Active Member
|
[China]
Address: No. 6 B2 Road, Zigong City, Sichuan Province
Contact name:Philippe
Zigong Xingyu Cemented Carbide Dies & Tools Co., Ltd. |
|
|
Reliable Supplier 20 Years YG6 Tungsten Carbide Saw Tips For Stump Grinder Teeth
Cemented carbide is a composite material composed of a refractory metal compound (hard phase) and a binder metal (bonded phase) produced by powder metallurgy.
The present invention relates to a cemented carbide with excellent properties for tools for woodworking. This has been achieved by using a WC powder with extremely fine grain size and cobalt and/or nickel powders made from the polyol process. The cemented carbide is particularly useful for the machining of chip board, particle board and medium and high density fibreboard (MDF/HDF).
1. Woodworking tungsten carbide insert, blanks for profile
2. Woodworking dowel drill, hinge drill
3. TCT planer knife, solid carbide planer knife(the longest reches
460mm)
4. Grade K05 to K30
Grade List
| ISO | Grade | Typical Property Values | ||||
| Density (g/cm³) | Bending Strength (N/mm³) | Hardness HRA | Performance & Applications | Equivalent to ISO | ||
| K | YG813 | 14.4 | 2200 | 92 | Good wear resistance,higher bending strength and higher adhesion.Resistance to bonding maching of refractory alloys,stainless steel and high manganese steel,etc. | K10-K20 /M20 |
| YG610 | 14.7 | 2000 | 93.5 | Good thermal strength and high wear resistnace.Continuous or intermittent cutting of cast irons,refractory alloys and hardened-steel. | K01-K10 | |
| YT726 | 14.2 | 1800 | 93 | High red hardness and wear-resistance.Turning and milling of chilled cat irons,alloy cast irons and hardend-steel. | K05-K10 /M20 | |
| YG6X | 14.9 | 2100 | 92.5 | High wear resistance and higher,strength.Maching of chilled alloy cast irons and refractory alloy steel or finishing of common cast irons. | K10 | |
| YG6A | 14.9 | 1850 | 93 | Good wear resistance .Semi-finishin of chilled cst iron,nonferrous metals & their alloys;semi-finishing and finishing of hardened steel,alloy steel. | K10 | |
| ZK20 (YG6) | 15 | 2100 | 91.1 | High wear-resistane and better,impact and shock resistance higher than YG3X.Semi | K15-20 | |
| ZK30 (YG8) | 14.7 | 2100 | 90 | High strength and good,impact and shock resistance,but wear resistance and cutting speed comparatively lower.Roughing of cast irons,non-ferrous metals & their alooys as well as non metallic materials at low cutting speed. | K30 | |
| ZK10UF | 14.8 | 2500 | 93 | Semi-finishing and finishing of cast irons and nonferrous metals. | K05-K15 | |
| ZK20UF | 14.6 | 2700 | 92.7 | Semi-finishing and roughing of cast iron and non-ferrous metals. | K05-K15 | |
| ZK30UF | 14.4 | 2800 | 91.7 | Superior toughness and high hardness .Finishing and rigid milling of cast irons and non-ferrous metals,ideal for hole-machining tools. | K20-K40 | |
| YG522 | 14.3 | 2000 | 92.5 | Good wear resistance and high strength.Specially suitbale for maching of bamboo and wood.Also suitable for machining of non-ferrous metal and nonmetallic material,with long life time. | K15-K30 | |
| YG546 | 14.6 | 2700 | 90.5 | Good toughness,high strength,capable of resisting high impact load .Roughing of stainless steel and cast irons. | K30-K40 | |
| YG3X | 15.2 | 1450 | 93.6 | Best wear resistance among W-Co alloys impact toughness comparatively low.High speed finishing of small chip section of cast irons,non-ferrous metals& their alloys,hardened-steel and alloy steel. | K01 | |
| ISO | Grade | Typical Property Values | ||||
| Density (g/cm³) | Bending Strength (N/mm³) | Hardness HRA | Performance & Applications | Equivalent to ISO | ||
| M | YT767 | 13.1 | 1800 | 92.8 | High wear resistance and high red hardness, strength and resistance to plastic deformation.Continuous or intermittent cutting of manganese steel and stainless steel. | M10-M20 |
