue piece.
6. Support frame
The loading support frame consists of two steel plates,which is extremely sturdy.
7. Ttransformer
24V/36V transformer deveice .The deveice is used to prohibit unexpected accidents caused by electric leakage and guarantees the safe uses while raining.
8. Electromagnetic contactor
electromagnetic contactor can be used safely under high frequency.
9. Inverse phase sequence protecting device
It is the special electrical installation which controls the circuit not to work in case of wiring error in the power supply.
10. Push botton
Waterproof push botton is applied.It is light and durable.