Active Member
|
[China]
Address: No. 6 B2 Road, Zigong City, Sichuan Province
Contact name:Philippe
Zigong Xingyu Cemented Carbide Dies & Tools Co., Ltd. |
|
|
Shaft Sleeve Bearing In Oil Field Utility Tungsten Carbide Tube Bushing
Cemented Carbide bushing types
Tungsten Carbide Press Fit Bushing: These bushings can be made with or without heads. The bushing is not replaced during the life of the jig.
Tungsten Carbide Fixed Renewable Bushings: Carbide bushings with “F” or “XF” locks. For use where several bushings will be replaced during the life of the jig. They can be replaced without removing the fixture from the machine.
Tungsten Carbide Direct Coolant Bushings: Endurance Carbide produces several carbide bushings of all types, grades, and sized to specifications. Bushings will improve cooling and chip flushing during the drilling process and improve the life of the drill.
Tungsten Carbide Gun Drill Insert Bushings: Manufactured to your specific ID sizes and proper tungsten carbide grade to meet your requirements. The ID, OD, and face of the GDI tungsten carbide bushing are ground concentric and square within 0.0002 T.I.R.
For more information call 0813-5107175 for more details on how tungsten carbide bushings can be used in your manufacturing setting. We can create parts to your specifications.
Grade List
| Grade | ISO Code | Chemical Composition(%) | Physical Mechanical Properties (≥) | Application | ||||
| WC | Co | Density g/cm3 | Hardness(HRA) | T.R.S N/mm2 | ||||
| YG3 | K01 | 97 | 3 | 14.90 | 91.00 | 1180 | Suitable for finishing of cast iron,non-ferrous metals,alloys and non-metallic materials,and semi-finishing vehicles for intermittent cutting. | |
| YG6 | K10 | 94 | 6 | 15.10 | 92.00 | 1420 | Finishing of chilled hard alloy cast iron and heat resistant alloy steel and ordinary cast iron. | |
| YG6X | K20 | 94 | 6 | 15.10 | 91.00 | 1600 | Cast iron, non-ferrous metals and alloys, non-metallic materials, medium to cutting, semi-finishing and finishing. | |
| YG8 | K20-K30 | 92 | 8 | 14.90 | 90.00 | 1600 | Suitable for casting of cast iron, non-ferrous metals and their alloys and non-metallic materials, roughing of sections and rough cutting. | |
| YG10 | K40 | 90 | 10 | 14.70 | 89.00 | 1900 | Suitable for the production of drawing dies, wear parts and stamping parts and cores for hard alloy automatic presses. | |
| YG10X | K40 | 89 | 10 | 14.70 | 89.50 | 2200 | Suitable for small diameter micro drills, end mills, rotary boring tools, etc. | |
| YG15 | K30 | 85 | 15 | 14.70 | 87.00 | 2100 | Forging, perforating and stamping tools for steel bars and steel tubes with high compression ratios and working under large stresses. | |
| YG20 | K30 | 80 | 20 | 13.70 | 85.50 | 2500 | Stamping die, stamping watch parts, musical instrument spring piece. | |
| YG20C | K40 | 80 | 20 | 13.70 | 82.00 | 2200 | punching battery case, toothpaste skin mold, small size steel ball, screw, nut stamping die, hot rolling twist drill bit plate. | |
| YG30 | G60 | 70 | 30 | 12.80 | 82.00 | 2750 | Production of standard parts, bearings, tools and other industries for cold heading, cold punching, cold pressing die. | |
Details Carbide Bushing
| Deimensions of A Type Straight Sleeves (mm) | ||||
| Type No. | D | d | H | C |
| XA1 | 14.5-20 | 12.16 | 6.0-10.0 | 1.3 |
| XA2 | 12.5 | 3.5-7.0 | 12.7 | 4.5 |
| XA3 | 21-60 | 15-50 | 51 | 3 |
| XA4 | 75-130 | 60-115 | 55-100 | 6 |
| XA5 | 140-300 | 120-200 | 60-150 | 10 |
| Deimensions of A Type Straight Sleeves (mm) | ||||
| D | d | C | F | H |
| 13.0-59.0 | 3.0-51.0 | 8.0-556.0 | 22.5 | 25.5 |
| 35.0-51.0 | 22.0-37.0 | 28.0-41.0 | 11.0-16.0 | 15.0-25.0 |
Product Application Scene
Production Process
FAQ
Q1: Are you the real reliable factory or just a trader company?
A1: We are the REAL factory located in Zigong,China, we currently have over than 100 employees.
Q2: There have many companies called they are 'factory', how can I
identified the truth?
A2: tips1, Familiar with the processing equipments which are for
produce to your required products, and visit their company as well
as their processing equipments.
tips-2, Appoint one of your reliable friend who is in China to
visit their factory.
tips-3, Check their Certs and proof of its authenticity, instead to
only check the PS version superficially.
tips-4, Searching on the Satellite maps to check their location.
tips 5, In fact, almost every company can apply for the Certs, but,
only the factory can get the patents (such as: invention patent,
utility patent or design patent) for their product, and a small
factory or a trading company havn't the R&D support to apply
patents.
tip-6, Factory are always available to take the photos at any time
during the production process.
Q3: Can you give warranty of your products?
A3: Yes, we 100% satisfaction guarantee on all items. we have the
independent nspection Dep.with the complete advanced product
quality instrumentation to carry out IQC, PQC & FOC, the
detailed inspection pictures and report will be sent to you for
confirmation before delivery.
In case there have quality problem, just pls kindly to provide the
pictures to show the problem by email,
we will 100% responsible for our problems and to provide the
replacements to you at our costs.
Q4: Can we get support if we have our own market position?
A4: Please inform us your detailed mind on your market demand, we
will discuss and propose helpful suggestion for you, to find the
best solution for you.