| ZP30.2 | 13.1 | 1800 | 92.8 | High wear resistance and high resistance to plastic derormation.Continuous or intermittent cutting of manganese steel and stainless steel. | M10-M20 | |
| YW1 | 13.4 | 1700 | 92.8 | High red hardness,resistant to impact load.A versatile grade.Machining of common steel,cast irons and hard to machine materials such as refractory steel.manganese steel and stainless steel. | M10 | |
| YW2A | 13 | 1950 | 92 | High red hardness and high strength,resisting high impact load.A versatil grade rough,Machining and seni-finishing of cast irons and hard to machine materials such as refractory steel,manganese steel,stainless steel and advanced alooy steel. | M15 | |
| YW2 | 13.3 | 1800 | 92 | High wear resistance ,strength comparatively higher and resistant to high impact load .roughing and simi-finishing of common steel,cast irons as well as refractory steel,manganese steel,stainless steel and high manganese steel,etc. | M20 | |
| ISO | Grade | Typical Property Values | ||||
| Density (g/cm³) | Bending Strength (N/mm³) | Hardness HRA | Performance & Applications | Equivalent to ISO | ||
| P | YT30 | 9.5 | 1200 | 93.2 | High wear reisistance but lower strength and impact toughness.Fnishing of carbon steel and alloy steel,for instance fine turning,fine boring and fine reaming of their small chip sections. | P05 |
| YT15 | 11.3 | 1550 | 92.5 | Wear-resistance higher than YT5, but impact toughness lower thatn YT5.Semifinishing of the medium chip sections of steel,cast steel and alloy steel or finishing of small chip sections. | P10 | |
| YT14 | 11.4 | 1650 | 91.8 | High strength and good impact & shock resistance.Rough turning and rough milling of carbon steel and alloy steel during continuous cutting or medium to fine turning during intermittent cutting. | P20 | |
| YT5 | 12.9 | 2000 | 90.4 | Best strength and high impact & shock resistnace among WC-Co-Ti alloys but lower war resistance .Rough turning rough planing and semi-finish planing of carbon steel and alloy steel (including forged steel parts,stamped parts and cast iron surfaces)during inter mittent cutting. | P30 | |
| YT715 | 11.3 | 1500 | 92.5 | High red hardness and wear resistance .Semi-finishing and finishing of alloy steel with high strength. | P10-P20 | |
| YT758 | 13.3 | 2100 | 92.4 | Good hardnss under high temperature and good wear resistance.Continuous or intermittent cutting of alloy steel with super strength. | P10-P20 /M20 | |
| YT798 | 12.3 | 1900 | 92.2 | Good toughness and high resistance to thermal shock and plastic deformation.Molling os structure alloy steel,tool alloy steel,manganese steel and stainless stel. | P20-P25 /M20 | |
| YT535 | 12.7 | 2100 | 90 | Wear resistance ,red hardness better than YT540 and higher strength.Continuous rough turning and milling of cast of cast or forged steel. | P25-P35 | |
| ZP10 | 11.2 | 2100 | 92 | Higher wear resistance, strength and red hardness,Semi-finishing and finishing of steel,cast steel,forgeable cast iron and continuous nodular cast iron.Also suitable for profiiling,threading and milling. | P10-P20 | |
| ZP20 | 11.5 | 1650 | 91.8 | Higher wear resistance and strength .Roughing and semifinishing of steel,cast steel,forgeable cast iron and continuous nodular cast iron. | P15-P20 | |
| ZP25 | 12.6 | 1850 | 91 | Good toughness,Rough turning,milling,planing and depth hole drilling of carbon steel,cast steel,manganess steel and alloy steel. | P20-P30 | |
| ZP35 | 12.7 | 2220 | 91 | A versatile grade,high red hardness,strength and resistance to impact and thermal shocking.Roughing and strong cutting of steel and cast steel. | P30-P40 | |
| Type | Dimension(mm) | Approx unit weighting(g) | ||||||
| L | t | s | ɑ | YG6 | YG8 | YT5 | YT14 | |
| E4 | 10.0 | 4.0 | 2.5 | / | 1.4 | 1.4 | 1.2 | 1.1 |
| E5 | 12.0 | 5.0 | 3.0 | / | 2.5 | 2.5 | 2.2 | 1.9 |
| E6 | 14.0 | 6.0 | 3.5 | / | 4.1 | 4.1 | 3.6 | 3.1 |
| E8 | 16.0 | 8.0 | 4.0 | 9° | 6.8 | 6.8 | 5.9 | 5.2 |
| E10 | 18.0 | 10.0 | 5.0 | 9° | 11.6 | 11.5 | 10.1 | 8.9 |
| E12 | 20.0 | 12.0 | 6.0 | 9° | 17.8 | 17.7 | 15.5 | 13.7 |
| E16 | 22.0 | 13.0 | 7.0 | 9° | 29.4 | 29.4 | 25.3 | 22.3 |
| E20 | 25.0 | 20.0 | 8.0 | 9° | 46.5 | 45.2 | 39.5 | 34.8 |
| E25 | 28.0 | 25.0 | 9.0 | 9° | 68.5 | 68.0 | 67.3 | 59.3 |
| E32 | 32.0 | 32.0 | 10.0 | 9° | 107.0 | 107.0 | 92.0 | 82.0 |
| Type | Dimension(mm) | Approx unit weighting(g) | ||||||
| l | t | s | e | YG6 | YG8 | YT5 | YT14 | |
| A106 | 6.0 | 5.0 | 2.5 | / | 1.1 | 1.1 | 1.0 | 0.9 |
| A108 | 8.0 | 7.0 | 3.0 | / | 2.6 | 2.5 | 2.1 | 1.9 |
| A110 | 10.0 | 6.0 | 3.5 | 0.8 | 2.9 | 2.8 | 2.4 | 2.2 |
| A112 | 12.0 | 10.0 | 4.0 | 0.8 | 6.8 | 6.6 | 5.7 | 5.2 |
| A114 | 14.0 | 12.0 | 4.5 | 0.8 | 10.7 | 10.5 | 8.9 | 8.2 |
| A116 | 16.0 | 10.0 | 5.5 | 0.8 | 12.3 | 12.0 | 10.5 | 9.8 |
| A118 | 18.0 | 12.0 | 7.0 | 0.8 | 21.3 | 20.8 | 17.5 | 16.3 |
| A118A | 18.0 | 16.0 | 6.0 | 0.8 | 24.7 | 24.3 | 21.0 | 19.7 |
| A120 | 20.0 | 12.0 | 7.0 | 0.8 | 23.2 | 22.8 | 20.0 | 18.6 |
| A122 | 22.0 | 15.0 | 8.5 | 0.8 | 39.2 | 38.5 | 33.0 | 30.6 |
| A122A | 22.0 | 18.0 | 7.0 | 0.8 | 39.2 | 38.5 | 32.8 | 30.5 |
| A125 | 25.0 | 15.0 | 8.5 | 0.8 | 44.5 | 43.7 | 36.5 | 34.0 |
| A125A | 25.0 | 20.0 | 10.0 | 0.8 | 71.0 | 69.8 | 58.0 | 53.8 |
| A130 | 30.0 | 16.0 | 10.0 | 0.8 | 66.4 | 65.3 | 56.5 | 51.7 |
| A136 | 36.0 | 20.0 | 10.0 | 0.8 | 98.2 | 96.8 | 81.0 | 75.2 |
| A140 | 40.0 | 18.0 | 10.5 | 1.2 | 105.6 | 103.8 | 88.0 | 81.7 |
| A150 | 50.0 | 20.0 | 10.5 | 1.2 | 149.0 | 146.0 | 125.0 | 116.0 |
| A160 | 60.0 | 22.0 | 10.5 | 1.2 | 197.0 | 193.0 | 168.0 | 156.0 |
| A170 | 70.0 | 25.0 | 12.0 | 1.2 | 298.0 | 293.0 | 257.0 | 239.0 |
| Type | Dimension(mm) | Approx unit weighting(g) | |||||||||
| Right | Left | l | t | s | r | rε | e | YG6 | YG8 | YT5 | YT14 |
| A208 | / | 8.0 | 7.0 | 2.5 | 7.0 | 0.5 | / | 1.4 | 1.4 | 1.3 | 1.3 |
| A210 | / | 10.0 | 8.0 | 3.0 | 8.0 | 10.0 | / | 2.8 | 2.8 | 2.5 | 2.2 |
| A212 | A212Z | 12.0 | 10.0 | 4.5 | 10.0 | 1.0 | 0.8 | 5.4 | 5.3 | 4.5 | 4.2 |
| A216 | A216Z | 16.0 | 14.0 | 6.0 | 14.0 | 1.0 | 0.8 | 13.0 | 12.8 | 11.3 | 10.5 |
| A220 | A220Z | 20.0 | 18.0 | 7.0 | 18.0 | 1.0 | 0.8 | 23.7 | 23.3 | 20.8 | 18.9 |
| A225 | A225Z | 25.0 | 20.0 | 8.0 | 20.0 | 1.0 | 0.8 | 39.9 | 39.2 | 34.7 | 32.6 |
| Type | Dimension(mm) | Approx unit weighting(g) | ||||||||||
| Right | Left | l | t | s | b | r | Φ | Φ 1 | YG6 | YG8 | YT5 | YT14 |
| A515 | A515Z | 15.0 | 10.0 | 4.5 | 5.0 | 10.0 | 45° | 40° | 7.2 | 7.0 | 5.9 | 5.3 |
| A518 | A518Z | 18.0 | 12.0 | 5.5 | 4.0 | 12.0 | 45° | 50° | 11.4 | 11.3 | 9.8 | 8.7 |
Application Scene
Production Process
FAQ
Q1: How long is your delivery period?
A1: It depends on specific conditions. However, it could be 10 to 15 days on average.
Q2: Do you offer samples?
A2: Yes, we do offer samples. However, buyers need to pay for the freight charge. In addition, whether samples are free or not depends on the quantity you buy.
Q3: How do you pack the products?
A3: In general, we use wood, plastic or carton boxes. We also put some soft materials inside to prevent possible damage on products.
Q4: How much advance payment do I need to make?
A4: If the products you buy are in stock, you need to make full payment; if the products are out of stock, you need to make about 50 percent of full payment and then we will start the production process. However, you still need to pay the rest of charges before we deliver the products.
Q5: What kinds of payment do you accept?
A5: In addition to the patterns of payment shown above, you can discuss with us about in which way you would like to pay.
Please contact us if you have any other questions.
